Used Schneider Screw Compressor for sale (8,051)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by Fpedpjzu Aibjfx Aivjn limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: good (used), Code: 0386 Brand: BOTTARINI AIR KRONE - ITALY Model: KS 22 - CE Standard Silenced screw air-compressor with tank and dryer for craft and industry - CE Standard Features: Palletised design, this means that it can be placed anywhere using a simple transpallet. No bolting down is required. Panel-enclosed design that allows for easy access from all sides for routine maintenance Clearly visible and functional control panel features a pressure gauge, air pressure, running time counter, a digital temperature regulator, and a timer. Light on/off button and fault indicator lights Technical data: Fpsdpfxjy Spkie Aiven Motor power 20 Hp 10 Bar 2 m³/min Air delivery 70 CFM Vertical tank 500 liters Dryer Overall dimensions Compressor mm 700 x 700 x 1000 h - 210 kg Overall dimensions Dryer mm 500 x 500 x 600 h - Kg 50

Condition: excellent (used), Year of construction: 1999, PROD. GRASSAIR TYPE S88.07 S/N 88070799n416 YEAR 1999 POWER (kW) 30 CAPACITY (m3/min) 4.50 PRESSURE (bar) N/A Fpsdpez Dh Uxefx Aivjn HOURS (RUNNING/TOTAL) 6437/10922 INVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2013, ATLAS COPCO GA45VSDFF air compressor, API481000, water-cooled MANUF. ATLASCOPCO Fsdpjz D D Hqofx Aivopn TYPE GA45VSDFF S/N API481000 YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.61 PD (bar) 12.75 HOURS (SERVICE/TOTAL) VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER yes HEAT EXCHANGER yes COOLED (AIR/WATER) water WITH TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2007, PROD. KAESER TYPE ASD57 S/N 1434 YEAR 2007 POWER (kW) 30 CAPACITY (m3/min) 4.5 PRESSURE (bar) 8 Fpedpfxoz D Epyo Aivjn HOURS (RUNNING/TOTAL) 102685 / 112356 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: used, Year of construction: 2022, feed pressure 10 bar liter capacity 2,71 m³ / min motor speeds: 3000 U/min dimensions 1300 x 1000 x 1900 mm total power requirement 18,5 kW weight of the machine ca. 500 kg Features: Fpodpfx Aowq Sz Ieivjn - Focus Control 2.0 control system - Network pressure sensor - Belt-driven drive system - Soundproofed

Condition: excellent (used), S015019 PROD. BOGE TYPE C25 FD S/N 5068559 YEAR 2013 POWER (kW) 18.5 + 0.75kW CAPACITY (m3/min) 3.10 Fsdpfx Ajz Dwd Noivjpn PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 34833 FREQUENCY CONVERTER yes BUILT-IN DRYER yes HEAT EXCHANGER yes COOLED BY (AIR/WATER) air/water ON TANK no DOCUMENTS no NEW/USED USED

Condition: excellent (used), Year of construction: 2008, S015212 PROD. KÄSER TYPE SK21 S/N 2122 YEAR 2008 POWER (kW) 11 CAPACITY (m3/min) 1.75 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 59274/83018 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) air ON TANK no Fpedpfsz Dgmtox Aivsn DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 – 11 bar screw compressor Fpedpfx Aohy Tzyeivsn Manufacturer: Kaeser Type: SM 9 Machine type: Oil-injected screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Delivery rate: 0.75 m³/min Motor rated power: 5.5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2019, PROD. KAESER TYPE CS121 S/N 1210619 Fpedpfx Ajz Dinaeivsn YEAR 1996 POWER (kW) 75 CAPACITY (m3/min) 11.5 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 59688 / 82105 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 NEW/USED USED

Condition: excellent (used), Year of construction: 2004, operating hours: 59,690 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 882 m³/h, pressure (max.): 8.75 bar, type of cooling: water, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar Fpedpfxsyuvwao Aivsn 14.70 m³/min

Condition: excellent (used), Year of construction: 2010, S016246 S/N CAI406542 YEAR 2010 POWER (kW) 11 CAPACITY (m3/min) 1.25 PRESSURE (bar) 12.75 HOURS (RUNNING/TOTAL) 18576 FREQUENCY CONVERTER no BUILT-IN DRYER yes, R134a 0.48kg EXCHANGER no Fpjdpfx Asz Dgcujivjn COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: excellent (used), Year of construction: 2016, S016967 PROD. KAESER TYPE SK22 S/N 1566 YEAR 2016 POWER (kW) 11 CAPACITY (m3/min) 1.75 PRESSURE (bar) 8 Fjdpfxjz Duqte Aivepn HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: ready for operation (used), Year of construction: 2022, Power: 15kW, maximum shaft speed: 3000rpm, oil capacity: 6l, tank capacity: 500l, operating pressure: 10bar, capacity: 2.2m³/min, control panel: Logik 9, length: 1915mm, width: 650mm, height: 1640mm, weight: 530kg, operating hours: 2h, with Wortmann drukosep 2 oil-water separator. Inspection on site is possible. Fsdpfx Aiozhw Rtjvspn

Condition: excellent (used), Year of construction: 2005, S017013 PROD. KAESER TYPE SK21T Fpedpfx Aiez Dgp Usvjn S/N 1145 YEAR 2005 POWER (kW) 11 CAPACITY (m3/min) 1.5 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 772025 FREQUENCY CONVERTER no BUILT-IN DRYER yes, R134a 0.65 kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Condition: excellent (used), Year of construction: 2004, PROD. KAESER TYPE ASD37 SFC S/N 1201 YEAR 2004 POWER (kW) 22 CAPACITY (m3/min) 1.05-4.64 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 103454/94596 VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no Fodpjz Dg Azofx Aivepn DOCUMENTS no CONNECTION 1 1/4' NEW/USED USED

Condition: as good as new (ex-display), Compressor, rotary screw compressor, high pressure gas compressor, industrial refrigeration compressor, Howden MK1S,Used machine Fodpfey Snk Ujx Aivepn Manufacturer: Howden Compressors Limited Type: MK1S WRViHS/365193/58/028 Serial No: N12533 -max. inlet pressure: 2.9 bar g -max. working pressure (outlet): 35.5 bar g -casing design pressure: 42.0 bar g -hydraulic test pressure: 63.0 bar g -max. continuous speed: 2970 RPM -setting: variable volume ratio (Vi setting) -place of manufacture: Glasgow, G52 1BE

Condition: new, Year of construction: 2026, PROD. MARK TYPE MSM3 D 200 S/N ITJ1061384 YEAR 2026 POWER (kW) 3 OUTPUT (m3/min) 0.33 m3/min PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 0 INVERTER NO BUILT-IN DRYER YES, R513a, 0.17 kg EXCHANGER NO Fsdpjz I Riysfx Aivjpn COOLED BY (AIR/WATER) Air WITH TANK YES, 200 L DOCUMENTS YES New/Used NEW

Condition: excellent (used), Year of construction: 2016, S016860 PROD. ATLASCOPCO TYPE GA160 S/N APF208686 YEAR 2016 Fjdpfx Asz Dgbqsivepn POWER (kW) 164 CAPACITY (m3/min) 21 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 3 NEW/USED USED

Condition: used, BOGE C 9 Screw Compressor, 7.5 kW / 10 bar Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Machine Type: Screw Compressor / Industrial Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar For sale is a used BOGE C 9 screw compressor, including the ELMED HELIO-STROB BETA A2 stroboscope measuring system, separate stroboscope hand lamp, connection cable and operating manual. The compressor is suitable for supplying compressed air to machines, workshops, production facilities and manufacturing companies, as well as for general industrial compressed air applications. Operation is via the BOGE base control system with a digital operating and display panel. Technical data: Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Equipment Type: Screw Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar Motor Power: 7.5 kW Motor Speed: 3000 min⁻¹ Operating Hours (according to display): 15,749 h Control System: BOGE base control CE Marking: present Made in Germany ELMED HELIO-STROB: Manufacturer: ELMED Messtechnik Series: HELIO-STROB Type: BETA A2 Equipment Type: Stroboscope Measuring System Mains Connection: 115 / 230 V AC Mains Frequency: 50–60 Hz Max. Power Consumption: 80 VA External Clock Input: present CE Marking: present BOGE base control system Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking ELMED HELIO-STROB BETA A2 control unit ELMED stroboscope hand lamp External clock input Digital display Connection cable Operating manual HELIO-STROB Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. BOGE operating display shown in the on state. ELMED HELIO-STROB shown in the on state. Nameplates present. Fsdpfx Aiezxpi Novjpn Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm ELMED HELIO-STROB BETA A2 control unit: approx. 280 × 240 × 80 mm ELMED hand lamp: approx. 182.5 × 117 × 117 mm Shipping Data: Weight BOGE C 9: approx. 215 kg Weight ELMED control unit: approx. 2.3 kg Weight ELMED hand lamp: approx. 1.5 kg Total weight of equipment: approx. 219 kg plus cable and operating manual Shipping by freight forwarder possible Scope of Delivery: 1 × BOGE C 9 screw compressor 1 × ELMED HELIO-STROB BETA A2 control unit 1 × ELMED stroboscope hand lamp 1 × Connection cable 1 × Operating manual HELIO-STROB Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), ABAC SPINN compressor Air dryer, Tank: 270 liters, 7.5 kW motor, Fpodpfez Epd Djx Aivon Pressure: 10 bar, Weight: 250 kg.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: ITJ291580, power: 15 kW (20.39 HP), Equipment: compressed air system, compressor, type plate available, The Chicago Pneumatic CPVSD20 UL compressor is a 15 kW lubricated industrial unit, ideal for various applications requiring a working pressure of up to 10 bar. Although it is a used unit, this device is designed to deliver reliable and long-lasting performance in a demanding industrial environment. Fodpfozfzagjx Aivjpn Chicago Pneumatic compressors are known for their energy efficiency and their ability to adapt to fluctuating compressed air needs, thanks to their advanced control system. The CPVSD20 UL model, in particular, offers an excellent balance between power and economy, making it a wise choice for users seeking to combine performance and reduced operating costs. By choosing this compressor, you benefit from a robust and proven machine, ready to be integrated into your production line or used in specific applications requiring constant pressure. It is an investment that goes hand in hand with reliability and quality, thereby ensuring uninterrupted operation for your industrial processes.

Condition: excellent (used), Year of construction: 2003, S014178 PROD. ATLAS COPCO TYPE GX7 S/N AII629046 YEAR 2003 POWER (kW) 7.5 Fedpfxsz D Duhe Aivepn CAPACITY (m3/min) 1.17 PRESSURE (bar) 10 HOURS (SERVICE/TOTAL) 21268 FREQUENCY CONVERTER NO BUILT-IN DRYER NO HEAT EXCHANGER NO COOLED (AIR/WATER) AIR WITH TANK YES, 500 L DOCUMENTS YES, available at the service center NEW/USED USED

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, power: 400 kW (543.85 HP), volume flow: 3,996 m³/h, pressure (max.): 8.5 bar, type of cooling: water, Equipment: type plate available, Second-hand Atlas Copco GA400W 400 kW, 8.5 bar with 66.60 m³/min Water-cooled. Year of manufacture: 2009. Fsdpfx Ajw A N Dwoivjpn

Condition: used, Year of construction: 2014, functionality: fully functional, power: 315 kW (428.28 HP), pressure (max.): 10.4 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco ZT315VSDFF Inverter and dryer integrated Year of manufacture: 2014 Fodpsz N Evxefx Aivspn Total operating hours/load hours: 32,354/32,056 h Maximum pressure: 10.4 bar Delivery rate: 22.3 – 44.6 m3/min