Pipe notcher

AlmiZopf AL 100 U

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Dedpfovx Uvxjx Am Rsch Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, digital display bottom roller

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate Dcodscubatjpfx Am Roh - safe for manual inlay work

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: 1000x40, functionality: fully functional, pressing force: 40 t, total length: 2,300 mm, total width: 1,950 mm, overall weight: 1,850 kg, working width: 1,000 mm, working range: 1,000 mm, Equipment: safety light barrier, Used Like New Ermaksan 1metre x 40ton 3axis cnc downstroke pressbrake for sale Complete with Cybelec Cybtouch 12 Control Year 2020 Specifications Max. bending length 1metre /1000 mm Distance between column 800 mm Max. pressing force 40 Ton Dodevy Ewiepfx Am Rech Beam stroke 100 mm Table Width 90 mm Load more specifications Dimensions (Estimate) Length 2300 mm Width 1950 mm Height 1860 mm Weight 1850 kg Complete with lower multi v tooling and segmented upper tooling

Condition: new, Year of construction: 2026, Mini Crawler Crane TB5000 A mini crane on a crawler chassis designed for indoor and outdoor work. Maximum lifting capacity: 2400 kg. Dcsdpfxjibqrao Am Rsh * radio control of the device - driving, working, spreading the feet * double power supply of the crane - diesel and electric 230 V * maximum lifting capacity - 2400 kg * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension * maximum vertical reach over 13 m * 4 hydraulically lowered supports * weight approx. 2200 kg * height approx. 195 cm * width approx. 88 cm * active arm 16 degrees Additional, optional equipment: * search hook * hydraulic winch 990 kg * Li-ion battery power supply * pads for support feet * hydraulic FLY JIB Available in the selected color.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm Dcedofx Hv Hopfx Am Rjh dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 49,641 h, stroke length: 200 mm, oil tank capacity: 100 l, travel distance X-axis: 300 mm, controller manufacturer: Bystronic, working width: 60 mm, bending force (max.): 40 t, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, control type: CNC control, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, finger protection, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Model: Xpert 40/1030 Tonnage 400 kn Bending length 1030 mm Standard stroke [S] 200 mm Open height [D] 515mm Distance between side frames 1060mm Table Width 60mm Max. back gauge range X-axis 500mm X-axis travel 300 mm X-axis speed 1500 mm/s R-axis travel 100 mm R-axis speed 500 mm/s Z-axis travel 955 mm Z-axis speed 2000 mm/s Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm 1.1 Xpert 40/1030 1.2 ByVision Bending control with 22 Inch Full HD display and touch technology 1.3 Dynamic drive system (DDS) with Energy Saver 1.4 Automatic tool protection 1.5 Dodpfoxtf A Iox Am Rjch Ergo foot switch 1.6 Rear protection sliding door electrically controlled 1.7 User manual (on CD) 1.8 Ambient air temperature 7°C up to 35°C 1.9 Voltage: 400/480 V, 50/60 cycles, 3 Ph (other parameters available on request)

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps Dedpfed N H A Nox Am Roch motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Dedpsfxpbmjfx Am Rjch

Condition: new, Fastech 3-roll round bending machine FRM 1250 x 90 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 3,0 mm max. sheet thickness 2,5 mm bending roll length 1250 mm roll diameter 90 mm smallest bending diameter 130mm weight 500 kg dimension L-W-H 1950 x 900 x 1130 mm Motor:1.1 KW Equipment: upper and lower roller electr. driven Dedpfx Aohzq Dqsm Rsch upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device Dedpfx Asxabkbom Rjch - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)