4 jaw chuck

- -

Condition: used, Year of construction: 2010, operating hours: 1,000 h, functionality: unexamined, machine/vehicle number: -, Large electroplating bath made of polypropylene with steel frame (8 m x 1.5 m x 1.5 m), installation for water heating and (for tripartition) flexible partitions, only used a few times for chemical nickel plating, for sale together with two large PVC tanks (collecting basin for main bath W 3.0 m, L 10.0 m – storage basin for pre-/post-treatment of workpieces to be plated W 1.8 m, L 7.5 m) available for bids. Gtjdpfx Afeyi D A Tensu

Year of construction: 1984, condition: used, gr. grinding Ø: 40 mm small grinding Ø: 5 mm weight: 0,9 t 2 grinding wheels with flange 8 collets Gtedpfx Afjcq Rv Usnju 1 coolant tank mechanical feed with fixed stop The cardan shaft for the workpiece drive is worn out

Condition: used, For powder or liquid d. 1800 Gtodpsx S Ry Esfx Afneu Height on photos Drain diameter 215 mm Flange diameter 340 / 8 holes on d.290 Off-centre conical bottom 4 feet on gussets

Condition: used, Year of construction: 2007, Manufacturer : - Year : 2007 Type: Melter with heating elements - immersion heaters Volume : 35 L Anchor blade stirring with Teflon scrapers Tank lid Variable speed drive: mechanical and manual Jacketed : Yes Immersion heaters: 2 Workshop test temperature: 80°C Godpfox R Dlxex Afnotu Recirculation pump for jacket Electrical cabinet Video available in running condition

Condition: new, Year of construction: 2023, Welding turntable, tank turning device 6000 Kg load capacity Gtodpfx Afok Adl Honsu Didital display with foot remote control diameter from 180mm to 3500 mm drive rollers diameter 300mm dimensions: length 1900mm x width 470mm x height 390mm Speed infinitely variable 200 - 1800 mm / min.

Condition: used, Type : Melter Inside diameter : 40 cm Gtodpfx Afjx R Dflonou Useful height : 38 cm Usable capacity : 45 L Enclosed jacket with immersed heating elements: tank bottom + shell Max. permissible tank temperature: 280°C Pressure: 4 / -1 bar Pneumatic drain valve T°C sensor Thermal regulator Insulation Pressure gauge: air injection.

Condition: used, Type : Stainless steel trolleys for transporting screening grids Gjdpsx R Dffsfx Afnetu Dimensions from left to right :147x75x100 cm165x100x10 cm

Condition: new, weight max. 10 t workpiece diameter 100 - 3200 mm Gedpfx Ajf Ep Dijfnotu drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW

Condition: used, Type : vessel / container Material: stainless steel Useful volume: 750L Height of tank: 127 cm Tank diameter: 87 cm Godpfx Asx R Ddhefnjtu

Condition: used, Type : Stainless steel mobile container / hooper Gedox R Dbaspfx Afnstu Quantities available : 2 Dimensions : 110 x 110 x 90 cm (wheels included)

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm arm length 1700 mm Gtodet Hw Uvepfx Afnou workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Type : Dynamic storage and accumulatio table Dimensions : 250 x 90 x 200 cm Movement : forward - backward for continuous feeding Gtodpex R A Uxefx Afnou Buffer table between two machines. Full plastic casing

Condition: used, Type : Wall-mounted agitator Motor : 0,25 KW Gedpfxsx R A T Uj Afnjtu Total height of stand: 190cm Shaker shaft height: 60cm Supported by counterweight

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Gedetv Iklspfx Afnstu Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: used, Stainless steel bowlFull openingTotal volume: approx. 280 LDiameter: 82 cmDepth: 53 cmLevel sensor: high – low Gsdpfx Afex R A Tzjnjtu