Used Three-Jaw Chuck / Power Chuck for sale (41,752)

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Dkjdsx A Imzepfx Aqven Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 Dkodpfsy E T Dgsx Aqvsn - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Suitable for Gildemeister GDM 42 Through-hole cylinder RÖHM SZS 45/92 559 Ident no.: 414096 Serial no.: 7069 Operating pressure: max. 40 bar Speed: max. 7000 rpm Piston diameter: 125 mm Piston rod diameter: 62/53 mm Dkedpfxey E T A Ae Aqvsn Piston stroke: 25 mm Inner diameter of cylinder tube: 45 mm Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic operation of power chucks or collet chucks. Through-hole cylinder for hydraulic actuation of power or collet chucks with a through-bore.

Condition: used, overall weight: 260 kg, Material: steel Diameter: 710 mm Spindle bore: 150 mm Dodpfsyxgf Rex Aqvskn Spindle speed: 400 RPM Weight: 260 kg

Condition: good (used), functionality: fully functional, overall weight: 80 kg, chuck outer diameter: 400 mm, spindle bore: 140 mm, Four-jaw scroll chuck Very good condition, signs of use are visible, see photos Clamping jaws: 4 reversible jaws → external clamping for larger diameters Suitable for: use on lathe; machining center; milling machine Chuck can be mounted on milling table or machining center using a mounting flange. Jaw adjustment via square wrench and scroll plate, concentric adjustment, RÖHM Type Z 400. Jaw dimensions: Width: 34 mm Length: 110 mm Slot B: xx mm Dkedpfx Aqjy Apncsven Slot D: xx mm Total weight: approx. 90 kg Supplied incl. chuck key. Additional clamping jaws available on request. Flange for mounting on milling table available on request. Delivery: Shipping on transport pallet by freight forwarder available on request.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 115090324, KITAGAWA POWER CHUCK e.g. OKUMA, MAZAK, MORI Three-jaw chuck with serration. cylindrical holder for spindle flange Spindle mounting flange in scope of delivery KK6 Dkjdpfx Aji Hqhqeqven Drawtube connection thread M60x2,0mm currently under investigation Jaw interface: 1.5 x 60 ° Weight without clamping jaws approx. 30 kg For further inquiries, we are at your disposal. Shipping costs on request

Condition: used, High-pressure hydraulic power unit up to 630 bar WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader, hydraulic spreading tool Year of manufacture: 1988 / 1986 Hydraulic power unit type E45 / 59600.0 Operating pressure max. 630 bar Flow rate approx. 2 l/min Tank capacity approx. 10 liters Spreader tool - WEBER spreader type SP30 / 59 198.0 Spreader range = arm length 340 mm Spreading distance max. 610 mm Spreading force in working range max. 132 kN Closing force 99 kN - Twin hose with quick-release coupling Rated power 0.9 kW Dedpfx Aqjdzp S Revekn Power supply 220 Volts, 50 Hz Weight hydraulic unit approx. 40 kg Weight spreader approx. 25 kg Very good condition Hydraulic rescue set for fire brigade with hydraulic power unit and spreader. The spreader is used to create rescue openings after road traffic accidents by spreading. Also suitable for compressing or lifting loads. Versatile application thanks to the multifunctional spreading jaws made of drop-forged and hardened steel.

Condition: ready for operation (used), Outer Ø: 125 mm Bore: 32 mm Short taper Camlock size 1-4" Dsdpfx Aqehq Tzgjvjkn

Condition: ready for operation (used), Outer Diameter: 300 mm boring: 90 mm Dodpfxed H I Syo Aqvjkn height: 110 mm weight: approx. 59 kg

Condition: used, Chuck outer Ø: 250 mm Bore: 80 mm Dodpfjdan Aljx Aqvekn Chuck body height: 87 mm incl. outward stepped jaws, chuck key, inward stepped jaws are missing!

Condition: good (used), outer diameter: 315 mm boring: 105 mm Djdpfsckpnfjx Aqvjkn

Condition: used, Outer-Ø: 350 mm inner-Ø (passage): 125 mm Dodpfxjc Snupo Aqvjkn Overall height: 100 mm

Condition: ready for operation (used), Outside Ø: 250 mm Bore: 75 mm Djdped Hygbefx Aqvskn Recess: 15 x 110 mm Ø Height: 140 mm

Condition: used, Chuck outer Ø: 350 mm Dkjdjdaqcfepfx Aqvon Bore: 125 mm Height: 100 mm incl. outward stepped jaws, chuck key, inward stepped jaws are missing!

Condition: used, Outer-Ø: 355 mm Bore: 130 mm Height without flange: 113 mm Height with flange: 150 mm Dkedpsc Snucofx Aqvjn

Condition: excellent (used), Outside Ø: 310 mm Bore: 105 mm Dsdpfx Aqeg Hzaaovjkn Construction height without jaws: 110 mm Jaw height: 45 mm Reversible jaws

Condition: like new (used), functionality: fully functional, chuck outer diameter: 1,250 mm, 4-Jaw Lathe Chuck BISON Ø 1250 mm, A15 Mount – almost new For sale: 4-jaw independent lathe chuck from renowned manufacturer BISON, diameter 1250 mm. Designed for heavy-duty industrial applications, suitable for large conventional and CNC lathes. Technical data: Manufacturer: BISON Dkedpfxsy Exqxs Aqvjn Type: 4-jaw independent chuck Diameter: 1250 mm Mounting: A15 taper Condition: almost new Description: High-quality lathe chuck ensuring precise clamping of large workpieces. Each jaw is independently adjustable – perfect for machining irregular shapes. Available from stock.

Condition: excellent (used), Four-jaw spiral chuck diameter 315 mm chuck height flute 125 mm short taper chuck size 6 taper diameter 106,39 mm pitch circle diameter for stud 133.4 mm 4 stud bolts M 12 Dsdelguy Sopfx Aqvjkn Accessories : 1 chuck key 1 set of hard drilling jaws 1 set of turning jaws hard Weight 103 kg Transport dimension : W800 x D.600 x H.550 mm

Condition: excellent (used), Four-jaw chuck make Röhm diameter 315 mm single adjustable jaws bolt circle 120 mm Djdpfx Aepk A A Heqvokn

Condition: excellent (used), Four-jaw lathe chuck (2859) Make Klopfer diameter 300 mm Short taper size 6 Taper diameter 106.39 Dedjtuvnyopfx Aqvokn Pitch circle diameter for stud 133.4 mm Chuck height 110 mm

Condition: excellent (used), Four-jaw chuck Dkodpfx Aqevx Acyjven Arowa No.8 (28592) Diameter 250 mm Through hole 68 mm Weight 20 kg

Condition: good (used), functionality: fully functional, 315 mm and 250 mm chucks, with central adjustment and individual adjustment of the clamping jaws, Dkodpfx Aqsy Agmveven

Condition: used, 3-jaw wedge bar lathe chuck FORKARDT TYPE F+160 No. 1659 181 Identical to Forkardt, SMW or Röhm Diameter: 160 mm Inner diameter: 45 mm Chuck flange: Short taper DIN 55022 size 6 1 set of chuck jaws consisting of base jaws and hard top step jaws for turning 1 set of chuck jaws consisting of base jaws and soft top step jaws for turning - Central adjustment Dsdpfx Aqjf Axprevjkn Weight: 11 kg good condition

Year of construction: 2010, condition: good (used), Power chucks for vertical and horizontal CNC lathes Manufacturer: SCHUNK Type: ROTA NCO260 year 2010 diameter 260 mm with intermediate flange diameter 220 mm spindle nose in flange DIN 55028 / A6 Thread in tie rod M24 N max: 4500 rpm In good condition. 2.pieces available Price is for 1.piece. Dksdpfxeikzy Ds Aqvjn

Year of construction: 2010, condition: good (used), Power chucks for vertical and horizontal CNC lathes Make:RÖHM Type:KFD 400 Dkedpfx Ajikzzpeqvsn Tie rod M24 Nmax:2000 rpm Good condition .