Used Otc Fd19-V25L for sale (186)

Condition: new, Year of construction: 2026, Motor: 4 kW Voltage: 230V 3F, 400V 3F or 460V 3F Belt speed: 45 m/s, 4300 r/p Belt dimensions: 100×2000 mm / 150×2000 mm Sanding diameter: Ø20-Ø114.3 Sanding angle: 20 - 90º Operation: Lever and manual wheel operation 2-in-1 pipe grinder The new AL150HS has a belt speed of 45 m/s thanks to its unique gearbox. If you open the tailgate, the pipe grinder can also be used as a belt grinder, ideal for deburring polished profiles. The AL150HS can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150HS you can grind material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150HS from ALMI can be used to process square, rectangular and round pipes with different wall thicknesses and in all common materials. The ALMI belt adjustment system now makes it even easier to adjust the sanding belt using the hexagon key supplied. The sanding belt can be tensioned quickly and the sanding rollers can be changed in just a few seconds. Sanding at high speed Thanks to new developments, ALMI has been able to achieve a sanding speed of 45 m/s with the renewed AL150HS. This gives the sanding belt a longer service life, as the faster sanding means there is less heat in the material, resulting in less discoloration and fine dust. Gedpszzk Aiefx Aivebu

Condition: used, Year of construction: 1997, machine/vehicle number: 79, Abstanz- und Einkerbmaschine / Cutting and Notching machine Schmedt PräCut 65Baujahr / Year 1997 - Serial-No. 79 Book block height: up to 350 mm Book block thickness: up to 90 mm Air supply: 10 bar Power supply: 400 V / 50 Hz / 1,6 kW (three-phase) Output: approx. 250 - 350 pcs / hour Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Godpjlg Aahofx Aivsbu Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, functionality: fully functional, EUROMAC MULTI 220/6R NOTCHING MACHINE Maximum cutting length 220 mm Maximum sheet thickness 6 mm Variable cutting angle 30 - 120 WITH PUNCHING MACHINE EUROMAC Multi 220/6R 2-station notching and bending machine Press brake, press brake, cutting machine Cutting capacity steel from 6 mm to 45 kg/mm2 Becu Akmemck Ryo Iswn 4 mm for stainless steel Station I (notching) Notching angle from 60° to 140° (with special knives from 30° to 140°) Knife length 220 mm Table dimensions 950 x 640 - manual angle adjustment by handwheels - Notching angle with built-in knife set from 60° to 140° - hydraulic knife locking upper and lower - automatic cutting gap adjustment - Blank holder - Measuring tapes built into the table - Stop guides with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 tons Table dimensions 950 x 340 Working height 1100 mm - Regular lifting speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4 prisms 90°, length = 415 mm - Upper tool 90°, length = 415 mm Motor power 4kW Mains connection 400 volts, 50 Hz OVERALL DIMENSIONS 115X100X125 Gsdpfjwqdfxjx Aivebu WEIGHT: 900 KG

Condition: used, Year of construction: 1981, plate thickness 4 mm blade length 250 mm angle adjustable from - to fest 90 Grad table surface area 900 x 800 mm weight of the machine ca. 0,65 t Gsdpfjp U Utfox Aivebu dimensions 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 8700 € 167.91 € 250 mm 6 mm 3 mm 25 1/min 90 ° 4 kW 950 mm Gjdpfswiqlvox Aivjbu 780 mm 1115 mm 585 kg Hydraulic drive Automatic adjustment of the blade gap 2 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to "CE" regulations User manual in English or German

Year of construction: 2026, condition: new, New notching sawing machine LGF ALFA 55 with Ø 500 mm and Ø 550 mm sawblades. Machine in stock Specification: - Machine totally enclosed - Cylinder stroke 825 mm - Adjustable feeding of the sawing carriage 4-10 mt/min - Both saw blades tilting range +/- 45° by means of hand wheel - Possibility to perform cuts at any intermediate degrees - Adjustable working bench in terms of height and depth by means of hand wheels - Tilting fence on the working bench at 60°/90°/-60° - Maximum profile height 215 mm - Maximum profile width 250 mm - Maximim depth of horizontal cut 190 mm - Maximum depth of vertical cut 200 mm - Three phase self-braking motors 2,2 KW (3 HP) - 2800 rpm - Saw blade shaft Ø 30 mm - Working pressure 7 bar Equipment: - Nr. 1 Digital Display on tilting fence - Nr. 2 Digital Display on saw blade tilting - Nr. 1 Digital Display on fence for profile tilting - Nr. 1 Analogical counter on working surface height - Nr. 1 Vertical TCT saw blade Ø 550 mm - Nr. 1 Horizontal TCT saw blade Ø 500 mm - Pneumatic clamps Gboded Nh S Nspfx Aivju - Automatic lubrication by means of nebulizer - Waste retrieval front tank on wheels - Nr. 2 waste retrieval tanks on the sides - Air filter - Service spanners

Condition: good (used), Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear Gedpsdf U S Aefx Aivsbu -Max. cutting capacity: approx. 2 mm -Blade length: 102 mm -Dimensions: 620/590/H1790 mm -Weight: 150 kg

Condition: new, - Capacity 250 x 8 mm - Hydraulic - Foot control - Central lubrication system - Emergency stop - Documentation - 400V Gedpfx Aienwlptevebu

Condition: used, Seed distribution station, moistening, seeding, Kövy bread roll systems – best suited for Kövy bread roll systems. Gjdpfoz A Spkjx Aivebu

Condition: new, Year of construction: 2026, Motor: 4 kW Belt speed: 30 m/s, 2800 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Sanding diameter: Ø20-Ø114.3 Sanding angle: 20 - 90º Operation: Lever and manual wheel operation Weight: 260 kg Easy to operate The AL150 can be operated with two hand wheels or with a lever. Both options are available on the machine. With the AL150 you can grind material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150 from ALMI Gbjdozzkzxepfx Aivsu grinds square, rectangular and round pipes with different wall thicknesses and is suitable for all common materials. The ALMI belt adjustment system now makes it even easier to adjust the sanding belt using the hexagon key supplied. The sanding belt can be tensioned quickly and the sanding rollers can be changed in just a few seconds. 2-in-1 pipe grinder The AL150 is equipped with a deburring table with which the pipes can be easily deburred, making the pipe grinder multifunctional.

Condition: used, machine/vehicle number: 1285A, mileage: 40,141 km, power: 46 kW (62.54 HP), first registration: 01/1964, fuel type: gasoline, color: green, gearing type: mechanical, Equipment: all wheel drive, trailer coupling, Oldtimer-Tuv is made new only 332,- Euro tax and insurance per year , The Willys-Jeep is the Us-Jeep of the second world war. A real feast for the eyes for every military vehicle fan. The Jeeps are in a very good original condition, also the body is in a great condition has not been welded yet has of course no holes!!!! directly from the French military very well maintained and serviced!!! Equipped with: folding windshield, soft top, manual transmission with 3 gears plus off-road reduction, four-wheel drive, 4-cylinder in-line engine side-controlled with 2161cm? The Jeep drives really great!!! Tire size 6.50 - 16, ere M201 in stock! Also other all-wheel drive vehicles and other military vehicles are still available in my offer. All my vehicles can be seen with technical data and prices on my homepage. For more information call 0049 (0)2248 le Greetings your Philipp from the Hanfbachtal Gbsdpfx Aisqx Szgovou

Condition: used, functionality: fully functional, Year of construction: 2021, overall weight: 4,850 kg, Equipment: front power take-off, Manufacturer: Krone Model: Swadro TC 1250 Year of purchase: 2023 Used, with signs of wear, good condition Important information: A functional video can be sent upon request. Technical data according to the manufacturer: Four-rotor center-delivery rake Working width: 9,800 - 12,500 mm Swath width approx. 1,400 - 2,200 mm* Transport width approx. 2,990 mm Transport height: approx. 3,990 mm Weight approx. 4,850 kg (base machine) Rotor diameter: Front: 3,300 mm, rear: 2,960 mm Eleven tine arms in front, 13 tine arms in the rear Max. PTO speed 540 rpm Power requirement approx. 59 kW (80 hp) Required hydraulic connections: 1 x single-acting, 1 x double-acting Gsdpfoz Hvldox Aivebu Standard equipment: Mounting Two-point mounting bracket (Cat II) incl. pivoting suspension via ball joint and roller Two-leg support Drive train Rotor gearbox with maintenance-free grease filling, completely hardened KRONE Dura-Max cam track KRONE Easy-Line drive concept (front rotor pair rotates approx. 25% faster than the rear) Rotors individually protected by overload clutch PTO shaft, wide-angle joint on one side, 1 3/8", Z=6 Drive train with freewheel Rotors + rotor chassis Cardan rotor suspension incl. Krone Jet effect, mounting of the tine arms by means of maintenance-free ball bearings Four 10.5 mm trailing double tines per arm with a large coil diameter and "lift effect" Tines mounted to prevent loss around the tine arm Rotor height adjustment by hand crank incl. rotor height indicator Easy operation via hydraulic control unit, incl. follow-up control of the rotors Hydraulic relief of the front rotors, spring relief of the rear rotors Four-wheel rotor chassis incl. four trailing feeler wheels Rotor tires: 4 x 16x6.50-8 each Additional equipment: Warning signs and LED lighting Operation via pre-selection control box and tractor-side control valves additionally with: - Tires Vredestein Flotation 500/50 R 17 - Middle swath curtain (hydraulically pivoting) - Hydraulic single-rotor lift via pre-selection switch box (electric) (lifting of the front rotors) including paired lifting of the rotors + 1 single-acting hydraulic valve

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Gjdoznk Aiopfx Aivsbu -Punching tool: Square notching die for profile steel shears and flat steel shears -Width: 50 mm -Dimensions: see photos -Dimensions: 175/60/H125 mm -Weight: 6.6 kg

Condition: new, width of the strips 100 mm band length 2000 mm band speed m/sec Gsdpfot Eaf Usx Aivebu tube diameter 16,5 - 76 mm angle adjustable from - to 0 - 65 Grad connected load frequency 400 V total power requirement 2,2 kW weight of the machine ca. 0,17 t dimensions of the machine ca. 1,3 x 0,7 x 1,1 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm

Condition: new, width of the strips 200 mm band length 1600 mm tube diameter 38 - 170 mm Gbedpfx Aiet Eahieveu connected load frequency 400 V total power requirement 3,0 kW weight of the machine ca. 0,25 t dimensions of the machine ca. 1,4 x 0,8 x 1,35 m Pipe grinding machine with 11 sanding rollers: 38 - 42 - 48 - 52 - 60 - 74 - 90 - 102 - 116 - 138 - 170mm Pipe clamping area 170mm Documentation (English)

Condition: new, Year of construction: 2026, functionality: fully functional, The Randek notching saw JS400C is designed to create notches at the end of wooden pieces, for example, to insert a bracing beam into upright posts. The machine pneumatically clamps the wood and makes two cuts with the two 400 mm diameter saw blades. The maximum length is 380 mm, and the cutting depth can be adjusted up to 115 mm. The saw can be operated quickly and easily using a foot pedal. Functional description The wood to be notched, e.g., a post, is pushed into the covered saw slot until it reaches the set stop. The overhanging end is placed on a roller stand (not included). The foot pedal activates the pneumatic clamping of the inserted wood and initiates the sawing process. Technical description • Notching depth: 30 - 115 mm Gedpfx Aod Arwhoivjbu • Notching lengths: 10 - 380 mm • Wood thickness: 30 - 70 mm • Electrical connection: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5 - 0.8 MPa (5 - 8 bar) • Saw blades: HM 400/30-3.5/2.5/40 Safety The saw is well-protected against accidental contact by means of a cover plate. When the cover is opened, the electrical power is automatically cut off, which minimizes the risk of injury. Advantages • Makes notching/cutting efficient and precise • Flexible and easy to set up • Easy to operate • The adjustable working height and the option to operate the machine with a foot pedal ensure ergonomically correct working conditions for the operator.

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm Gbodpfx Aezm Tkgeivou -Weight: 4.4 kg

Condition: used, Year of construction: 1990, Technical details: Gedsu Ictbepfx Aivjbu plate thickness: 8 mm cutting range: 300 x 300 mm table-size: 1100 x 900 mm voltage: 380 V / Hz Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch *

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. Gbodexaardjpfx Aivsu The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 5932 € 114.49 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm Gbodpfsyui Sqsx Aiveu 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2")and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, Year of construction: 2026, Tube Notcher/Grinder AL 100 U ⦁ Grinds at any desired angle ⦁ Grinds any required diameter ⦁ Suitable for all standard materials ⦁ Designed for pipes and profiles - Operation via eccentric lever - Grinding belt 100 x 2000 mm - Motor 3.0 kW, 400 Volt, 50 Hz - Speed 2905 rpm - Belt speed 30 m/sec. - For tubes from 20 mm to 76 mm Gsdpfsx Irvmsx Aivjbu - Weight 200 kg

Condition: new, Year of construction: 2025, total width: 910 mm, total length: 1,600 mm, total height: 1,360 mm, type of input current: three-phase, overall weight: 360 kg, pipe diameter (max.): 140 mm, input voltage: 380 V, conveyor belt length: 2,000 mm, power: 2.4 kW (3.26 HP), rotational speed (max.): 2,800 rpm, rotational speed (min.): 1,400 rpm, We are offering this new TUGRA TT 140 pipe facing machine, manufactured in 2025. Gsdpfx Aiezbzvzjvsbu Vice capacity (diameter): 40 - 140 mm Belt dimensions: 150 × 2000 mm Motor power/voltage: 2.4-3/380 kW/V Speed (dual): 1400, 2800 rpm Length: 1600 mm Width: 910 mm Height: 1360 mm Weight: 360 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 5104 € 98.51 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm 87 kg The motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2"). Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution! Gjdpsyui S Refx Aivobu The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 6352 € 122.59 € 150 x 2.000 mm 20 - 114,3 mm 1 1 4 kW 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. Gbodpfx Asynmqdeiveu The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm (sample photo)

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei Gjdpfx Aswiq Tgjivobu 17100 € 328.32 € 200 mm 4 - 6 mm 2 - 3 mm 30 1/min 30 - 140 ° 4 kW 900 mm 1150 mm 1240 mm 1150 kg Hydraulic drive Variable cutting angle 30 - 140° Max. thickness (420 N/mm²) : 6 mm (at 60°), 4 mm (at 140°) Max. thickness (600 N/mm²) : 3 mm (at 60°), 3 mm (at 140°) Automatic adjustment of blade gap 4 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to "CE" regulations User manual in English or German