Used Bekomat Condensate Drain for sale (1,551)

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Dcsdpfx Ajzgci Esa Hjl Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully automatic PLC parts cleaning system The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without dismantling. The unit is space-saving, quiet and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz, 16A CEE 5p 6h plug Drain: 1 1/4" outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Whole components (without dismantling) Quality seals: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heater: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 kg Application area: The RWR 80 L KST fully automatic PLC has been developed for the field of plastic injection molding Dcsdpfjzgclmsx Aa Hol and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system begins to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically, after the instructions displayed on the screen have been confirmed. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: excellent (used), ESPEC TSA-72EL-A Temperature Shock Chamber Manufacturer: ESPEC Corporation Type: TSA-72EL-A Machine Type: Temperature Shock Chamber / Thermal Shock Chamber (2-Zone) Design: Water-cooled For sale is a used ESPEC temperature shock chamber, type TSA-72EL-A. This unit is suitable for reproducible temperature cycling and thermal shock testing in research, development, quality assurance, as well as for testing electronics, automotive components, aerospace parts, and materials. The switchover between the hot and cold chambers is performed automatically via a 2-zone damper system. Technical Data Test chamber volume: approx. 70 liters Internal dimensions (W x H x D): 410 x 460 x 370 mm External dimensions (W x H x D): 1,310 x 1,900 x 1,470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Precooling temperature: up to -75 °C Heating time: ambient temperature to +200 °C within approx. 15 minutes Cooling time: ambient temperature to -70 °C within approx. 40 minutes Temperature recovery time: ≤ 5 minutes Max. test load: 30 kg evenly distributed Cable entry: Ø 50 mm Compressed air supply: 0.4 to 0.7 MPa (4 to 7 bar) Refrigeration system / Power supply Refrigeration system: Mechanical cascade refrigeration system Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Condenser: Water-cooled Mains connection: AC 380 / 400 / 415 V 3 phases / 50 Hz Max. current draw: 45 A Equipment 10.4" TFT color touchscreen PID temperature control Program memory (RAM/ROM) Trend graph Alarm history RS-485 interface Eco mode Automatic defrost Vertical sliding door Dcsdozhkfqspfx Aa Hsl Stainless steel test chamber 2 stainless steel test inserts Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulation fan Pneumatic damper switchover Cable entry Ø 50 mm Applications Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Materials testing Component testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply ESPEC TSA-72EL-A Temperature Shock Chamber 2 stainless steel test inserts Accessories as shown in the pictures Scope of supply as pictured. Subject to change, errors and prior sale.

Condition: used, power: 120 kW (163.15 HP), first registration: 08/2012, fuel type: diesel, color: orange, empty load weight: 5,990 kg, driver cabin: other, gearing type: other, Year of construction: 2012, operating hours: 4,850 h, number of seats: 2, * Compact sweeper CLEANGO, standard configuration for Germany, 50 km/h * Speed 50 km/h * Disc brakes on the front axle with dual brake calipers * Proportional parking brake Djdpfx Aajzcfzwj Hjcl * Load-dependent valve on the rear axle (required for all 50 km/h machines) * Driver's seat with air suspension * Seat belts * Radio with USB and SD card connection * Heated exterior mirrors * Additional work mirror * Colored rear view monitoring system with TFT monitor * Air conditioning * Tachograph * Cup holder * Independent control of the rotary brush (raise/lower, ground pressure, inclination) * Third front brush Cleango 500 * Weed brush for the 3rd brush * Additional work light (for the 3rd brush) * Suction nozzle with rubber insert * Suction pipe with rubber insert * Preparation for subsequent installation of the hand suction hose * Water return system Cleango 500 * Container door with high and low-level water drain valves (top and bottom) * Water filling hose, Germany * Standard paint RAL 2011 municipal orange * Noise reduction package (only for exhaust fan) * Automatic central lubrication system instead of manual central lubrication * Protection for the rotating beacon * Oil service and maintenance performed at 4,850 operating hours Other: * Trade-in and purchase of vehicles and machines possible. * Selling price excluding transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer is non-binding. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. Dcedpszg Dlbefx Aa Hol 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. Dcjdpfx Aajzii Dho Hjl General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Year of construction: 2020, condition: good (used), Well-maintained Leica DM IL LED Cellfactory inverted microscope, suitable for cell culture, phase contrast, and routine live-cell observation. Configuration: Dcodpozhia Hofx Aa Hsl HI PLAN 4x/0.10 PH0 objective HI PLAN I 20x/0.30 PH1 objective HI PLAN I 20x/0.30 PH1 objective HI PLAN I 40x/0.50 PH2 objective S40/0.45 Leica condenser (521251) HC C-mount 0.50x Slider HC Plan 10x/20 eyepiece(s) Flexacam C1 with remote control Various accessories A robust setup for laboratories, biotechnology, research, and cell culture applications.

Condition: excellent (used), functionality: fully functional, Anton Paar Physica MCR 301 Modular Rotational Rheometer Manufacturer: Anton Paar GmbH Type: Physica MCR 301 Machine Type: Modular Rotational and Oscillatory Rheometer Country of Origin: Austria (Graz) For sale is a used Anton Paar Physica MCR 301 rotational rheometer. This laboratory device is suitable for the rheological characterization of liquids, pastes, polymers, dispersions, emulsions, and other materials in research, development, quality control, and industrial material testing. Technical Data Measuring Principle: Rotational and Oscillatory Rheometer Drive: Air-bearing EC servo motor (Air Bearing Technology) Integrated normal force measurement Modular measuring system for various measuring geometries Power Connection: AC 100–240 V Power Frequency: 50–60 Hz Power Consumption: 850 W Dimensions: approx. 610 × 420 × 670 mm (L × W × H) Weight: approx. 48 kg Dcjdpfx Aaozicwue Hsl Measuring Functions Rotational measurements Oscillatory measurements Viscosity measurements Flow curves Shear stress Creep tests Relaxation measurements Amplitude sweeps Frequency sweeps Material characterization Software / Interfaces Anton Paar Rheoplus Software (Original CD) Device driver and license diskette included RS-232 interface Ethernet interface (depending on the configuration) Operation via LCD display and foil keypad Environmental Conditions Operating Temperature: 15 °C to 35 °C Recommended ambient temperature: 23 °C ±3 °C Storage Temperature: −20 °C to +50 °C Relative Humidity: 20–60 % (non-condensing) Equipment Air-bearing precision drive Measuring head Measuring platform LCD display Electronic control Rheoplus software CD Original operating manual Documentation folder License diskette Connection cable Accessories as shown in the pictures Application Areas Rheology Material testing Quality assurance Research and development Chemical industry Pharmaceutical industry Cosmetics industry Food industry Polymer technology Universities and testing laboratories Condition Used Optical condition as shown in the pictures. Scope of Delivery Anton Paar Physica MCR 301 Original Rheoplus software CD Original operating manual Documentation folder License diskette Connection cable Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2025, Technical details: content: 1000 cbm capacity in bar: 11 Dcodpfx Aajy I Rr Te Hsl total power requirement: - kW tank capacity: 1000 l operating pressure: 11 bar dimensions of the machine approx. HxWxD: 2,32 x 0,8 x 0,8 m weight: 260 kg • Function: Serves as a buffer and storage medium in compressed air stations, separates condensate, and reduces the frequency of compressor cycling. • Quality standards: Manufactured in accordance with the European Pressure Equipment Directive (2014/68/EU) or 2014/29/EU (simple pressure vessels) as well as the AD 2000 guidelines. • Surface protection: Typically hot-dip galvanized inside and out in accordance with DIN EN ISO 1461 for maximum corrosion protection and durability. • Operating data: Designed for temperatures typically ranging from -10 °C to +50 °C (in some cases up to +80 °C) and a standard operating pressure of 11 bar with a test pressure of 16 bar. • Design: Vertical design with welded longitudinal and circumferential seams. *

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm Dcjdsy I Srzepfx Aa Hsl MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: used, mileage: 556,659 km, power: 350 kW (475.87 HP), first registration: 07/2020, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, color: red, gearing type: automatic, emission class: euro6, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Vehicle No.: 118-26 Mercedes-Benz 2548 Actros L 6x2 BDF Low Liner Body: Interchangeable body / Sales van with shelving and tarpaulin Matching tandem trailer available at an extra cost! First registration: 07.2020 * 2 x bunk beds * 1 x seating area * Cool box * 2 x tank 500+500 liters * Lift axle * Tire tread approx. 50-60% Dcodezbv Ixepfx Aa Hsl * German vehicle TANDEM TRAILER ACKERMANN available at an extra cost! Special equipment: Airbag driver side, alarm system, trailer stabilization program TSA, work lights, audio system: digital radio DAB / DAB+, lowered exhaust system, equipment package: Driving, equipment package: Climate, equipment package: Comfort, equipment package: Media, equipment package: Visibility, equipment package: Storage space, batteries arranged one above the other, brake connection standard and DuoMatic, additional air reservoir, air horn, electrical pre-installation in the cab 24V / 100 A, driver assistance system: turning assistant, cab: with air suspension, cab: shaving mirror, cab: smoke detector, transmission 12-speed - type: G 281-12, holder for notebook, folding table in the bulkhead, comfort telephony (Bluetooth) with inductive charging cradle, comfort upper bunk, wide, mudguards 3-part, mudguards 3-part with splash guard, fuel tank: 500 liters aluminum, left, fuel tank: additional tank 500 liters aluminum, right, integrated air intake, air filter with extended service life, air compressor 2-cylinder, engine brake reinforced, PremiumComfort mattress upper, wheelbase 4600 mm, frame overhang 1950 mm, tire pressure control system, reversing warning signal acoustic and warning flashing light (warning signal outside), rear cross member reinforced, key with remote control additional (2), interface fleet management system, drawers under the bulkhead, circuit breaker, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver seat sprung comfort seat, seats in the cab: SoloStar Concept, sound system, additional stabilizer, rear axle / tag axle, steel rims 11.75x22.5 (on front axle), storage compartment outside left, socket 12V / 15 A in the passenger footwell additional, socket 24V / 25 A in the passenger footwell, socket cab 24V, steep shoulder rims 11.75x22.5 (on tag axle, reinforced), preparation for 4 surround cameras (display in the on-board monitor), preparation for additional headlights, curtain sleeper cab, warning device seat belts Additional equipment: Emission standard EURO 6, axle configuration: 6x2, front axle load 8.0 t, Actros 5, Actros cab L, approach / front mirrors heated, trailer brake 2 - line, connections left, trailer socket 24V / 15-pin, exhaust to the right outside, equipment package: Powertrain 2, exterior mirror camera MirrorCam, differential lock rear axle, torque increase 12th gear, air connection in the cab, air reservoir steel, air dryer high, air dryer with condensate monitoring, automatic activation for driving lights (light sensor), driver assistance system: Attention-Assist (fatigue detection sensor), driver assistance system: Autonomous emergency braking assistant (Active Brake-Assist 5), driver assistance system: Lane keeping assist, cab: cab entrance fixed, cab: interior package chrome, cab: tilting device hydraulic, cab: L GigaSpace, 2.50 m, floor level, vehicle outline lights LED, suspension: air / air (full air), electric windows, vehicle without rear window, generator 100 A, regulated, speed limiter, urea tank (AdBlue)

Condition: new, Brand new, factory-fresh stainless steel tank Article number: 10632 Volume: 500 L Type: Standing on 4 legs Height of legs: 540 mm Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Operating pressure as per nameplate: ATM Tank dimensions: Outer diameter: 804 mm Cylindrical height: 990 mm Dcsdpfx Aoza Ei Asa Hjl Overall height: 1385 mm Overall width: 835 mm Overall length: 954 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Features: Nameplate: No 2 x 3/4" socket on the cylinder Distance from drain to bottom: 395 mm

Condition: used, usable tank capacity: 1,300 l, Used stainless steel mixing vessel Motor runs, but the shaft does not rotate. Last application: Chemical industry Item number: 10219 Volume: 1300L Dcjdpjy Uvvqefx Aa Hsl Type: Standing on 3 legs Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Bottom: Klöpper bottom Operating pressure according to nameplate: ATM Dimensions of vessel: Vessel diameter: 1140mm Cylindrical height: 1320mm Overall height: 3400mm Height of legs: 1270mm Distance from drain to bottom: 1180mm Hinged lid: 535 x 1090mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Hinged lid Top pipe, Ø 95mm Various connections on the top Agitator with dispersing disc

Condition: used, mileage: 102,619 km, power: 330 kW (448.67 HP), first registration: 06/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, had accident, navigation system, parking heater, soot filter, Mercedes-Benz Arocs 5 2645 6X4 with tilting hydraulics – Damaged!! Engine runs!! * German vehicle * Euro 6 * Leaf / Air suspension * Automatic transmission * Cruise control * Air conditioning * Refrigerator * 1 folding bed * Multifunction steering wheel Dcsdpfxozh Dhfj Aa Hsl * On-board computer * Virtual cockpit * LED lights front and rear * Air horns on the roof * 1 x LED work light at the rear * Central locking with remote control * Keyless Go * Enhanced engine brake * 1-circuit tilting hydraulics * Hydraulic tank behind the cab * Luxury driver's seat Special equipment: Axle load - measuring device, audio system: Digital radio DAB / DAB+, step with handrail on the roof, equipment package: Comfort, equipment package: Safety, CB radio, cockpit multimedia interactive, air horns (2) on the cab roof, remote query function Remote Online, speed limiter, transmission 12-speed - type: G 230-12, rear lights LED, rear axle bevel gear 233, fuel tank: 290 L Aluminum, left, cool box / refrigerator, air compressor 2-cylinder, mounting plate / saddle plate 40 mm for fifth wheel coupling, mounting plate / saddle plate 40 mm for fifth wheel coupling 36 t, enhanced engine brake, enhanced engine mounting, navigation system, auxiliary drive MB 131-2c, parameterizable special module, frame lowering without bellow residual pressure regulation, frame overhang 750 mm, reversing warning acoustic (warning signal outside), rear window, fifth wheel coupling, low maintenance, headlight cleaning system (SRA), lower bunk, interface fleet management system, seat cover / upholstery: passenger seat velours, seats in the cab: driver's seat backrest foldable, sun visor outside, steel rims 11.75x22.5 (on front axle), socket 12V / 15 A in the passenger footwell additionally, socket 24V in the passenger footwell additionally, preparation / switch for lift axle on the trailer / semitrailer, preparation work light rear panel cab top, preparation for 4 surround cameras (display in the on-board monitor), preparation for rotating beacon, preparation for auxiliary headlights, warning device seat belts, auxiliary heater (water) Further equipment: Emission standard EURO 6, axle configuration: 6x4, front axle load 7.5 t, approach / front mirrors heated, trailer electrical and brake connection high, trailer socket 24V / 15-pole, Arocs 5, step to cab left, battery 170 Ah, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic switch-on for driving lights (light sensor), cab: tilting mechanism hydraulic, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, suspension: front springs 7.5 t, 2 leaves, electric windows, windshield tinted, generator 100 A, urea tank (AdBlue): 60 L, lifting roof manually (steel), body / structure: semi-trailer tractor, comfort central locking system, mudguards 3-part, steering assistance pump unregulated, steering oil cooler, air intake behind the cab, air dryer heated, engine 12.8 L - 330 kW R6 diesel (OM 471), engine variant OM 471, type of use: local transport, wheelbase not defined, wheelbase variant 3300 mm, ramp mirrors, waste heat recovery, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: passenger functional seat, steel rims 9.00x22.5, socket 12V in the passenger footwell, bumper corners front in steel design, tachograph / EC control unit, daytime running lights automatic.

Condition: new, Year of construction: 2026, operating hours: 20 h, functionality: fully functional, machine/vehicle number: RR400FS, area performance: 1,350 m²/h, overall weight: 80 kg, power: 0.3 kW (0.41 HP), battery voltage: 24 V, sweeping width: 350 mm, SCHORR Battery-Powered Scrubber-Dryer RR400FS, Single-Disc Machine With the RR400FS, you can complete wet cleaning and drying in a single pass. The 350 mm wide main brush loosens dirt and removes stubborn residues, while a metered amount of fresh water with cleaning agent is applied. Immediately behind it, the integrated vacuum system sucks up the dirty water. The RR400FS relies on robust and reliable technology without unnecessary frills. It is powered entirely by electricity via a 24V battery system with 32 Ah, which enables approximately 1.5 hours of continuous operation. It can be conveniently charged with the included charger at a standard power outlet. SCHORR Scrubber-Dryer RR400FS – Discover the advantages: Djdpszh Hunjfx Aa Hscl ✓ Compact battery-powered scrubber-dryer for small to medium-sized hard floor areas ✓ Cleaning performance of up to 1,350 m²/h ✓ 350 mm main brush, scrubs and vacuums in one pass ✓ Floor is immediately walkable thanks to the integrated vacuum system ✓ 7-liter fresh water and 12-liter dirty water tank, designed to prevent overflow ✓ Fully electric with 24V/32Ah, up to approximately 1.5 hours continuously ✓ Charger included, charges at a standard power outlet ✓ Well-supported: directly from the manufacturer, large spare parts inventory & workshop service Technical data Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR400FS Model: Electric Scrubber-Dryer Drive: Electric (battery) Weight including battery: 80 kg Tires: PU (non-slip) Wheels, number: 2 Overall length: 900 mm Overall width: 580 mm Overall height: 700 mm Fresh water tank volume: 7 l Dirty water tank volume: 12 l Main brush diameter: 350 mm Area performance: up to 1,350 m²/h Vacuum motor power: 300 W Brush motor power: 310 W Battery voltage/capacity: 24V / 32Ah Operating time: approx. 1.5 hours Charger: Included *Further technical data is available upon request. The scrubber-dryer is designed to be user-friendly and offers an intuitive interface that is easy to understand even for inexperienced users. With its ergonomic design and flexible steering, it enables effortless navigation through narrow spaces, ensuring efficient cleaning with minimal effort. The dirty water tank holds 12 liters, more than the 7-liter fresh water tank. This ensures that no more water is ever taken up than is dispensed at the front. The tank will also not overflow, even if foam forms. Once the work is done, drain the dirty water in a controlled manner, and the compact machine can be quickly stored. Of course, we usually have all the spare parts in stock and can deliver them quickly if you should encounter any problems. If you require technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the device? No problem! We also offer attractive options for this. Just contact us, and we will advise you on the various possibilities. We look forward to your inquiry! We at SCHORR are happy to answer any questions you may have about our scrubber-dryer. You can reach our competent team by telephone or email. We look forward to hearing from you and assisting you with your consultation.

Condition: new, Seppi M. KASTOR hyd to / Stump Grinder / DEMO unit / Year of manufacture: 2023 / In stock & immediately available Price: €26,290.00 net / €31,285.10 gross - Cutting disc width: 0.11 m - Cutting disc diameter: 0.90 m - Overall width: 0.88 m - Depth: 1.80 m - Height: 1.30 m - Weight: 868 kg - Stump grinder for excavator mounting - For removing stumps and tree roots - Grinds tree stumps and roots up to 50 cm deep - For excavators from t - For mounting on various adapter plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier device - Indirect double V-belt drive with 2x5 V-belts - Hydraulically adjustable hood - Protection by double chains - Rotor with 50 fixed, carbide-tipped tools - Color: red RAL3020 · anthracite RAL7021 OPT 074 Two axial piston hydraulic motors F12-80 cm³ with overpressure valve - Displacement in cm³: 2 x 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate in l/min (min-max): 140 – 220 An autonomous hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse that are immediately available! Please contact us for this at . Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. Dcodpfx Ajznru Tja Hsl We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale reserved! = Further information = Unladen weight: 868 kg Please contact Marius Herden for more information.

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment: Base machine Additional cost for radius milling cutter unit with blowing device + extraction system Dcsdpfxozttnfe Aa Hol Additional cost for surface milling cutter unit Additional cost for diamond tools, height = 55 mm, for jointing unit EVA/PUR glue tank with drain function instead of standard glue tank Collection table / pipe bridge Pre-carriage Location: Flörsheim Availability: Immediate

Condition: used, mileage: 340,560 km, power: 260 kW (353.50 HP), first registration: 12/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2026, color: beige, gearing type: automatic, emission class: euro6, total length: 9,790 mm, total width: 2,600 mm, total height: 2,630 mm, loading space length: 7,550 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Special equipment: Schmitz deep-freeze box * Refrigeration unit: Thermo King UT 800 * Temperature recorder * Box side wall: 50 mm * Double-wing doors: 80 mm Feroplast * Storage compartment, high engine tunnel * Axle load measurement device * Front axle load: 8.0 t * Trailer stabilization program: TSA * Audio system: Digital radio DAB / DAB+ * Equipment package: Comfort * Cab: steel-sprung, Comfort * Sun visor, side window, driver's door * Driver's seat: Comfort, air-suspended * Airbag, driver's side * Equipment package: Visibility * Bi-Xenon headlights * Rear lights: LED * Headlight cleaning system (HCS) * Exterior mirror, right, with maneuvering position * Battery: 220 Ah * Brake connection: Standard and DuoMatic * CB radio * Cockpit: Interactive multimedia * Navigation system * Remote query function: Remote Online * High-pressure air unit * Air horn * Electrical pre-wiring in the cab: 24V / 100 A * Driver assistance system: Turning assistant * Transmission: 12-speed - Type: G 211-12 * Manual lift roof (steel) * Automatic climate control * Fuel tank: 290 liters, aluminum, right * Air deflector, roof (lockable) * Engine brake: enhanced * Wheelbase: 5500 mm * Frame overhang: 2700 mm * Reversing warning: acoustic and warning flashing light (external warning signal) * Tail lift switch * Seats in the cab: Driver's seat with massage function * Exterior sun visor * Additional stabilizer: rear axle / trailing axle * Additional 12V / 15 A socket in the co-driver's footwell * 24V / 25 A socket in the co-driver's footwell * Preparation for 4 surround cameras (display in the onboard monitor) Dcedpfx Aezuhlbea Hjl * Preparation for additional headlights * Preparation for additional turn signals * Auxiliary heater (water) * Additional equipment: * Reversing camera * Emission standard: EURO 6D * Axle configuration: 4x2 * Actros 5 * Actros cab: S / M * Approach / front mirrors, heated * Trailer brake: 2-line, connections on the left * Trailer socket: 24V / 15-pin * Exhaust pipe directed to the center of the vehicle * Batteries arranged side by side * Differential lock: rear axle * High-pressure air unit with condensate monitoring * Automatic switching for dipped headlights (light sensor) * Cab: Hydraulic tilting mechanism * Cab: M ClassicSpace, 2.30 m, tunnel 320 mm, cab floor with engine tunnel 320 mm, cab: width 2.30 m, cab variant: M * Storage flap, external, left * Storage compartments with lids behind the driver's and co-driver's seats * Vehicle outline lights: LED * Suspension: Air / Air (full air) * Power windows * Windshield: tinted * Speed limiter * (AdBlue): 60 liters * Comfort locking system * Air intake from the front * Heated air dryer * Engine: 7.7 liters - 260 kW R6 Diesel (OM 936), engine variant OM 936 * Waste heat recovery * Disc brakes: front and rear axles * Key with remote control (2) * Side marker lights: LED, flashing * Seats in the cab: Co-driver's seat * Splash guard, front * Stabilizer: front axle * 12V socket in the co-driver's footwell * Tachograph / EC tachograph * Truck Data Center 7 (fleet management system) * Underrun protection, front * Preparation for toll collection * Preparation for Truck Data Center (fleet management system) * Front axle: curved * Permissible total weight: 18.00 t * Errors, changes and prior sale are subject to change.

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Dcjdpeztar Rsfx Aa Hjl Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: used, mileage: 35,700 km, power: 350 kW (475.87 HP), first registration: 04/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Special equipment: Storage above windshield, lockable, Axle load - measuring device, Axle load front axle 8.0 t, Working lights, Audio system: Digital radio DAB / DAB+, Equipment package: Economy, Equipment package: Climate, Equipment package: Comfort, Equipment package: Media, Equipment package: Safety, Equipment package: Visibility, Exterior mirror right with maneuvering position, CB radio, Compressed air horns (2) on cab roof, Electrical pre-equipment in cab 24V / 100 A, Cab: Extra-Line interior, Cab: Style-Line interior, Cab: with air suspension, Cab: Shaving mirror, Fzg. without MirrorCam exterior mirror camera, 12-speed gearbox - type: G 281-12, Integral rear, Folding table in parapet, Comfort telephony (Bluetooth) with induction charging cradle, Comfort couch top, wide, 3-piece mudguards, Fuel tank: Combi tank aluminum - 720 l diesel + 75 l urea solution (AdBlue), Fuel tank: Additional tank 290 l aluminum, right-hand side, Steering wheel with multifunctional steering wheel, Fuel tank: Additional tank 290 l aluminum, right-hand side, Steering wheel with multifunctional steering wheel. aluminum, right, steering wheel with multifunction (leather), mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, engine brake reinforced, auxiliary drive MB 131-2c, on-board unit for toll collection, wheelbase variant 3700 mm, frame height lowered 25 mm, smoker package, residual heat utilization, retarder, reversing alarm acoustic and hazard warning light (warning signal outside), fifth wheel coupling: Low-maintenance, lubricated lock, key with additional remote control (2), fleet management system interface, drawers under sill, power steering Servotwin, seat cover/upholstery: passenger seat leather, seat cover/upholstery: driver's seat leather, seats in cab: Armrests on both sides of front passenger seat, Seats in cab: front passenger seat Swivel seat comfort, Seats in cab: front passenger seat backrest can be folded down, Seats in cab: driver's seat with massage function, Seats in cab: driver's seat Swivel seat comfort, Sunblind electr. for windscreen, sun blind side windows, driver and passenger door, sound system, storage flap outside left, additional 12V / 15 A socket in passenger footwell, additional 12V volt socket, preparation / switch for lift axle on semitrailer / trailer, preparation for work lights on rear wall of cab above, preparation for additional headlights, curtain for sleeper cab, seat belt warning device Further equipment: EURO 6 emissions standard, Axle configuration: 4x2, Actros 5, Actros cab L, Heated approach/front mirror, Trailer electrical and brake connection low, Trailer socket 24V / 15-pin, Access to cab left, Exhaust to right outside, Equipment package: Powertrain 2, Batteries arranged side by side, Differential lock rear axle, Torque increase 12. Compressed air connection in cab, Compressed air tank steel, Compressed air unit with condensation water monitoring, Compressed air unit medium, Automatic switch-on for headlights (light sensor), Driving assistance system: Attention Assist (drowsiness detection sensor), Driving assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5), Driving assistance system: Lane departure warning system, Cab: rigid cab access, Cab: chrome interior package, Cab: hydraulic tipper, Cab: L BigSpace, 2.50 m, level floor, Vehicle clearance lights LED, Suspension: air / air (full air), Electric windows, Tinted windscreen, Fzg. without rear window, alternator 10 Dcodozuhx Iopfx Aa Hsl

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 101 kW (137.32 HP), type of input current: three-phase, type of cooling: air, overall weight: 796 kg, input voltage: 400 V, total width: 1,180 mm, total length: 2,760 mm, total height: 1,810 mm, warranty duration: 12 months, Aircooled chiller CLIVET WSAT XEE 402 101 KW Cooling capacity: 101 kW / 28.72 tons (12/7 — 35°C) Year of manufacture: 2025 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Сopeland ZP293KZE-TED-456 (scroll) + 1 pcs. Сopeland ZP182KCE-TFD-455 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Dimensions: 2.76x1.18x1.81 m. Weight: 796 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Dcjdpozxqmcefx Aa Hol

Condition: new, External dimensions L x W x H: 1930 x 2080 x 2280 mm Configuration with 2 independent cells, each containing 2 trolleys, for a total of 4 trolleys. Additional dividers included for dividing into multiple cells. Equipped with 2 solid, single-door doors. 2 integrated 720 x 150 mm wall evaporators. 2 refrigeration units supplied, type CAJ 9513 or UN 9232, using R452A refrigerant. External height without floor: 2115 mm Doorway height: 1800 mm Dimensions suitable for 600x800 mm trays Compatible trolley dimensions: 700 x 890 x 1870 mm 2 independent cells with autonomous cycle management Capacity: 2 trolleys per cell (4 trolleys in total) Temperature range: -10°C to +35°C Modular structure without floor (installation on a perfectly level floor) Insulating panels, 60 mm thick, with high thermal performance Interior finish: food-grade aluminum Exterior finish: reinforced aluminum 2 wall evaporators, 720 x 150 mm Heating power: 2200 W Heater resistance: 80% 2 independent refrigeration units Position of units: low Environmentally friendly refrigerant: R452A Professional electronic control: Control Panel 2008 V2 Dedpfx Aaezk Hk Ij Hscl Control panel type: cabinet Electrical supply: 220 V Single-phase – 16 A – 50 Hz 2 solid doors, 895 x 1360 mm Opening: 1 door per door Water drain: external diameter 32 mm Water inlet: 1/4 inch connection (above the chamber) Remote installation possible Delivered disassembled for easy access.

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Year of manufacture: 2018 Machine type: Salt spray chamber / Climate change testing system Test chamber volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray chamber with integrated climate change technology, touch control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideally suited for testing laboratories, the automotive industry, material testing, research, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of manufacture: 2018 Test chamber volume: 1,028 liters Internal dimensions (W × D × H): 1,560 × 645 × 720 mm External dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Power connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical connection: 3P+N+PE 400 Vac 32 A Rated power: 9.4 kW Rated current: 19 A Refrigerant: R134a Refrigerant quantity: 1.30 kg GWP: 1,430 CO₂ equivalent: 1.86 t Max. low pressure: 17 bar(g) Max. high pressure: 25 bar(g) Air-cooled design Ethernet interface Test ranges: Salt spray test: Ambient temperature +5 °C to +50 °C Condensation water test: Ambient temperature +5 °C to +42 °C Climate test: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity range climate test: 20 to 98 % r. F. Humidity range drying / ventilation: < 30 % r. F. Dew point range: +12 °C to +69 °C Consumption data: Water consumption salt spray test: approx. 0.4 l/h Water consumption condensation water test: approx. 34 l Consumption of spray solution: approx. 0.9 l/h Compressed air consumption salt spray test: approx. 1.4 m³/h Compressed air consumption ventilation: approx. 7.0 m³/h Temperature stability: ±1.0 K Equipment: Touchscreen control Annular spray air system Climate change test function according to VDA 621-415 Salt spray test Condensation water test Temperature test Dcsdjzqab Tjpfx Aa Hjl Climate test Drying and ventilation function Air-cooled cooling system Ethernet interface Automatic test programs Transport data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated touch control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2019, condition: used, 2-vessel brewhouse with stainless steel brewing vessels, mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforated weld + internal boiler), insulated, with a gross volume of 15 hl. The kettle is equipped with a continuously adjustable, top-driven agitator. The boiling vapours are extracted by a kettle fan into a vapour condensation pipe fitted with Lechler nozzles. The kettle also features a CIP spray head and a digital thermometer. 2. Mashing and lauter tun, insulated, with a continuously adjustable rake, inlets and outlets for wort and thick mash, spent grain flap, lauter floor (designed as a slotted screen floor), mash/wort pump and digital thermometer. Cleaning nozzles are fitted for internal cleaning and rinsing. For hot trub separation, the vessel also features a tangentially fed whirlpool nozzle. 3. Control cabinet with control panel 4. Various pipework, valves and sensors. The system is equipped with a two-stage plate heat exchanger for wort cooling at 1,000 l/h and a wort aeration device. In addition, a 20-hectolitre insulated stainless-steel tank with a heating jacket and a booster pump is available for use as a hot-water storage tank. Additional title: brewing block with stainless steel brew vessels Mash and wort pan net capacity approx.: 1000 L hot wort Mash and wort kettle inner diameter approx.: 1000 mm Mash and lauter tun inner diameter approx.: 1250 mm Height up to hood door approx.: 1 m Power: 4 kW Voltage: 400 V Frequency: 50 Hz Operation / Control: “Braupilot” HMI control via touch screen Material: Stainless steel 1.4301 Base construction: Thanks to its modular design, the entire brewhouse is very compact and can be integrated individually and space-savingly into the guest area. Features: Mash and wort kettle with bottom heating and internal cooker, mash and lauter tun with whirlpool nozzle (combination vessel), hot water tank, wort cooling, wort areation, fittings, pumps, pipes Dcsdpfxeztwz Ae Aa Hel

Condition: used, Refrigerant Condenser, Liquid Cooler, Güntner Cooler, V-block Cooler, Industrial Radiator, Used Machine Manufacturer: Güntner Model / Type: GFD 080.1D/2x4-MS1D/4P.E Overall dimensions: 5404 x 2400 x 2850 mm Coolant: Ethylene glycol 35 Vol. % Weight: 2694 kg Dedpfxjzkynys Aa Hecl Cooling capacity: 331.7 kW Number of fans: 8 pcs Fan diameter: 800 mm