Used Microstep Msf Pro 4020 10Kw Fiber Mit Bohrspindel! for sale (14,092)

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) Ncodpfsh R Taqsx Aaaor - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard Nodpfx Aemhhy Neaaocr - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: used, In this offer you purchase a used booklet finisher "Canon Booklet Finisher W1 Pro" Object of sale: 1 x Canon Booklet Finisher W1 Pro suitable for various Canon models Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: Ncedpfst Hfhkox Aaaer You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: good (used), nominal power at 50% duty cycle: 10 kVA, – Capacity 10 kVA – Pneumatic Ncsdpfxoyvpkdj Aaajr – Adjustable power – Adjustable pressure – Tool – Documentation – 400V

Condition: like new (used), Year of construction: 2023, operating hours: 1,400 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, For sale: MicroStep WaterCut 2001.30W waterjet cutting machine in perfect condition, manufactured in 2023. The machine is equipped with a BFT Ecotron 40.37 high-pressure pump – 4000 bar and 37kW – one of the top-performing and most reliable pumps on the market. Key specifications: - Working area: 2000 x 3000 mm Nsdpfxey Ecr Ho Aaascr - Cutting head: 3-axis with anti-collision sensor - Total working hours: approx. 1400 h The machine is sold as a complete, ready-to-run package, including: - 1-ton abrasive feeder (Allfi) - Automatic sludge removal system (tank cleaning system) This configuration allows you to begin production immediately without additional investment. The machine is available for immediate delivery.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Ricoh Pro C5300s colour production system. Item for sale: 1 x Ricoh Pro C5300s with the following equipment: Includes Fiery Controller E-27B Includes LCIT RT5140 Includes Finisher SR5110 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 247,315 pages Colour: approx. 219,774 pages Black: approx. 27,541 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). Ncedpfx Aeymwlieaasr The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, MicroStep MG 18001.30 PraG Dimensions: 18,000 x 3,000 mm 1x plasma rotator: renewed in 2022 1x straight oxy-fuel torch Hypertherm HPR 260XD plasma source Excluding filter unit Ncodsytga Njpfx Aaaer

Condition: excellent (used), REF: MM6324  Sterling Pro Commercial Refrigeration blast chiller freezer. Can be used as a blast chiller or blast freezer. Very little use Model - SP40BC. Serial number - 7584 1526 2105 2606. Capacity - 10 x trays. Chilling capacity - 40 kg. Freezing capacity - 28 kg. Refrigerant - R290. Overall dimensions  Njdpfoydk Dyjx Aaascr - 800mm wide - 700mm deep - 1500mm high

Condition: used, Year of construction: 1995, functionality: fully functional, controller model: DNC 80, degree of automation: manual, Jonescheit Hytap 30 with DNC 80 – robust press brake featuring proven control system For sale is a Jonescheit Hytap 30 equipped with DNC 80 control. This is a robust and reliable press brake suitable for use in both workshop and production environments. The machine is designed for precise bending operations and stands out due to its solid construction and user-friendly operation via the DNC-80 control unit. It is an attractive solution for companies seeking a fully functional and immediately available press brake. Specifications: Manufacturer / Model: Jonescheit Hytap 30 Control: DNC 80 Year of manufacture: 1995 Type: manual Condition: used, fully functional Notes: Ncodpfx Ajyxakyjaaer The machine is sold without tooling. Inspection and test run on site are possible. Condition: Used and ready for operation. Conclusion: A solid press brake for operators seeking a field-proven machine with DNC control. Ideal for on-site inspection and functional testing.

Condition: good (used), MicroStep SPL-PA Plasma Cutting System with Extraction and Compressor Technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Machine type: CNC plasma cutting system CNC control: iMSNC Design: gantry construction with linear guides Extraction unit: Donaldson Torit DCE Electrical connection (extraction unit): 400 Volt Motor power (extraction unit): 7.5 kW Compressed air generation: screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE certification: available Ncedjyvd Uijpfx Aaaer Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm Ncsdpfjlkb Ezsx Aaasr - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each; additional 100 programs can be stored/loaded via FTP or a USB flash drive - 2 recirculating air fans - Double doors with safety door sensors - Over-temperature protection: Eurotherm 3216i - Control/recorder unit with color touch display - Robust steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating power: approx. 70 kW - Entry rails, recess for cart loading - Documentation, CE declaration of conformity - Electrical schematic with spare parts list We are happy to offer transport, installation, and staff training upon request. Also available as a new unit with exhaust fan and other equipment! Delivery time approx. 10–12 weeks. Please contact us! We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Inspection in our machine hall possible at any time by appointment. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heating cabinet, recirculating air oven, chamber furnace, heating up oven, chamber recirculation air oven, annealing oven, tempering oven.

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Cutting visualization on the monitor. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools. Ncodsy Ah Izopfx Aaajr

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 Ncjdpfx Aaoyxr T Tsajr With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. Ncedpfx Aasywcrweajr The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Condition: excellent (used), functionality: fully functional, mileage: 15,020 km, power: 134 kW (182.19 HP), first registration: 07/1993, fuel type: diesel, empty load weight: 7,520 kg, axle configuration: 4x4, wheelbase: 3,800 mm, next inspection (TÜV): 07/2026, fuel: diesel, gearing type: mechanical, suspension: steel, Year of construction: 1993, Top condition With TÜV Length for superstructure approx. 3.60 m 4x4 all-wheel drive Leaf spring suspension Austrian vehicle Ncjdpfxoyzrp Hj Aaajr Only 15,020 km original mileage Perfect for camper conversion

Condition: good (used), The scope of delivery includes: 01x End upright extension, used Shelving system: Bito Nsdoyfq Hwjpfx Aaaocr Type: PRO Material color: sendz. galvanized Frame profile: P5 Profile dimensions: 120 x 76 x 2.25 mm Grid perforation: 50|50 mm Height: 500 mm + extension bracket Depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is desired, additional costs will apply; these can be requested from us depending on the place of delivery and scope of supply.

Condition: good (used), Technical data for the extension brackets: Manufacturer: Bito Type: PRO Scope of delivery includes: 02x extension brackets, used Material color: Sendzimir galvanized Total height: approx. 295 mm Total width: approx. 85 mm For frame profiles: P6, P5, P4 Depth: approx. 40 mm Ncsdpfxoyfl R Ds Aaajr Material thickness: approx. 4.00 mm Weight per piece: approx. 2.02 kg Note: No fastening material included in the scope of delivery. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is additionally required, extra costs will apply, which can be quoted separately depending on delivery location and scope of delivery.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use - 380V, 5.5kW Ncodpsxdu Tqsfx Aaajr - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Bito Type: PRO Included in delivery are: 01x pallet rack traverse, used Nsdpfx Ajliky Noaaecr Material color: blue Type of truss: PT150M box profile: 150 x 50 mm agraffe: 5 HK (hooks) clear width: 3.300 mm max. load per truss pair 3.500 kg, with evenly distributed load 02x safety pins, used design: completely galvanized To secure the longitudinal beams Against unintentional lifting out

Condition: good (used), Technical data: Manufacturer: BITO Pro Version: left 24310 Included in delivery: 01x holder for push-through protection, used material color: sendzimir galvanized total width: approx. 93 mm total depth: approx. 93 mm opening dimension f. profiles: approx. 51 x 46 mm (HxW) material thickness: approx. 3,00 mm number of hooks: 2 hooks Njdpfsi El S Nex Aaaecr Grid spacing: approx. 50 mm Weight/pc.: 0.189 kg

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Nedcon Type: NS The scope of delivery includes: Ncedpjt Et T Sjfx Aaaor 01x pallet racking beam, used incl. inner support bracket f. Chipboard thickness up to: approx. 38 mm Material color: orange Box profile: 110 x 40 mm Agraffe: 4HK (hook) Clear width: approx. 3,000 mm 02x safety pins, used Version: completely galvanized For securing the side rails against unintentional lifting out General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel door, used Design: DIN - Right Material color: grey Total height: 2,210 mm Total width incl. frame: 750 mm Frame profile: RR 50x50 mm Total door height: 2,110 mm Total width door: 620 mm Door frame profile: RR 25x25 mm Njdpfx Aajtp Hkaoascr Mesh width: 105x22 mm Passage width: 645 mm Footplate dimensions: 140x50 mm Weight per unit: 25.76 kg Remark: Lever handle set and lock, as well as key are not included in the scope of delivery. Currently available from stock: 25 pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Note: This is a used steel locker. Slight damage (e.g., scratches, dents, dirt, or similar) may be present. The scope of delivery includes: 1x Steel locker with sloping roof, used Material color: gray Door color: gray Number of doors: 2 with ventilation grille Door handle: Turn-lock lock Overall width: approx. 610 mm Overall depth: approx. 500 mm Overall height: approx. 1,895 mm Weight: approx. 50.0 kg Locker compartment layout per door: Door handle: 1x Turn-lock lock Compartment dimensions: approx. 285 x 490 x 1,600 mm (W x D x H) Clothes rail: 1x | approx. 280 mm Hat base: approx. 285 x 307 x 400 mm (W x D x H) Ncedpfx Aaowaa D Aeaor Lockable with a padlock (Padlock not included) 1x Bench with shoe rack Dimensions: approx. 610 x 810 x 410 mm (W x D x H) Shoe rack dimensions: approx. 570 x 285 mm (W x D) Weight: approx. 15.0 kg Total dimensions: approx. 610 x 800 x 2,305 mm (W x D x H) Currently in stock: approx. 21 units. Your contact persons: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for pallet racking beam: Nsdpfex Hwl Rjx Aaascr Racking system: Bito Type: PRO Scope of delivery includes: 01x pallet racking beam, used Material colour: blue Beam type: PT170S Box profile: 170 x 50 mm Connector: 5 hooks (HK) Clear span: 3,600 mm Max. load per pair of beams: 4,000 kg, with evenly distributed load 02x safety pins, used Version: fully galvanized For securing the beams Against unintended lifting Note: The functionality of the beams is guaranteed despite the holes! The beams originate from a BITO project with heat shields that, according to the manufacturer, were bolted on! Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only offered for collection. Any transport or shipping beyond this can be arranged at additional costs, which can be quoted individually depending on place of delivery and scope of order.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the plug-in tube: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf cross beams Included in delivery: Njdpfx Aopbvgteaascr 01x plug-in tube, II. choice (new goods) Material color: galvanized Type: KRA 4170 Total length: approx. 170 mm Useful height: approx. 95 mm TubeØ: approx. 12 mm Weight / pc.: approx. 0,030 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.