Used S&F Gmbh Ath 220X530/3 for sale (123,594)

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). Iodpfxowf Rg Ee Amijib --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC Iiedpfowf Rgxex Amieb version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 Iiodpowf Rgrsfx Amiob --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: new, functionality: fully functional, power: 14 kW (19.03 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 2,500 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.07 m³, Year of construction: 2025, operating hours: 20 h, Equipment: adjustable boom, adjustable chassis, air conditioning, cabin, hydraulics, parking heater, quick-change device, steel tracks, SPECIAL PRICE – CLEARANCE SALE – ONLY 2 UNITS AVAILABLE! HT25 PRO Mini Excavator with 2.5 t operating weight, equipped for professional applications in construction, civil engineering, landscaping, and municipal sectors. ➡️ Special price due to stock clearance / B-grade equipment ➡️ Technically fully operational, ready for immediate use ➡️ Machine with up to 20 operating hours ➡️ Includes hydraulic quick coupler and 3 buckets (25 / 50 / 100 cm) ➡️ Cosmetic defects, storage marks, or transport damage possible The machine features a robust specification and is designed for demanding tasks. Standard steel tracks ensure high stability, excellent traction, and long service life, even in tough operating conditions. Get in, start, and work – this excavator is ready to operate immediately and works flawlessly. EQUIPMENT & BENEFITS: • Kubota D1105 diesel engine (original) • 14 kW continuous power / up to 18.4 kW peak • Water-cooled diesel engine • Standard steel tracks • Load-sensing hydraulics • Hydraulic flow rate: 61.6 l/min • Hydraulic pressure up to 25 MPa • Side-swing boom • Enclosed comfort cab • Heating and air conditioning • Ergonomic joystick controls • LED work lighting • Hydraulic quick coupler • Includes 3 buckets: 25 cm, 50 cm, and 100 cm TECHNICAL DATA: • Operating weight: approx. 2,500 kg • Digging depth: up to 2,370 mm • Dump height: up to 3,500 mm • Transport width: approx. 1,500 mm • Travel speed: approx. 2–4 km/h Isdjx Hhu Nopfx Amieib • Climbing ability: approx. 30° Price €15,000 net plus VAT Sales Notice: Sold as B-grade / special clearance item. The machine is fully functional, immediately operational, and is sold with a hydraulic quick coupler and a set of 3 buckets (25 / 50 / 100 cm). Cosmetic defects, storage, or transport damage may be present. Operating hours up to 20 hours. Location / Delivery 📍 Location: Rheda-Wiedenbrück 🚚 Delivery throughout Germany and Europe available at extra cost 🔧 Inspection available by appointment Only 2 machines left – while stocks last. Contact us now to secure the special price and start working immediately.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Isdowymlyepfx Amijib Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: as good as new (ex-display), Year of construction: 2021, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, lighting, AIM coordinate measuring centers are the technical successors of the Mahr Ijdog Ewk Rjpfx Amisib Mahr multisensor coordinate measuring coordinate measuring machines. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm weight: approx. 1.200 kg max. workpiece weight: on glass plate approx. 40 kg Accuracies: U1=1,9 + L/200 U2=2,4 + L/150 U3=2,9 + L/100 (L= measuring length in mm) increased accuracy on request traversing speed: 200 mm/s acceleration: 400 mm/s scale resolution: 0.0001 mm Multisensor sensor unit (MSH) optical/tactile/laser -incl. high-precision USB camera with 2-stage zoom with telecentric beam path -incl. PTL01 TTL point laser, highly accurate, telecentrically coupled in -incl. Renishaw TP200 integrated tactile probe system, optionally extendable -incl. Quad-Light LED Power Ringlight, programmable incident light -incl. LED power transmitted light -incl. Nikon precision lens 5x (optional 3x, 10x, 20x, 50x) C-Mount Technology -incl. calibration standard with factory calibration certificate, consisting of glass plate "circle", calibration sphere and ring gauge Transfer -State-of-the-art PT200 CNC controller system in a solid, industry-standard control cabinet -PCI-BUS system for fast internal data transfer in real-time operation -Extendable 19" controller rack for optimum access in case of servicing -modular controller concept open for later upgrades and retrofits -service-optimized controller design fast access and service times -Integrated 64-bit broadband bus technology with Ech [...]

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, 6 station swing arm inserting machine General overhaul 2022 PLC controlled Color touch panel for user guidance Any kind of reading can be integrated Iijdpfx Aedygvqjmiob

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, 6 station swingarm machine, overhaul 2022 completely new PLC machine control (no pitney bowes control) Iiodpfx Amjdyk Sasijb Operation via color touch panel electronic gripper controls, Program can be extended at any time and adapted to customer requirements, various reading systems can be integrated Roller ejection with programmable divert bin Warranty 1 year

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, 6 station swing arm inserting machine General overhaul 2026 PLC controlled Color touch panel for user guidance Any kind of reading can be integrated Iiedpfshl H Irex Amieb

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, type of input current: AC, type of cooling: air, overall weight: 120 kg, scan area length: 150 mm, scan area width: 150 mm, space requirement width: 1,550 mm, space requirement height: 2,050 mm, laser wavelength: 1,064 nm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) Iiodjxd Az Nepfx Amieb - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: used, Used DC motor Anchor 460V // Current 325A Iodpewbhg Usfx Amioib field 340V // current 4,7 A Speed 1880rpm Power 138kW

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Area: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Resolution (Travel): 0.01 mm Test Speed: 0.03 - 1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, which means that a "quick test" can be performed even without a PC. For tests requiring data storage and curve recording, our basic software enables you to control the machine and evaluate results. The software allows you to generate different test sequences and create test reports. Furthermore, you can export raw data for further processing in your own programs. Iijdpfx Aoydazujmiob Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips/accessories: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: new, Universal testing machine PM50 Force: 50 kN cross beam stroke: 1200 mm Installation space: 400 mm Iedpfjd R Dp Ejx Amisib Overall height: 1817 mm Weight: ca.380 Kg Travel resolution: 0.01 mm Testing speed: 0.03-1000 mm / min Return speed: 1000 mm / min Force transducer: 50 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Iisdpfx Amoyxc Twsiob

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: Isdpfx Ajnfvx Nemijib The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: like new (used), 800 m² storage platform Schäfer R3000 3-story used, top condition, as good as new, see pictures 3 floor shelf system Schäfer Iisdpfxohzw Ivs Amieb Lift included Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of cooling: air, laser wavelength: 1,064 nm, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt Iiedpfx Aswlc Stomisb - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) Iedpfjwkpvvjx Amisib - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Year of construction: 2026, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile Iedpfxjv Sybye Amieib - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Iiodpfxjwnm Ukj Amieb Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Condition: used, Year of construction: 1994, Mechanical sorting and conveying unit Iiedpfx Amswtnl Usijb

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Iiodpfxoywpahs Amisb Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: good (used), Manufacturer: Rhein-Nadel Automatisation GmbH Type: SRC-N 630-1 R Vibration frequency: 50 Hz/3000 min -1 Electrical power: 220 V Drum diameter: 900mm Iedpfx Asgth U Ijmieib Adjustable vibration

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, warranty duration: 12 months, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design Iedpfxsyycqxo Amisib • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: excellent (used), 3 pieces Collet chuck adapter, 20 mm shank, equivalent to 3R-653 Mini holder chuck adapter 3R-653 for 20 mm shanks Incl. drawbar Equivalent to: Manual chuck adapter, Macro-Mini, 3R-653 Incl. 3 pieces drawbar 3R-605.1E Iedjw E Hicepfx Amioib Unit price: €200