Used Stapler Center Fritz Gmbh Heavy-Duty Trailer for sale (82,191)

Condition: new, Year of construction: 2025, Pressure blasting cabinet DSK 15.15.20.RB75 with or without roller conveyor. Blasting chamber W=1150 D=1150 H=930mm. 1 TÜV-tested pressure vessel 20l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Dust extraction filter 2000m³/h 2,2kW Rsdpfx Afsga I R Esnet

Condition: new, Year of construction: 2025, sandblasting containers allow flexible blasting in closed rooms at any location where it is required. 5,89 x 2,35 x 2,69 m A closed sandblasting grit circulation using an integrated flat conveyor or screw conveyor floor, or via side-mounted recirculation channels, Rjdpfx Aefin Iyjfnjt with optimal preparation of each blasting grit, ensures effective exploitation of the grit.Depending on the container size and required area output, one or more free jet pressure blowers can be used. The blasting nozzles of our tried and tested free jet pressure blowers are manually guided. Our free jet pressure blowers can be fitted with an automatic refilling system to ensure continuous operation without interruption for the blaster.

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 1102 S with carriage and turntable. Width: 1500mm depth: 1235mm height: 995mm Lift door pneumatic. Rsdpfx Afsdhl Ngenet Questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Rsdpfxjdtq Ano Afnst Questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Extraction ground, Waffle floor mineral abrasive about 7000x4200mm without grid East surface with suction and collecting boxes For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts. Rjdpfx Afsdz Ayvenot

Condition: new, Year of construction: 2025, Slingshot wheel type suspension line type 1.15 2T Use Dundy 1000mm Houldn 1500 load 500kg with 2 hours of sling wheels 7.5kW with filter system and suspended dust filter. Rodpfx Afsdrr U Ssnot For questions about technical specifications, etc., please contact us in writing or by phone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert-Georg Fischer-Schiffmann and Seidl-Oliver Fritz GmbH & Co. Kg with the long-time known contacts.

Condition: new, Year of construction: 2025, Blast house components. Flat conveyor floor, cross conveyor screw, bucket elevator, air sifting, sieve, blasting medium hopper, blasting unit, filter system, fan, air ducts, lamella suction wall, blow box, electrical control as a kit without assembly. Alternatively, the plant components can also be assembled by our specialist fitters on your premises. Redpfehc T Nlex Afnet

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 10,000 mm, inner dimension height: 5,000 mm, filter area: 250 m², volume flow: 16 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. Redpfsu Ey Dlex Afnot For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2026, Dump belt blast wheel blast machine 7,5 kW direct driven indexing turbine with 8 throwing blades. Belt width 700mm and Ø600mm Redpfog S Rt Eex Afnet

Condition: ready for operation (used), 20-foot sandblasting rental container with pressure blasting equipment, filter system, and safety equipment Rjdpoxl Dq Uefx Afnjt

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy. Rjdpfxjw Ivqms Afnot

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 20.10.09 with carriage and turntable. width: 2050mm depth: 935mm height: 955mm Pneumatic lifting door with the advantage that the abrasive falls into the cabin when opening the door and not on the floor. Redpfxefnh Rvo Afnjt If you have any questions about technical specifications etc. please contact us in writing or by telephone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the well-known contacts of many years.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm distance between centers: 1000mm spindle size: 50 mm Rjdpfx Afjyh Ndwsnjt chuck size 200mm speed range 40 rpm to 2000 rpm machine weight: 1700kg including 3 jaw chuck and tool holder

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use. Rsdpfjxb Ucasx Afnot

Condition: new, empty load weight: 9,600 kg, Year of construction: 2026, Gas tank semi-trailer for CO2 Carbon dioxide New gas tank semi-trailer for CO2 Carbon dioxide Manufacturer: CRYOBASE GmbH Volume 23 m3 Working pressure 22 bar Rjdpjymza Dofx Afnjt Pump Tare weight 9600 kg First registration: year 2026 We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: used, Year of construction: 2009, Doosan HM1000 Heavy Duty Twin Pallet Horizontal Machine Centre. S/No HM10000080 (11/2009) with Fanuc 31i model A Control, Pallet size 1000mm x 1000mm, Travels X = 2100mm, Y = 1250mm, Z = 1250mm, Big Plus Spindle BT50, Spindle speeds 20 – 6000rpm, RUCKLE Full ‘B’ axis, Max Table load 5000kg (upgrade capacity), ATC Carousel 90 positions, U Axis fitted to Spindle for D-Andrea Heads, Renishaw TS27R Tool Probe, Renishaw RMP 60 Spindle Probe, Qty of BT50 Toolholders (Backend only), Screw Drive Swarf Conveyor, Filtermist, Main Spindle refurbished in 2020, Machine Weight 29,000kgs Rodpfx Aoy Amg Aefnst Location: These lots are located in Dunfermline, Scotland, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Model: D Serial No: 20829 Capacities: Maximum Swing Over Bed: 508mm Maximum Distance Between Centres: 4572mm Wheel Dimensions: 660x 75mm Redpfsyx Hw Tex Afnet Work Head Speeds: (8) 22 – 129rpm Wheel Head Speeds: 735rpm Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 960rpm Work Head: 4HP 1440rpm Table Motor: 3HP 950rpm Complete With: 4 No 2 Point Open Steadies Complete 3 No 2 Point Steadies Incomplete Table Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 13,000 x 2500 x 1800mm Approximate Weight: 19,000kg

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) Redoh U Rzgjpfx Afnjt MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, machine/vehicle number: XL9T0N30004415020, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2005, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2005, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Redpfx Aoymbg Rjfnjt Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 6.370 kg Carrying capacity: 38.630 kg GVW: 45.000 kg Registration number: OJ-20-BV

Condition: used, machine/vehicle number: XL9T0N30074415040, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2007, total length: 13,800 mm, total width: 2,550 mm, suspension: air, wheelbase: 9,110 mm, color: other, Year of construction: 2007, = Additional options and accessories = Rodpex Ihhfefx Afnst - Air Suspension - BPW Axles - Lift Axle = More information = Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Identification Registration number: OJ-34-ZH

Condition: good (used), workpiece weight (max.): 80,000 kg, grinding diameter: 1,580 mm, grinding length: 7,500 mm, Manufacturer: Farrel Type: 60" x 24" Heavy Duty Year of manufacture: 1960 Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Specifications Metric US Standard Center height 930 mm Grinding diameter Ø 1860 mm Grinding length 7500 mm Grinding stone dimensions 1080 x 180 mm Grinding stone speed 400 - 100 rpm Tailstock 260 x 1250 Mk Coolant system Yes filter Yes Dimensions (estimate) length 13200 mm width 4250 mm height 3200 mm weight 80000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Share on download Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanges / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930mm Grinding diameter Ø: 1860mm Grinding length: 7500mm Grinding stone dimensions: 1080 x 180mm Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 13200mm Width: 4250mm Height: 3200mm Weight: 80000kg Rsdpfx Asr Ikvmefnst Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930inch Grinding diameter Ø: 1860inch Grinding length: 7500inch Grinding stone dimensions:1080 x 180inch Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 519.684inch Width: 167.323inch Height: 125.984inch Weight: 176449.6lbs Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill

Condition: used, mileage: 370,777 km, power: 368 kW (500.34 HP), first registration: 04/2017, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, color: green, gearing type: automatic, emission class: euro6, Equipment: air conditioning, MAN 33.500 TGS 6x4 First registration: 04/2017 Rodsy E U Iajpfx Afnjt * Automatic transmission * Unladen weight: 9,725 kg * Wheelbase: 3,250 mm * German registration Inspection possible at any time during our opening hours, test drive by appointment only! For export sales, a deposit will be retained, which will be refunded after receipt of the proof of arrival. Company logos or advertising logos on the vehicles may have been digitally altered on the photos. No guarantee is given for the functionality of the extras. All information provided without warranty - subject to errors, changes, typographical mistakes, and prior sale. Vehicle descriptions do not constitute guaranteed characteristics. Please refer to our Terms and Conditions and make sure you are familiar with them.

Condition: excellent (used), mileage: 534,062 km, power: 537 kW (730.12 HP), first registration: 02/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: semi-automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 7,250 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2020, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, parking heater, power assisted steering, retarder, soot filter, spoiler, traction control, trailer coupling, - Alarm - Aluminum fuel tank - Roof spoiler - High beam - Low noise - Speed limiter - Tipping hydraulics - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Air suspension - Air horn - Particulate filter - Radio/CD - Reversing camera Rsdpfx Afjyx Acfsnjt - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Power take-off (PTO) SCANIA S730 V8 NGS | 8X4 | Heavy-duty 180Tons | 534,062 km | 2020 | Hydraulics | Retarder | Full air suspension | Sliding fifth wheel | King of the road | Leather seats | Heated/cooled seats | Stationary air conditioning | Navigation system | Reversing camera | Refrigerator | Sleeper cab | Air conditioning | ACC | Cruise control | Semi-automatic transmission | Euro 6-D | TÜV/MOT/APK 02-2027 | Belgian truck *Heavy-duty truck direct from Scania factory* Chassis number: YS2S8X40002169225 EXPORT Transport by truck: Austrian transit license plates with insurance for 21 days + €550 Transport by ship: Transport to port (Antwerp/Rotterdam/Amsterdam) + €300 Transport to port Zeebrugge + €400 More about the truck: Video of the truck (YouTube): More about Geerts Trucks & Trailers: YouTube channel Geerts Trucks & Trailers: Instagram Geerts Trucks & Trailers: Facebook Geerts Trucks & Trailers: TikTok Geerts Trucks & Trailers: LinkedIn Geerts Trucks & Trailers: Follow us and subscribe to our channel to see our latest vehicles! No rights can be derived from erroneous information in the advertisement. Geerts Trucks & Trailers always strives to provide correct information. Technical Information Number of cylinders: 8 Engine displacement: 16,353 cc Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steering; Axle brand: GOOD YEAR; Tire tread left: 70%; Tire tread right: 70% Front axle 2: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steering; Axle brand: GOOD YEAR; Tire tread left: 70%; Tire tread right: 70% Rear axle 1: Tire size: 315/80R22.5; Twin tyres; Differential lock; Max. axle load: 13,000 kg; Axle brand: ALBOURGH; Inner left tread: 50%; Outer left tread: 50%; Inner right tread: 50%; Outer right tread: 50%; Reduction: Hub reduction axles Rear axle 2: Tire size: 315/80R22.5; Twin tyres; Differential lock; Max. axle load: 13,000 kg; Axle brand: DEBICA; Inner left tread: 50%; Outer left tread: 50%; Inner right tread: 50%; Outer right tread: 50%; Reduction: Hub reduction axles Weights Unladen weight: 12,828 kg Payload: 29,052 kg Gross vehicle weight: 41,880 kg Interior Upholstery: Leather Maintenance, History and Condition APK (main technical inspection): valid until 02.2027 Technical condition: very good Optical condition: very good...

Year of construction: 2009, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer -Manufacturer: KTS, Heavy-duty transport wagon industrial trailer type DSL with 1-axle turntable steering -Type: DSL -Platform: 2000/1000/H610 mm -Load capacity: max. 5000 kg Redpfol Tuu Dox Afnst -Tires: Solid rubber -Overall dimensions: 3560/1000/H610 mm -Empty weight: 300 kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 5280/1325/H820 mm / 790 mm extendable to 6070 mm -Load capacity: 16 t -Tires: Solideal 425/150-305 solid rubber dual tires -Dimensions when retracted: 7120/1325/H820 mm Rsdpfsxuqipjx Afnst -Weight: 1760 kg