Used Reifenhäuser Extruder for sale (364)

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.5 - Year: 2005 - Double parallel screws ø85mm 17D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Bjdsuziyhspfx Alcjlh Very good condition

Year of construction: 2001, operating hours: 64,499 h, condition: good (used), Conical screws, approx. 110 kg/h. A.C. motor 30.0 kW. New motor, 64,499 operating hours. Bljdpfx Alew Hy Uujcjh

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Bjdpfxeyhd Dbe Alcolh Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Year of construction: 2011, condition: ready for operation (used), Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. Blodpfxohtvmhj Alcoh

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Bsdpfxshz Dyao Alcolh

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 Bjdpfjpaiaiex Alcslh - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW Bodpfjyg Eghox Alcslh L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Year of construction: 2022, condition: used, Model: TJ-750 Suitable Sheet: PP/PS/PET Max. Sheet Width: 750mm Sheet Thickness Range: 0.35-2mm Screw Rod Dia.: 75mm Screw L/D ratio: 40:1 Bsdsyvh Ubspfx Alcslh Main Motor Power: 110kw Total Power: 350kw Max. Output: 300-400kg/hr Power supply: AC 380V, 50Hz, Three-phase, Four-wire Dimension: L22500xW3200xH3600mm Weight: About 15T

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Bledpet Tvx Tofx Alcjh Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.

Year of construction: 2021, operating hours: 220 h, condition: like new (used), functionality: fully functional, machine/vehicle number: B144, HIGH MOISTURE EXTRUSION (HME) Extruder HME is able to create structured, palatable and nutritious products. Possible industries: - Plant-based Food (Clean label products with great texture) - Pet Food Industry (Wet Pet Food Production, Functional treats and chews, Alternative Protein incorporation) - Aquaculture Feed Industry (Structured aquafeeds, Nutrient Enhancement) - Nutritional supplement and medical foods (High-Protein Supplements) - Snack and convenience foods (High-Protein snacks, Meat-Free Meal Kits) - Sustainable and Alternative Protein Products (Insect and Algae Protein Texturization, Upcycled Food Products) The package includes: • High-quality Clextral HME Extruder • Additional equipment enabling faster start of production Bledpfx Alex Ac Utjcsh Reason for sale: We tried with the project in Plant-based industry in Slovenia and stopped the project in Jan. 2025. Machine was bought at the end of 2021, started operating in H1 of 2022 and worked for only 220 hours. Attached you can find a document with key information about the machine and additional equipment. The machine is in excellent condition ("like new"), used for only 220 hours and meticulously maintained – guaranteeing flawless operation and immediate usability after installation. A catalogue of plant-based products we have manufactured is also included. If you are interested in HME extrusion, we invite you to explore the technical documentation, photos, and VIDEO content available upon request.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Blodpfsxnpx Njx Alcoh

Condition: used, Year of construction: 2008, The MAXDROP type machine is used for the production of various pastry products such as muffins, shortcrust biscuits, meringue cookies, sponge cakes, and others. Brand: MaxDrop 2000 Model: AL 200 Head width: 600 mm Recipe memory: up to 90 recipes Machine dimensions: 1100 x 1400 x 1375 mm Year of manufacture: 2008 Power supply: 400 V Installed power: 1.64 kW Bledox Irkdepfx Alceh Weight: 400 kg Condition: used Original technical documentation + CE declaration.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. Bsdpfx Aotqu Dielcslh 5) The automatic filling system activates for the new product.

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. Bjdpfjycfw Ejx Alcjlh A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: new, Machine function: puffing and expanding corn, rice, millet, and sorghum. The end product can be flavored, seasoned, or mixed with other flours before extrusion. Flavoring options: paprika, salt, pepper, garlic powder, mushrooms, natural proteins. Capacity: 12–20 kg/h processed raw material. Motor drive: 4 kW, 0.18 kW. Bledpfx Ajxvxd Relcjh Hopper: maximum 5 kg material. With steam extractor.

Condition: refurbished (used), functionality: fully functional, - Rieter extruder type SP 560/500 with double-shaft mixer type VDWM2107. Diameter 560x500, capacity 25 m3/h, 30 bar; - Rieter extruder type SP 500/500 with double-shaft mixer type VWM3. Screw diameter 500, capacity 20 m3/h; - Rieter Extruder OPTIMAT 600-560, capacity 32 m3/h, 25 bar; - Rieter Extruder type SP 650-600, capacity 65 t/h; - Rieter extruder type UR4, capacity 35 t/h; - Haendle extruder type PZG 56a/50 with mixer type MDVG920, capacity max. up to 30 m3/h, 30 bar; Blsdpeyk Rwajfx Alceh - Haendle extruder type PZG 56a/40 with mixer type MDVG715, capacity 19 m3/h; - Haendle Extruder type PZG60b56 with mixer type MDVG920b, capacity 32 m3/h, 24 bar; - Haendle Extruder type PZG60b50 with mixer MDVG920a, capacity 29 m3/h, 30 bar; - Petersen extruder VAP 65, 650x560, 2008. Capacity approx. 60 t/h, maximum pressure 55 bar; - Breitenbach Extruder type VAP50 with double-shaft mixer, capacity 40 t/h; - Ishikawa extruder type E-45S, Y-1 with mixer Takasago, capacity 25-30 t/h. - Double-shaft mixer by Haendle type MDVG 715, 915, 920a, 1025; - Planetary mixer by O.M.G. Officine Meccaniche Galletti type P 500

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder • Water Cooled 130kW AC Motor and Drive. – Low Noise Blsdow Snlwopfx Alceh

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) Bjdpfxjy Ufk Rs Alcelh All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: used, GS Mach approx. 6.5" extruder with Water Ring Pelletizer, with Water Ring Pelletizer, spin dryer, screen changer, and hopper, includes all control panels, 177 HP, 3 phase motor, also includes Color Feeder, in working condition, winning bidder responsible for proper disconnection and removal. Bljdpfx Alexd D Nnoceh

Condition: used, Polystruder Extruder with Berringer water ring Pelletizer, 250 HP, 3 phase motor, with screen changer, includes spin dryer, and hopper. Bodjxd D I Dspfx Alcelh

Condition: like new (used), For older butyl extruders from Lenhardt Maschinenbau. Original belts. Belt dimensions: 5600 x 40 mm Application: Manual butyl extruder / Lenhardt Width: 40 mm Thickness: approx. 2 mm Bledpfoy D Hvmex Alcjh Length: 5600 mm Weight: 567 g Condition: Like new

Condition: good (used), Extruder for the production of plastic pipes Bodpexcwxyjfx Alcslh The machine can be inspected by appointment! Videos demonstrating its operation can be viewed on the manufacturer's website!

Year of construction: 2023, condition: new, Coperion ZSK 27 MV Plus extrusion line Application: Pharma dental sticks Year: 2023, never used, still in original packaging Bljdpfxsxr Hgxo Alceh

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, Blodpfx Aou R S Hcjlcoh easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: ready for operation (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, number of previous owners: 2, Equipment: cooling unit, type plate available, The twin-screw extruder has been used little. New screw shafts and a water cooling system have been overhauled. The control cabinet is present. The calender has a 1.75 mm x 2-hole strand die. Bjdpfxov I R Trs Alcjlh