Used Treif Divider Orbital+ for sale (1,490)

Condition: new, diameter 200 mm height 105 mm weight of the machine ca. 25 kg Fjdshuxbrepfx Aivjpn dimensions of the machine ca. 400 x 280x 150 m

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities Fedpjfg E Hpjfx Aivopn become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement Fpsdex Eb Abspfx Aivsn If you have any questions or comments, please let us know. Best regards, Leo Holland

Year of construction: 2014, condition: used, This listing is for 1 of 2 Thermo Scientific ORBITOR RS Microplate Handler The unit is in full working condition and ready for immediate use This robotic microplate handler is a versatile arm designed to provide accurate and consistent automated movements for laboratory workflows. Manufactured by Thermo Scientific, this reliable collaborative robot is an excellent addition to any modern high-throughput screening facility. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: Fjdpfxezqf I Es Aivjpn This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. 2015 Cedrex Fluid X xsd-48 Pro Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), FANUC 21-M Control With NC dividing head Fpodpfx Aoy Hqyhoivjn Working travels 1020 x 510 x 575 mm Table size 1200 x 550 mm Spindle taper SK40 Spindle speeds 60-8'000 rpm Tool changer 24 Pos. Coolant through spindle Misc. accessories MARCELS MASCHINEN CH

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 66,000 mm, loading space width: 24,800 mm, loading space height: 10,000 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/Multimedia system - Rear view camera - Disc brakes - Sleeper cab - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 6-026 IMMEDIATELY AVAILABLE -> Model and year of manufacture 2026 MAN TGX 26.480 6x2-4 Air / Air as a dump truck with loading crane PALFINGER PK 22002 EH or FASSI F235, each with 4 or 6 outriggers Fsdpfx Aez Hkdnsivopn Vehicle: Diesel engine MAN D26, 480 hp, Euro 6e Automatic transmission MAN TipMatic 12.26 DD with retarder 35 Retarder Eco, speed-dependent, adjustable, energy-efficient High-performance engine brake MAN EVBec, adjustable Disc brakes, protected, for off-road use Drive 6x2-4 Suspension type Air / Air (LL) 4,800 mm main wheelbase, 1,350 mm wheelbase between rear axle and trailing axle 590 l fuel tank capacity, 60 l AdBlue tank capacity Trailing axle steered and liftable Trailer coupling RINGFEDER Type 4040/G150B, ø 40 mm drawbar pin -> Optional ø 50mm also possible Cab GM: the spacious one (wide, long, medium height) Comfort mattress, lower, 110 mm Pull-out refrigerator and drawer Driver's comfort seat, air-suspended, with lumbar support and shoulder adjustment Glass sunroof, electric LED lighting MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced with subwoofer GSR equipment (rear view camera, turning assistant, tire pressure monitoring, Alco Lock preparation, etc.) Body: Dump bed: Dimensions 6,600 x 2,480 x 1,000 mm Side walls 1x divided (2 flaps) per side, with side wall release Substructure: Steel construction, KTL + powder coating and/or hot-dip galvanized Perforated frame for good load securing Center lashing bar Toolbox Support leg pads including bracket Cranes: Fassi F235 loading crane: Load capacity at 12.7 m still 1,345 kg or 17.1 m at 740 kg Slewing range 400° Double knuckle system with PROLINK (over-extension of the knuckle arm up to 15°) Electronic overload cut-off system with FX500 Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) Emergency stop, as well as optical alarm (90% and 100%) incl. digital slewing limit adjustable FASSI stability control FSC incl. LMB II Control system for 2 additional functions with »2 hose guides / e-dynamic With 4-section and 6-section extension on stock alternatively: PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE -Lifting moment: 205.0 kNm (20.9 mt) -Classification HC1 HD4/B3 according to EN12999 -Fast extension system with oil return and internal oil passage -Double knuckle with Power Link Plus 15° -Slewing mechanism with slewing cylinders -Slewing range 400° -Electronic HPLS -...

Condition: used, maximum load weight: 28,340 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2014, next inspection (TÜV): 10/2028, Year of construction: 2014, Internal vehicle number: VTC30057 Fsdpfszfuqrjx Aivspn Available immediately More information at: Luis Lucena Viktoria Sologubova Berger SAPL 24 SATA tank semi-trailer – 35 m³ – 4 compartments – 3 axles Used Berger ecotrail tank semi-trailer, type SAPL 24 SATA, manufactured in 2014. According to the seller, the three-axle semi-trailer has a total capacity of 35 m³, divided into four compartments. With a permissible gross weight of 35,000 kg and an unladen weight of 6,660 kg, the payload is 28,340 kg. Technical data: * Vehicle number: VTC30057 * Vehicle condition: Used * Category: Tank semi-trailer * Manufacturer: Berger Fahrzeugtechnik * Product line: Berger ecotrail * Type: SAPL 24 SATA * First registration: 10/2014 * Year of manufacture: 2014 * Axles: 3 * Permissible gross weight: 35,000 kg * Unladen weight: 6,660 kg * Payload: 28,340 kg * Tank volume approx.: 35 m³ * Number of compartments: 4 Data according to manufacturer's identification plate: * Manufacturer: Berger Fahrzeugtechnik Ges.m.b.H. * Country of manufacture: Austria * Vehicle identification number: VA9USLAKTDFZT0437 * EC type-approval number: e42007/460339*02 * Technically stated total mass: 39,000 kg * Permissible fifth-wheel load: 11,000 kg * Technically stated fifth-wheel load: 12,000 kg * Permissible axle load: 3 × 8,000 kg * Technically stated axle load: 3 × 9,000 kg Inspection and functional testing are possible by prior arrangement. Further information, photos and videos are available upon request. Subject to errors, changes and prior sale. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Fodsz Ht Ebopfx Aivopn Usage: Frozen Block cutter for butter and similar products Electrics: 3~ / 400 v/50hz Air: 6 bar -8bar

Condition: new, 8 St. range L-W-H 880 x 580 x 1000 mm weight 156 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long Fjdpou Imf Iofx Aivjpn 32x short dividers 1x stacking tray

Condition: good (used), Year of construction: 2010, functionality: fully functional, Well-maintained and lightly used Gabbiani/SCM Galaxy 105 horizontal panel dividing saw. Year of manufacture: 2010 Cutting width: 4,500 mm Fence depth: 4,100 mm Cutting height: 105 mm Saw blade: 380 mm The machine can be inspected while powered on. Fpsdjz Evm Sjpfx Aivjn

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,900 kg, empty load weight: 2,100 kg, loading space volume: 12 m³, loading space width: 2,400 mm, loading space length: 6,500 mm, loading space height: 800 mm, first registration: 01/2026, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel construction, flap, lashing eyes, swing-out flap. Construction: Roll-off container with folding side walls and swing-out flap, approx. 12.5 m³, archive photos of roll-off container, roll-off flatbed: approx. 12.5 m³, with side walls and swing-out flap that can be driven over, with spring relief. Spring relief for the side walls and flap. Manufactured according to DIN 30722-1. Fjdez Ng Tfopfx Aivopn Internal dimensions: 6500x2400x800mm. Floor: 5mm - S235, wall: 3 mm - S235. Frame: INP 180. Floor / side wall 90 degrees. Side wall 800mm, divided in the middle with spring relief, removable stakes!! Front wall 1700mm high!! Last spars: C-profile 160mm. 8 x lashing eyes recessed in the floor (4 per side). Rollers: Length 300 mm, diameter 159 mm + greaseable hinges. Ladder screwed onto the front wall. Net hooks. Hooks: Ø 50 made of steel S355 | height: 1570 mm. Container inspected and approved according to DGUV 114-110. Surface / paint: Primed: Inside, outside, each 80 µm. Painted outside, RAL color: 40 µm. Color: RAL 7016 - hydrodynamic method. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), Direct from factory we have a Koenig bread system. This factory mainly manufactured pies so only had bread machinery as a sideline. Low running hours. inspection is welcomed near Cambridge, UK. Please note the photos show the machine before it has been cleaned, we have many other Koenig sections available too. Fsdew E D Ivjpfx Aivjpn

Condition: good (used), GEA Aquarius CX360 bagging machine direct from salad packing line. Nice condition. Fpjdpfxswztmte Aivsn

Condition: as good as new (ex-display), Loma IQ3 retail spec metal detector in as brand new condition. Bought for a project which was cancelled. Fjdpfx Ajvaawkeivspn

Condition: good (used), PA Eclipse SL6 high throughput tray sealer from ready meals factory. Fpsdpfx Aiopg Er Novsn

Condition: good (used), JBT M6 6 fryer. electrically heated fryer, 600 mm wide with 6 m frying length. Machine in lovely condition with auto canopy lift, top hold down belt and Teflon infeed. Rare opportunity. Fpedpfxet Dxwts Aiven

Condition: new, Year of construction: 2026, Equipment: all wheel drive, soot filter, * Bobcat L85 * Cabin with heater!!! * Air conditioning!!! * Ride Control (vibration damping) * Wide tires, 405 series Fpedpfx Aisz N E S Tsven * Standard bucket * Pallet forks available at an extra charge! * LED work lights * Road lighting!!! * Rearview camera!!! * Auxiliary hydraulics * Electrical system for attachments * 20 km/h version * New UVV inspection!!! * "Trade-in of your used machine is possible" * All available Bobcat attachments can be supplied!!! * The information provided online is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for errors, input errors and data transmission errors / subject to change. Financing / leasing / hire purchase possible!

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Fjdpjz Irfvsfx Aivjpn Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Year of construction: 2026, operating hours: 36 h, condition: used, functionality: fully functional, Product weight 2-500g, power220V/1P/50HZ, 0.6KW, Speed50-150pcs/min, machinesize: L1240*W535*H1130mm, SUS304,Weight 95kg The equipment can accurately divide the dough/pastry into evenly sized small dosages, which is suitable for the productionof variouspasta, and the divided dosage will be automatically beaten into the required shape, which has high production speed and high production efficiency. Hopper Material: 304 stainless steel 1. Food standard Fpsdszx D Dbopfx Aivsn 2. The hopper is suitable for many kinds of fillings like dry filling, scattered filling and other fillings with poor liquidity. It is more anti-corrosion and stable. Enjoy a long life. Cutter and safety cover Features: 1. Easy to take apart and control product length. 2. Does not stick dough. 3. All the material which can touch food we also use healthy materials. 4. Can make different shapes by changing nozzles. 5. High-quality nozzle material. Used, in good condition, still under 1-year warranty from the manufacturer. Selling due to the factory closure. More videos & photos on request.

Condition: like new (used), Year of construction: 2021, Almost brand new condition. Bought in 2021 and only used for a few months before factory Bankruptcy. Great saving on new price. Fsdpfx Ajx Hazusivspn

Condition: good (used), Year of construction: 2003, functionality: fully functional, controller model: Basis Bosch Typ 3, Standard equipment: Machine - Working area 2500 x 1250 mm - Rotatable tool holder - Automatic repositioning with clamping device - Automatic tool changer with 19 stations - 2 clamping jaws - Programmable clamping device with pre-selectable - Clamping force - Dividing slide 200x200 mm - Part sorting into 2 containers - 2 good part containers Fodpfx Aoz Rl Iweivopn - Ball tables - Tool spray lubrication - Punch scrap extraction - Scrap container - Quick shut-off for hydraulics - 10.4" TFT color screen - 3.5" floppy disk drive - Graphics programming ToPs 2000 - ToPs 2000 - Software package for PC (CD-ROM) - Safety light curtain, 2-beam - RJ45 network connection - Network connection including installation Extended machine equipment - Multitool function - Thread forming function - Marking/fast beading function - Roller tool function - Vibration-damped installation Automation - Loading and unloading device - Extended pull-out for raw material trolley - and unloading platform - Manually movable raw material trolleys - Scrap extraction system - Stop system with spread magnet - Sheet metal thickness gauge - Suction frame for loading - Gripper for unloading

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control Fpedpfx Aisz Rl Hyevjn - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Saddle compartment, leaf spring suspension, door/ramp combination Equipment: - Aluminum walls - Aluminum floor - Ramp/door combination Net: €11,756.30 / Gross: €13,990.00 Article number: IBX626110111.01 Technical data: • Brand: Ifor Williams • Model: HBX 506 • Vehicle type: Horse trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 326 x 167 x 229 cm • Exterior dimensions (L x W x H): 430 x 214 x 275 cm • Loading height of the floor: 38 cm • Permissible total weight: 2,600 kg • Tare weight: 880 kg • Payload: 1,720 kg • Chassis: Low loader (wheels next to the body) • Tires: 165R13C • Suspension: KNOTT leaf spring suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Suspension with leaf springs for high driving comfort • Large XL saddle compartment with: adjustable saddle holder, bridle holder, storage compartments • Aluminum floor • Aluminum walls • Tie-down option outside Fpodpfsx S Ri Hox Aivjn • Tie-down option inside • Divided box bars with plastic protection • Center post partition, can be swivelled and removed at the front and rear • Side padding on the walls and on the center partition • Awning rail • Height adjustment for box bars • Depth adjustment for box bars • Panic release • Extra padding on breast and rear bars • Entry door on the right side, lockable • Door stop on the entry door • Single wheel mudguards, plastic (black) • 12mm thick rubber mat loose on the floor • Hay net rings • Kick protection on side walls (GFK plastic) • Doors above the rear ramp with panic release - can also remain open while driving • Towing handles • Front window/top doors can be opened on both sides (ventilation and swivel) incl. protective grille from the inside • Roof hatch • Lifting device, gas pressure shock absorber on the rear door • Ramp & door combination on the rear door • Step on the rear door • Lockable cast iron ball coupling • LED interior lighting • Spare wheel with bracket mounted • Lighting system with reversing light • 3rd brake light at the rear • 13-pin plug _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transport license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosoling System Application: This combination of padding and drying unit has proven to be highly effective in practice. It is used in this form for a variety of hot air treatment processes, such as drying, fixing, condensing, thermosoling, etc. The system is used wherever a specific sample size is required, for example, for the production of sample collections or similar applications. Drying Unit THN If all of the aforementioned applications are to be guaranteed, and the use of needle frames is also desired during individual operation of the drying unit, the THN model is preferred. The standard needle frames are suitable for a sample size of max. 50 x 50 cm (larger needle frames are available upon request). If all of the above applications are to be guaranteed and the use of needle frames is also desired for stand-alone operation of the drying unit, the THN model is preferred. The standard needle frames are suitable for samples up to a size of 50 x 50 cm (larger needle frames are available upon request). Length-adjustable frames for fabrics or length and width-adjustable material holders for knitted fabrics, meshes, non-woven fabrics, etc., as well as clamping frames for foils and paper, are available. Drying Chamber The drying chamber with electrical distribution box and control panel is mounted and screwed onto a base frame. A double-walled construction with insulation in between ensures good thermal insulation of the drying unit. The 1300 mm long nozzle arrangement is divided into an upper and a lower nozzle chamber. A control flap allows the ventilation to be evenly regulated from above and below, or the air flow to be regulated from above or below. Fan and Heater A powerful fan with a capacity of approximately 900–3500 m³/h, in combination with an optimally matched heating output, ensures intensive air circulation and thus optimal evaporation performance. A double-protected monitoring system reduces maintenance effort and increases the operational safety of the drying unit. The heating output is designed for rapid heating and is automatically reduced after the desired temperature is reached, in order to avoid unnecessary power surges. The temperature is electronically controlled in the range of 20–250 °C. Fresh air is directed directly into the circulating air fan via a fan. The desired air flow can be adjusted via a step switch. Technical Data Air velocity approx. 4–12 m/s Air volume flow approx. 900–3500 m³/h Temperature range up to 250 °C Heating output approx. 27 kW Nozzle cross-section 1300 mm Infinitely adjustable fabric tension Multi-stage adjustable fresh air supply Dimensions (L x W x H): 4800 x 1380 x 1750 mm Fpodpfxsu D Arij Aivsn Purchase price: €86,275 More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. Fodpoz Iww Rjfx Aivspn 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).