Used Reform M14 for sale (163)

Condition: good (used), Year of construction: 2013, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: MTF, belt conveyor on solid base frame, height adjustable -Type: GL-HM 140 -Speed: 9 m/min Hsdotp Rfpepfx Ap Eofn -Belt width: 275 mm -Conveyor length: 3000 mm -Drive: ATB 0.18 kW, see photo type plate -Transport dimensions: 3060/500/H930 mm -Weight: 89 kg

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Hsdeg N Nl Ijpfx Ap Eofn Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Substructure 900 x 600 x 875 mm

Condition: new, Precision, quiet, and reliable drill press. Built according to strict safety standards. Precision spindle with hardened Morse taper and machined base plate. Electronic speed control included. Rotating table + vise, 350 x 250 mm. Drilling capacity in steel: R50 mm, ø 22. Tapping capacity in steel: R50 mm, M14. Spindle taper: CM2. Spindle stroke: 90 mm. Spindle bore diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU transmission. Electronic speed control (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V, single-phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Hfodpjir Aihofx Ap Eon Weight: 220 kg.

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Hfedpfeg N Nl Dsx Ap Ejn Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks Hsdpjv Ta Dkefx Ap Eefn -Manufacturer: Bosch, double-acting hydraulic cylinder, stroke 75 mm -Type: Piston rod: Ø 20 mm / M14 -Holes: Ø 20 mm -Dimensions: Ø 65 x 300 mm -Weight: 3.0 kg

Condition: used, Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, linear guide rail -Guide rail: Linear guide rail, 2 pieces -Rail length: 1450 mm -Rail width: 20 mm -Dimensions: in the pictures Hodpsuu U U Ajfx Ap Eefn -Delivery/Price: complete -Transport dimensions: 1450/40/H18 mm -Weight: 7.3 kg

Condition: used, Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-loaded brake, multi-disc spring-loaded brake -Manufacturer: Stromag, fluid-switched multi-plate spring-loaded brake from the GSL aerial work platform Hsdpfeizug Dox Ap Eofn -Bolt circle: Ø 160 mm M14 -Dimensions: see photos -universally applicable -Number: 2x brakes available -Price per piece -Dimensions: 220/190/H190 mm -Weight: 19kg/pcs

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Max capacity TON 20 Approach speed (in rapid) mm/min 1700 Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Cylinder rod diameter mm 45 Shank diameter mm M14 Tank capacity liters 30 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Hfjdpfjrvz A Ssx Ap Ejn Weight Kg 200

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device Hedpfx Aoyvvrbjp Eofn - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, Year of construction: 2026, The CORMAK 4MT collet chuck set with 8 × ER collets (Ø4–16 mm) is a precision tool designed for holding ER-type tooling of different diameters. It features a 4MT taper and an M14 drawbolt, ensuring a solid and accurate fit in the machine spindle. The set is supplied with a spanner for the chuck nut and a practical transport case for comfortable use and easy storage. Collet chuck with nut for ER collets 4MT taper mounting Through drawbolt M14 Hfedpfx Ajycqr Ujp Een ER collets Collet length: 45 mm Collet diameter: 24 mm Collet size range 4–16 mm: 4 5 6 8 10 12 14 16 Set includes: Collet chuck holder 4MT/M14 8 × ER collets Spanner for chuck nut Transport case (please note: depending on supply, the case may be made of PVC or wood)

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  V03024) Glue Spreader "OMMA" V03025) Motorized Conveyoring Disks way "OMMA" V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" Hfodpfxjdun Nij Ap Esn V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 980x860x1380 mm Hfjdpfxsv Ucf Ts Ap Een Weight 165 kg Total power requirement 0,75 kw

Condition: new, sheet width 1250 mm Hfsdpfx Apsyvvpye Een plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,400 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,400 kg, total height: 2,492 mm, total length: 4,367 mm, total width: 3,070 mm, table length: 1,500 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Left side auger chip conveyors Hedporg Htpofx Ap Eofn Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: new, neu ca. 4 Wochen ab Auftragse Polen 7390 € 142.63 € 1 1 14 mm 30 ° 9 U/min 6 - 40 mm 55 mm 100 mm 2600 mm/min 2.2 kW 589 mm 541 mm 320 mm 65 kg bevelling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel or aluminum alloys bevelling of lower edge in inverted position standard shearing cutter for processing stainless/alloyed steel reversible spindle against stuck milling tool STANDARD SET ABM-14 beveller milling cutter for stainless steel cutter extraction tool tube bevelling shaft tube bevelling washer flat wrenches: 12 - 13 mm, 18 - 19 mm, 24 - 26 mm hex wrenches: 5 / 6 mm user manual Hedpfoyrhn Ssx Ap Esfn

Condition: good (used), Year of construction: 1993, operating hours: 3,800 h, functionality: fully functional, overall weight: 10,500 kg, fuel type: diesel, power: 1,299 kW (1,766.15 HP), motor manufacturer: Deutz, A used emergency generator is offered with the following data. Technical data: Engine: Deutz TBD 620 V12 Generator: Piller Power: 1400 KVA Hfodpfx Asvmzwxjp Ejn Frequency: 50 Hz Voltage: 230/400 V Year of manufacture: 1993 Operating hours: 3800 Incl. control cabinet Incl. silencer

Condition: new, Year of construction: 2025, machine/vehicle number: 618621425, Marini Magnum 140 mobile asphalt mixing plant Year: NEW Capacity: up to 140 t/h 1 year warranty - Calorific value of the fuel: 9,600 kcal/kg - Material passing through the #8 (2.38mm) sieve: no more than 20% - The equipment was developed to facilitate transportation as much as possible without the need for pilot vehicles. Simply connect the equipment to the asphalt binder storage and fuel system. - Chassis is constructed with a highly resistant I-beam with a forged kingpin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, and a mechanical support leg with telescopic support. - Quadruple feed bin (two-by-two) with a 3.80mm wide opening and a capacity of 6m3, completely designed to withstand the stresses during material unloading. Regulated slide gate for aggregate flow. - Automatic vibrator system for one bin, which facilitates the flow of fine aggregates with high humidity levels in one of the bins. - Feeding belts with 20" wide canvas supported by 4" rollers in a "V" configuration with permanent lubrication. The gearbox is directly connected to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor. - Conveyor belt in U-beam, 24" wide canvas supported by 4 rollers in a V configuration with shielded rollers actuated by an electric motor. - Sieve with a screen for eliminating oversized materials. - Drum dryer and mixer with heat insulation, four driven support rollers made of high-carbon steel, driven by a gearbox, 15hp electric motor. Hfedpfxshd I T So Ap Esn - Rotational external mixer - Burner with fuel spraying via gear pump, Kcal/h - Dry filtering system consisting of a dust collection system - Control system: Sistex Further options and accessories: Control system, control room, dust filter/dust collector Further information: Intended use: Construction, Usable material: Asphalt, Overall condition: very good, Technical condition: very good, Visual condition: very good.

Condition: new, Three-roll – Round bending machine Akyapak ASM 140-20/4 Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display sheet metal width 2050 mm sheet metal thickness 4.5 mm max. sheet metal thickness 4.0 mm for pre-bending roll length 2050 mm smallest diameter 210 mm roll diameter - top 140 mm weight 1530 kg Hodpfx Ajd R Iqxsp Esfn dimensions L-W-H 3220 x 1200 x 900 mm Equipment: top and bottom rolls electrically driven top roll can be swiveled out taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety cable foot switch operating manual in German CE marking / declaration of conformity

Condition: as good as new (ex-display), functionality: fully functional, power: 25 kW (33.99 HP), overall weight: 141 kg, Year of construction: 2026, operating hours: 5 h, machine/vehicle number: MM-14-K, Our anchor drives for mini excavators up to 3.5 tons have been developed in collaboration with leading screw anchor/pile installation companies worldwide. Digga’s series of compact planetary drives forms a comprehensive portfolio for the foundation drilling, piling, screw pile, and utility construction markets. Digga anchor drives are manufactured in Australia, specifically for the diverse global landscape. With the alignment system located in the drill head, HALO indicates to the user, by means of a series of LEDs, whether the drill head is aligned straight. If the drive moves from its perpendicular position, a series of red and green lights illuminate to effortlessly guide the user back to a straight position. FEATURES • Compact, high-torque gearbox manufactured by Digga Hfedez Irtgepfx Ap Eon • Lightweight and compact for easy maneuverability • Equipped with a high-efficiency Danfoss/Digga roller hydraulic motor • More than 40 years of design and manufacturing experience • 1-year warranty on gearbox and 1-year warranty on motor

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3000x3000x1800 mm Hfodpfx Apsv A E I Hj Eon Weight 1000 kg Total power requirement 10 kw

Condition: excellent (used), Crane control system, controller, safety control system, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, gear limit switch, contact evaluator, frequency evaluator Hedpfx Aezmribsp Eefn -Manufacturer: DEMAG, crane control contact evaluator, original packaging -Type: Dematik MKA-2 -Item No.: 46967044 -Cardboard dimensions: 175/115/H60 mm -Weight: 0.3 kg

Condition: excellent (used), Quick-release nut for balancing machine, clamping nut Hjdpfx Aox Nnx Hjp Esfn -Manufacturer: Haweka, quick-release nut for balancing machine -Item No.: 143 403 003 -Suitable for: Haweka ProGrip clamping devices with 40 x 3 mm shaft -Quantity: 1x quick-release nut included -Price: per piece -Dimensions: 290/92/H80 mm -Weight: 0.7 kg/pc.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 353 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN B + 1-year warranty + Includes aquamatic system + Includes end cell connectors & REMA 320 connector (other types available on request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,035 mm Width: 353 mm Height: 784 mm Weight: approx. 770 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde E 15 C - 322-00 Linde E 18 Z - 322-00 Linde R 10 BN - 1120-00 Linde R 10 CN - 1120-00 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - frontal changeover Linde R 12 BN - 1120-00 Linde R 12 CN - 1120-00 Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - frontal changeover Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 CN - 1120-00 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - frontal changeover Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 16 AS 1140 - 1120-00 Linde R 16 CN - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - frontal changeover Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N HD - 1120-00 - frontal changeover Linde R 16 SN - 115-08 Linde R 16 SN - 115-12 Linde R 20 - 1120-00 Linde R 20 W - 1120-00 Linde V - 5213-00 Linde V 10 E - 146-00 Linde V MODULAR - 5213-00 Crown ESR 5220-1.4 Still FM 14 N Jungheinrich ET 110 Jungheinrich ET 112 Jungheinrich ETV Jungheinrich ETV 110 Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV Q TCM RTL140 Common battery sizes available – please inquire. Transport can be arranged. Hjdey Rnlcepfx Ap Ejfn

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 650 mm, total length: 984 mm, total width: 415 mm, Tested forklift battery for your truck – 48V 3PZS 375Ah – Special tank + 1 year warranty + Including Aquamatik (automatic watering system) + Including end connectors & REMA 320 plug (other plugs can be installed if required) + Capacity: min. 90–100% (C5 capacity report supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length: 984 mm Width: 415 mm Height: 650 mm Weight: approx. 580 kg Suitable for the following models and others: Toyota 2FBE10 Toyota 2FBE13 Toyota 5FBE10 Toyota 5FBE13 Toyota 7FBE10 Toyota 7FBE13 Hsdpfx Apjy Rnmae Eofn Toyota 7FBR13 Toyota 7FBRE16N Toyota/BT RR-M 14 Toyota/BT RRE 140 M Toyota/BT RRE 160 M Atlet ET 150 Komatsu FB13M-2 Mitsubishi FB13TCA Mitsubishi FB15TCA Nichiyu FB13 Nichiyu FBT13 Nichiyu FBT13-18 Nichiyu FBT15 Nissan N01L13 Gjbnswqdtis Nkmgxsbp Nissan N01L13U Nissan S1N1L13Q Nissan TX13 Nissan TX15 Nuova Detas SE 315 Rocla TMF131 UniCarriers AS1N1TX13 Common battery sizes available – please inquire. Transport possible.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. Hedohzbipopfx Ap Eefn - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.