Used Akbend Section Bender for sale (3,107)

Condition: new, Year of construction: 2026, tubebender-mandrelbender Zopf 32 H with small digital for programming mandrel length 3000 mm bending capacity round tube up to 32 x 2,0 mm mild steel Kodpofh Nz Tsfx Afksna maximum bending radius 275 mm minimum bending radius 36 mm maximum bending angle 180 degrees motor 2,2 KW main motor hydraulic motor 1,5 KW hydraulic clamping of tube weight 400 kg 400 volt 50 Hz 3 ph.

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Kedokvm S Nepfx Afksna Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending Kjdskvm Szjpfx Afkena 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2018, condition: good (used), Make: FACCIN Knedpfx Askvm Nfsfkoa Type: 4HEL 3590 Control: Siemens TOUCH Year: 2018 Specifications Metric US Standard Rolling width 3500 mm Rolling thickness 3x toproll Ø 80 mm Rolling thickness 5x toproll Ø 110 mm Rolling thickness prebending 90 mm Top Roll Ø 900 mm Top Roll Ø 900 mm Bottom Roll Ø 800 mm Side roll Ø 600 mm Number of rolls 4 Rolling speed 0-6 Adjustiment lower roll 0-200 mm/min. Adjustment side rolls 0-400 mm/min. Top support yes Side supports yes Number of driven rolls 2 Power 90+75+9 kW Dimensions (Estimate) Length 4430 mm Width 8800 mm Height 11000 mm Weight 178000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Knodpfoy Expuex Afkoa Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Ksdpfskwcc Njx Afkjna Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: new, Capacity, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radius difference ----- 50/230 Bending speed/repeatability ----- 230º/s, ±0.05° Mandrel length ----- 1,000–∞ Weight ----- 5,000 kg Machine dimensions ----- 3.0 x 1.6 x 1.5 Tube rotation ----- 0–360°/sec Length feeding ----- 0–1800 mm/sec Degree of tolerance ----- 0.05°/mm Standard components comply with VDMA, ISO, and DIN standards OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with freely programmable robot or loading arm * Weld seam detector and tube positioner (electromagnetic or optical detection) * Free radius bending * Simulation/Collision Control Kjdpfega T E Ajx Afkena * Bed length extension

Condition: new, Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s, ±0.05° Tube length ----- 1,350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0–850°/sec Length feeding ----- Standard: 0–2,400 mm/sec Booster ----- 0–1,200 mm/sec Degree of tolerance ----- 0.05°/mm Bending head rotation ----- 0.75 sec Standard components comply with VDMA, ISO, and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with freely programmable robot or loading arm * Weld seam detector and tube positioner with electromagnetic or optical detection Ksdpfx Ajga T Exofksna * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 130 mm, pressing force: 12 t, bending force (max.): 12 t, Stierli bender 120HE horizontal press Horizontal bending machine, manual control with angle fine adjustment. Ksdpfx Aoflc R Djfkena Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 12 tons tool height 130 mm Stroke 0-170 mm stepless Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: used, functionality: fully functional, Equipment: foot remote control, We are selling a well-maintained profile steel shear/punching machine, Peddinghaus Type 210 AD/13, from our workshop. Integrated functions: Hole punch Bar steel shear Profile steel shear Flat steel shear Notching device Kodpjziz Ewofx Afksna The machine thus combines several processing steps in a compact unit and is ideally suited for flexible use in steel and metal construction. Condition: The Peddinghaus is in perfect working order and is ready for immediate use. Accessories: Various tools included Foot pedal available Important note: Due to the machine's high weight, shipping is unfortunately very difficult or only possible with significant logistical effort. We therefore recommend picking it up. Inspection: The machine can be inspected on-site at any time and tested during a trial run – this way, you can convince yourself of its functionality. We are available to answer any questions and provide further details.

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Revamping year: 2025 Original manufacturing year: 2005 Wire diameter: - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Working pressure: 7 bar Knedsvtp Rmspfx Afkea Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm

Condition: used, This listing is for a Raymond A Lamb E65 paraffin section floating out bath. The Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides Black interior provides high contrast for viewing samples Temperature range: Ambient to 65°C Analogue control of temperature Heater and overheat lights 22cm Diameter of bowl Dims 33cm (D) x 28cm (W) x 14cm (H) Listing: Raymond A Lamb E65 Paraffin Section Floating Out Bath Knodpfx Afoxzhtrjkja

Condition: used, Year of construction: 2009, gebraucht 2009 9725 prompt, Zwischenverkauf v Spanien 14700 € 1 110 to 300 mm Kodpfx Afswiq D Ejkena 5 2 40x20 (28x28) mm 80 mm 17 1/min 600x15 (400x20) mm 605 mm 152x152x13 mm 50/50 mm 90x52x13 mm 5 kW 2130 mm 1200 mm 2200 mm 2500 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, Year of construction: 2008, Working length : 6200 mm Bending capacity steel 400 N/mm² : 1,50 mm stainless steel 600 N/mm² : 1,25 mm alu 190 N/mm² : 2,00 mm Stands + Tension Arms : 7 pcs. Driven linkage joints : 7 pcs. Insertion depth : 1130 mm Knedpfx Afjx Hzdwoksa incl. BMS-Multi-Touch Control incl. electric cutter Directly from the manufacturer. Made in Germay

Condition: good (used), functionality: fully functional, The Vibratome 3000, is used to process tissue specimens into thin slices. It consists of an advancing, vibrating blade to section tissue. The blade amplitude and cutting speed is fully adjustable as is the angle and cut thickness. Knodpfowgc Tysx Afksa The Vibratome 3000 Sectioning System is a specialized medical and lab equipment used in the healthcare, lab, and dental industries. This device is designed to accurately and efficiently section a variety of materials, making it a valuable tool for researchers, professionals, and students in the field. With its precise cutting capabilities, the Vibratome 3000 Sectioning System ensures clean and consistent results, making it a reliable tool for a range of applications. Good working condition. Please check out our other listings as well.

Condition: excellent (used), functionality: fully functional, Profile steel cutting machine, Peddinghaus Peddiworker Manufacturer: Peddinghaus Model: Knsdpfx Aozhhctefkja

Condition: used, Year of construction: 1978, serial number 4412956673057 95 to. ca. engine output 7,5 kW weight of the machine ca. ca 5 t Ksdpsy Hl Rbefx Afkjna dimensions of the machine ca. 2,2 × 1,0 × 2,3 m Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN)

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: BB 60, Tube Bender BB 60 - model BB 60 - capacity up to 60 x 3,6 mm (mild steel) round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 1 - 3 rpm - stepless speed - motor 3 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded Kjdpfx Afsd Eywyekona - monoblock body CK 45 - weight 400 kg - 400 volt 50 Hz 3 ph.

Year of construction: 2026, condition: new, flat iron bender model BRT 100 Kodpfsfmy Ahsx Afkena Zopf

Condition: new, Year of construction: 2026, Angle Bar Bender manual Model 100 E German quality Capacity cold (St 37): steel up to 100x6 mm solid round 18 mm with length stop with 2 Radius-toolings Knedsfhdfvepfx Afkoa weight around 27 kg

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ksdpeyb Hu Nsfx Afkena Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Entry-level model panel bender bending center Ksdpoy H Huhefx Afkona For detailed information and a personalized quote, please send us your inquiry. We will process it as quickly as possible and get in touch with you.

Condition: new, Year of construction: 2026, tube bender R2 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by Kedpfxjdkxkxo Afkjna means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 400 V 50 Hz 3 ph. - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 60 mm - max. Bending angle of 210 °

Condition: used, Year of construction: 2003, Technical details: Knjdpfx Asybbz Refkoa round bar steel: 45 mm square edge steel: 45 mm L-beam: 130x130x13 90 mm flat steel: 450x15 mm hole punching press: 80 ton throat: 300 mm stroke: 70 mm work height max.: 1195 mm total power requirement: 11 kW dimensions of the machine ca.: 2000x1800x2100 mm weight of the machine ca.: 2700 kg

Condition: refurbished (used), Year of construction: 2005, We have a Buhrs ITM CS400 servo gathreing section available. Is your current machine to short? With this gathering section you will get 6 stations extra directly. Year of built 2005 but not used that often. We do selll this gahering section after complete maintenance and with maintained feeder. You have the choice between rotary and fiction feeders which you can place on the base. Kjdpfxeq T Nvco Afksna