Used Auma Sgwxc 07.1-F10, Ske0 56-2/80 for sale (86,243)

Condition: good (used), gear motor, electric motor, electric gear motor -Manufacturer: VEM, gear motor with brake Kdsdopu Iuyspfx Akpou -Type: ZG2 BMREA 80 G 8-4 AF -Speed: 40/80 rpm -Power: 0.4/0.7 kW -Design: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Brake: 6.86 Nm -Quantity: 1 pieces available -Price: per piece -Dimensions: 560/200/H265 mm -Weight: 34 kg/piece

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump, radial piston pump -Double hydraulic pump: radial piston pump with clutch -Pump: unfortunately no exact type designation -Part No.: A3918 2 515 105 780 Kdsdpfxopy Rybe Akpeu -Clutch: Kupplungstechnik Rheine PL 350/15/ -Dimensions: see photo technical. drawing -Dimensions: 730/470/H470 mm -Weight: 164 kg

Condition: used, empty load weight: 15,000 kg, maximum load weight: 39,895 kg, overall weight: 54,895 kg, axle configuration: 3 axles, first registration: 10/1989, loading space length: 13,600 mm, loading space width: 2,750 mm, loading space height: 650 mm, total length: 14,850 mm, total width: 2,750 mm, total height: 3,500 mm, suspension: air, tire size: 8.25R15, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, forced steering, lift and lower function, lashing eyes, two-part loading ramps, hydraulic ramps. Kjdpoi Rqi Sofx Akpodu Superstructure: hydraulically liftable low-bed trailer, hydraulic ramps. The trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR, etc., and has not been used since. It can be widened from 2750 mm to 3250 mm. Loading length in the low-bed = 5850 mm, loading length over axles = 4250 mm, loading height over gooseneck approx.: 1620 mm, over loading area approx.: 650 mm, over axles approx.: 940 mm. 1/3 of the low-bed can be hydraulically raised! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Ersatzmesser für Schneidmaschinen - Spare Knife for GuillotinesPolar - Wohlenberg - Perfecta - Schneider Senator 72 - 80 - 92 - 115 - 137 - 155 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Kdodpeh Ax Scsfx Akpju Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, load capacity: 500 kg, total height: 200 mm, total width: 600 mm, total length: 800 mm, 20,000 roller dollies, 80 x 60 cm, 500 kg load capacity Used, good condition, see pictures Load capacity: 500 kg Own weight: 7.7 kg Length: 80 cm Width: 60 cm Height: 20 cm 2 fixed and 2 swivel casters Caster diameter 125mm Color: black Material: PP Dimensionally stable and robust Stackable Negotiable price: €12.00 net ex warehouse Selling price: €10.00 net ex warehouse for a minimum purchase of 100 units Selling price: €9.00 net ex warehouse for a full truckload (924 units) Ksdpfjtymgpjx Akpodu Also available: 1500 roller pallets 120 x 80 cm! (Link) Goods are in stock. Transport and assembly possible upon request. Inspection possible by appointment. Further information upon request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description: Are you looking to buy high-quality warehouse racking? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel structures immediately available • 30–50 semi-trailer trucks of merchandise turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance jobs, we offer a complete all-round package: 1. Lump sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full service is provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you came across us because of heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system - we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), Technical parameters Maximum cutting capacity Round 650mm Square 650×800mm Saw blade Saw blade speed 20~80 m/min Saw size 54X1.6 Guides Carbide and bearing blade guides Cleaning Wire brush & flood coolant Tension Hydraulic Motor power Kodpfsullzhsx Akpodu 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

Condition: good (used), V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley -V-belt width: 17 mm -Mounting: Taper bushing Ø 40 x 30 mm (can be changed) -Dimensions: Ø 187 x 44 mm Kjdpfx Aksucaigopjdu -Weight: 5.7 kg

Condition: used, Year of manufacture: 2001 In very good condition Additional images available Kdjdpohc T Irjfx Akpou

Condition: used, Electric motor, three-phase motor -Manufacturer: VEM, electric motor type EAK 80.1/2-FK14 -Power: 0.4 kW -Speed: 2910 rpm -Shaft: Ø 19 mm -Construction: B3 -Number: 3x motor available -Price: per piece -Dimensions: 300/180/H210 mm Kodpfx Akoggcmkepodu -Weight: 9.5 kg/pc.

Condition: good (used), volume flow: 85 m³/h, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, Grundfos TPD pumps are single-stage, tightly connected in-line centrifugal two-head pumps, with mechanical shaft seal and primarily for applications such as heating / cooling / district power. Type: TPD 80-330 / 2 A-F-A-BAQE Technical pump speed: 2930 rpm Nominal flow: 85.6 m³ / h Nominal lifting height: 25.9 m Maximum lifting height: 33 m Actual impeller diameter: 157 mm Materials Pump housing: Cast iron Impeller: Cast iron Material code: A Installation Ambient temperature range: -30 .. 60 ° C Maximum operating pressure: 16 bar Max. Pressure at the specified temperature: 16 bar / 140 ° C Connection size: DN 80 Pressure value for connection: PN 16 Port-to-port length: 440 mm Flange size for motor: FF300 Pump Transported liquid temperature range: 0 .. 120 ° C Density: 998.2 kg / m³ Electrical data Engine: Rated power - P2: 11 kW Mains frequency: 50 Hz Rated voltage: 3 x 380-415D / 660-690Y V Rated current: 12.0-11.8 A Starting current: 660-780% Rated speed: 2930 rpm Kjdjg I Utpepfx Akpjdu Number of poles: 2 Housing classification (IEC 34-5): 55 Powder / Spray Insulation class (IEC 85): F Motor protection PTC Net weight: 303 kg Gross weight: 328 kg Purchase and purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 15/60 rpm -Power: 0.1/0.45 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 410/210/H190 mm Kjdec Uyd Iepfx Akpjdu -Weight: 24 kg

Condition: used, Gear motor, electric motor Kedpfxjdwhuuj Akpodu -Geared motor for: Steinbock LE 15-60 MK IV A-1 electric forklift truck -Connection: 24 volts -Dimensions: 400/300/H160 mm -Weight: 25 kg

Condition: excellent (used), Year of construction: 1999, Technical data: Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back stop Stroke: 200 mm Thrust: 420 mm Kedovrh Rcepfx Akpjdu Crafter Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1 set of AMADA standard tools Condition: The machine is in very good condition You can find more machines on our homepage. The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), Centrifugal pump, acid pump, caustic pump, water pump for groundwater lowering pump Kdodpovvt Nrofx Akpsu -Manufacturer: DIA, centrifugal pump type Z80V-2 -Engine: Bauknecht 4.4 kW -Performance: m³/h -Pipe connection input: Ø 80 mm -Pipe connection output: Ø 95 mm -Number: 2x pump available -Price: per piece -Dimensions: 540/360/H700 mm -Weight: 96 kg

Condition: good (used), Year of construction: 2006, Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger, control cabinet cooler Kdodpfxovw Rzus Akpju -Switch cabinet cooling unit: from vertical lathe Scherer VDZ 80 DS -Type: K0154009 SK23 259603 -Dimensions: 950/215/H400 mm -Weight: 40 kg

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock Kdedpfx Akovxh Iuspeu

Condition: good (used), tool changer for lathe, tool disc turret, turret system, disc turret for lathe Kjdpfx Akjvyg Euopodu -Manufacturer: Sauter, tool changer type 0.5.675.112 from vertical lathe Scherer VDZ 80 DS -Tool turret: Type 0.5.901.012 for max. 12 tools -Servo motor: Siemens type 1FK7063-2AC74-1SB0 -Individual components: see photos -Dimensions: 560/450/H300 mm -Weight: 117 kg

Condition: good (used), saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 525 x 5 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 23 mm Kodpfxevzn T No Akpjdu -Number of teeth: see photo -Weight: 6 kg

Condition: used, heat-shrink tube 4 : 1 (56/16 mm) black 1 m - 10 pieces per packaging unit with glue Kdodpfx Ajvimt Rokpou data sheet please refer to the photo 9 cartons on stock - price per packaging unit -  weight per packaging unit approx. 1.5 kg

Condition: used, Replacement knife for table shears, replacement blades, cutting knives, shear knives -Number: 2x knives available -Angle honed: 90° -Dimensions: 20 x 80 mm -Lengths: 2x 2397 mm -Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm -Threaded hole -Price: complete Kjdpfx Aocn Shqskpsdu -Weight: 56 kg

Condition: used, Electric motor, luminous flux motor -Power: 1.1 kW -Speed: 2820 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 33 Kdedsct Eq Sopfx Akpeu -Dimensions: 340/160/H220 mm -Weight: 15 kg

Condition: used, Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1350 rpm -Shaft: Ø 19 mm Kdedpfect Eraox Akpju -Construction: B5 -Protection class: IP44/55 -Dimensions: 360/160/H215 mm -Weight: 15 kg

Condition: good (used), Link pipe cutter, pipe cutter -cutting pipe diameters: 80 - 200 mm -The number of links allows the device to be adjusted to the desired pipe diameter. -steel cutting wheel -Ideal for working in trenches -Transport case Ksdpfxeb A Rgzs Akpsdu -Weight: 11 kg

Condition: used, Electric motor, three-phase motor Kdedpfx Aec I Iw Iskpou -Power: 1.1 kW -Speed: 2800 rpm -Shaft: Ø 19 mm -Design: B3 / B14 -Protection class: IP 44 -Dimensions: 270/160/H195 mm -Weight: 10.9 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 5.5 kW (7.48 HP), pressing force: 80 t, stroke length: 150 mm, total length: 3,180 mm, total width: 1,250 mm, total height: 2,450 mm, overall weight: 6,000 kg, Equipment: documentation/manual, Accessories: 3 x bending prism, 3 x top beam, several bending segments, backstop, stroke counter, manual night operation. Technical parameters: Rated force 800 kN, Working table length 2500 mm, Table width 160 mm, Ram speed: downward 50 mm/s, pressing 10 mm/s, upward 100 mm/s, Maximum ram stroke Z 150 mm, Distance between side frames B 2050 mm, Overhang A 250 mm, Maximum opening height H 380 mm, Parallel ram stroke accuracy 0.1/1000 mm, Working fluid pressure 24 MPa, Electric motor power: main 5.5 kW, Machine dimensions: length (with cabinet) 3180 mm, width 1250 mm, height 2450 mm, Machine weight 6000 kg. The machine can be tested in our warehouse in Přerov by arrangement. Kdodpfx Akezzffrspou