Used Winyard Engineering Ltd Mini Fill Depositor for sale (24,795)

Year of construction: 2023, condition: as good as new (ex-display), Technical data: Inlet width mm. 650 Chopping height mm. 300 Output approx. 70 - 80 srm/h wood chips Chipping length approx. mm. 25 to 30 Infeed rollers piece 4 Rotor flight circle mm. 800 Chipping knife piece 2 counter knife piece 1 Feed motors kW 2x4,0 with cardan shaft weight approx. 7.000 Kg. infeed : horizontal Machine base : steel, gas-shielded welded Rotor : steel, inert gas welded, dynamically balanced. Bearing : Oversized roller bearings. Bearing housing : steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Hydraulic system consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for Redpfx Afoncd Dusnet lifting of the upper feed roller. Feeding by 2 gear motors, direct engagement, NORD GEAR.

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Rjdoncd Azjpfx Afnjt Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PCM 200, total length: 1,650 mm, total width: 800 mm, total height: 1,900 mm, warranty duration: 12 months, type of input current: three-phase, power: 225 kW (305.91 HP), Hot air Pork crackling machine Here is the introduction of our pork crackling machine, as follows: Our pork crackling machine is produced from high quality AISI 304 stainless steel. The machine consists of stainless steel body, including inner drum with holes, which allow moderate distribution of hot air and even baking of the product. The operator may choose the time and frequency of the drum rotation with the help of the Frequency regulator and the German company Aditec control. The drum rotation can be according to the product types and time frequency control of the motor speed. The machine is wrapped with insulation, which fully ensure the safety of the operation of the workers, prevent burns. Our Pork crackling machine save manpower, reduce production cost, has easy paddle discharge system, perfect heating system, reliable electric control system, etc. This pork crackling machine is a new type of energy-saving equipment that our company has developed for the characteristics of this type of the products. Redpfxjy Ex Eio Afnet This is our pork crackling machine introduction, if you want to know more information about the pork crackling machine, feel free to contact with me.

Condition: new, Year of construction: 2023, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 540 mm, workpiece weight (max.): 6 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, spindle speed (max.): 12,000 rpm, table load: 500 kg, YCM vertical machining center model NXV-1020A Fanuc control MXP-300FB+ Rjdpfx Asrfdckjfnst Screen size 15" 12,000 revolutions 30 tools 20 bar internal cooling Hinged belt chip conveyor Spindle oil cooler Oil separator Steep taper 40 - DIN-69871A or BBT-40 Machine-side cable preparation for 4th axis connection Demonstration machine at a special price Sale only possible in Germany and Austria

Condition: good (used), operating hours: 129 h, functionality: fully functional, fuel type: diesel, output current: 304 A, output voltage: 380 V, output frequency: 50 Hz, Emergency power system M94, Engine GEC Diesels Ltd, Doman Diesels, Stafford, England, Engine Type 6LET2 Rjdpfx Afou Rb Trenot Generator Newton Derby LTD. Derby England, Documentation and spare parts available.

Condition: good (used), Used pressure vessel with insulation on castors Item number: 10779 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Rsdpfxjrl Rrtj Afnot Operating pressure according to type plate: 0.5 bar Operating pressure sheath: 1.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 400mm Outer diameter: 830mm Height of rollers: 880mm Total height: 1720mm Total width: 1090mm Total length: 1090mm Materials Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Equipment: Type plate: Yes Spout diameter: 25mm Distance drain to floor: 390mm Empty weight: 184Kg Rolling frame prepared for agitator

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. Rjdpfxju Nfhdo Afnot *

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough Redpju Ibu Rjfx Afnst *

Condition: excellent (used), Year of construction: 1978, operating hours: 60,000 h, functionality: fully functional, This listing offers a Kim Ho Sheng Industrial Co Ltd rubber and plastic open mixing mill, model ROLL 16x42'' L, manufactured in 1978. The machine features two large metal rollers designed for mixing rubber and plastic materials. It is equipped with a substantial exhaust hood and duct system positioned above the rollers to provide ventilation during operation. Control handles are located on both sides of the machine, allowing for manual adjustments and operation. This mixing mill is suitable for industrial rubber and plastic processing applications where open mixing mills are required. Redpfx Aeyqyb Ujfnot

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C Rjdpfx Afjcmr D Hjnjt external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: ready for operation (used), There are two pipe pasteurisers available, including storage tank, capacity: 7000l. Redsgi Nxaopfx Afnet

Year of construction: 2018, condition: ready for operation (used), Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. Rsdpfjihp Ipox Afnst

Year of construction: 2008, condition: ready for operation (used), Produces light sources in the form of tubes, product dimensions: 2-4x100-1200mm, including coating, cleaning, sealing, high vacuum station, labelling station and Compressor ALMIG LENTO 15. Rodpog Tvy Dofx Afnjt

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm Redpjclupdefx Afnst height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Condition: good (used), Used agitator tank with insulation on castors Electric heating does not work! Item number: 10784 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: +0.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 410mm Inner diameter: 700mm Outer diameter: 800mm Height of the feet: 870mm Redpfxsrl Rtus Afnot Total height: 1700mm Total width: 870mm Total length: 950mm Cylindrical height: 650mm Materials: Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Type plate: Yes Outlet diameter: DN25 Distance drain to floor: 365mm Propeller agitator Empty weight: 184Kg

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 6,000 mm, fuel type: electric, HT-30 Electric Forklift with Clamp — 3.5T / 6m Lifting Height The HT-30 is a robust, high-performance electric forklift engineered for demanding warehouse and industrial environments where precision high-level lifting is required. Its construction features a rigid 120 mm H-section steel mast, providing outstanding stability and long-term durability in any operating condition. Key Specifications: - Lifting capacity: 3,500 kg - Three-stage mast with a lifting height of 6 metres - Fork length: 1,220 mm - Integrated carrying clamp Powertrain & Drivetrain: - 10 kW AC lifting motor - 7.5 kW AC drive motor - Highly wear-resistant solid tyres for extended service life Redoyymkispfx Afnjt Safety & Comfort Features: - LED work lights, left/right turn indicators, brake lights, and driving lights - LCD instrument panel - Electric horn - Operator seat belt The three-stage mast and 6-metre lift make this forklift ideal for high-bay storage applications. The AC drive system ensures minimal maintenance, regenerative braking, and smooth, precise load handling. The integrated carrying clamp increases versatility for handling non-palletised goods such as rolls, drums, or bales. Condition: New Availability: In stock

Condition: new, Roller diameter: 140 mm Roller width: 50 mm Bore diameter: 35 mm Rjdeyucu Sepfx Afnot Keyway: 10 mm Price per piece: 52 EUR

Condition: new, Roller diameter: 140 mm Roller width: 50 mm Bore diameter: 35 mm Keyway: 10 mm Rjdpfsyucufex Afnet Price per piece: 37 EUR

Condition: new, We offer feed rollers in our range. The rollers are new. Price per piece: 20 EUR. Rodpfsyuctujx Afnjt

Condition: new, Technical data: Number of spindles: 23 Max. workpiece size: 885 x 3000 mm Distance between first and last drill: 704 mm Distance between the centres of each spindle: 32 mm Max. drilling depth: 65 mm Number of pneumatic clamps: 2 Rodpfeyub D Ssx Afnot Operating pressure: 6 - 7 bar Motor power: 1.5 kW Air consumption: 10 l/cycle

Condition: used, functionality: fully functional, For sale: Accessory set for excavator by RSL Engineering for vehicle dismantling – pincer (clamp) with rotator, including arm and adjustable width mounting system, as well as strippers for wiring harnesses, alternators and starters, vertical and horizontal blades. Rodpfxjxzrw Ie Afnot Includes hydraulic hoses. All fully functional.

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Rodpjpu A D Aofx Afnst Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: good (used), Year of construction: 2010, functionality: fully functional, Mixer tank with blender, YIT Industrial and Network Services Ltd 2010. 3000L, stainless steel. ABB motor and SULZER gearbox. Siemens 7ML5221-1AA1, SITRANS Probe LU ultrasonic level transmitter monitors level and volume in liquids and slurries. Sprinkler washing system. Drain outlet at the bottom and a tap on the side. Condition like new with minimal usage. Estimated motor hours: under 100h. Has been used for clay and glaze. Second tank in main picture included in the price, tank only – no motor, etc. Rjdpoylpxfefx Afnst

Condition: like new (used), Year of construction: 1989, functionality: fully functional, T. Giusti & Son Ltd s/s double jacketed mixing tank with steam boiler, serial number: J10717, capacity: 500 liter, dimensions tank: Ø 1100 mm x 2600 mm, dimensions steam boiler: 800 mm x 620 mm x 1800 mm, with switch cabinet, Rsdpfsxrnuwjx Afnot

Condition: new, Technical data: Number of spindles: 42 (21 + 21) Spindle pitch: 32 mm Total spindle width in head: 640 mm Working table height: 860 mm Working table dimensions: 885 x 349.5 mm Motor: 2 x 1.5 kW/2 HP Motor speed: 2800 rpm Operating pressure: 6/8 bar Rjdeya Dfvepfx Afnot Air consumption: 10 liters per cycle Extraction nozzle diameter: 80 mm Power supply: 380 V Overall dimensions: Width: 1070 mm Depth: 1035 mm Height: 1505 mm Net weight: 366 kg