Used Mahr Granite Plate for sale (12,754)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, STC-Ref:G-022-7715 Heidelberg Plattenabkante // Platebender, Year: 2008 equipped: - suitable for Heidelberg SM / CD - Plate bender Djdpezcuzyjfx Aa Hekt --> available: immediately, in stock

Condition: used, Year of construction: 1973, sheet width 3100 mm plate thickness 3 mm rear stop 1000 mm down holder 18 Stk cutting angle 0.5 - 1,0° 30° ° oil volume 150 l total power requirement 5,5 kW weight 4300 kg dimensions of the machine ca. 3800 x 1950 x 1600 mm Features: - Manual rear stop (front via handwheel) - Manual cutting angle adjustment - 1x front support arm - 1x side stop - Front finger guard - Operating instructions (English) Dodpfx Aajtzv T Ts Hjkt

Condition: used, The device is ready for use and was used in juice production as a cooler. Overall height: 1750 mm Overall width: 1700 mm Dkjdpjzy Ac Eefx Aa Hjt Plate size: 370 x 1330 mm No nameplate with parameters. Please check my other listings.

Condition: used, Year of construction: 1972, spindle diameter 100 mm x-travel 1400 mm dismantled ja tool adaptor SK 50 digital ja weight of the machine ca. 14 t Dkjdpfx Aezycrgsa Hot

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Complete polishing line for granite slabs still active and fully functional, viewable and equipped with: - automatic loading unit - motorized roller conveyors for automatic slab feeding - combined calibrating/polishing machine with high removal rate polishing spindles equipped with mechatronics for material calibration - equipment for drying by means of ventilation on both surfaces of the slabs - automatic waxing machine - automatic protective film applicator Djdpfjxdnbbjx Aa Hskt Available from next March 2026 .

Condition: good (used), Year of construction: 2017, Sahinler 4R HSS 20-280 Hydraulic 4-roll plate bending machine – Year 2017. Bending length 2050 mm Max. bending capacity - mild steel 20. Dksdpfxoxau D Io Aa Hjt Upper roll diameter 280 mm Lower roll diameter 280 mm Lateral roll diameter 220 mm Bending speed 1,5 / 5 m/min. Motor power 16 kW

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° Dodpfjzcqy Sjx Aa Hjkt cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: used, total length: 3,700 mm, total width: 1,600 mm, total height: 1,700 mm, Colour: Grey Weight: 4.500 kg - Documentation available: Yes - └ Type Documentation: Technical data, User manual - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 7.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3050 - Backgauge type: Electric - Backgauge depth [mm]: 750 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3700mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dedpfx Aoymbhzea Hekt Lukas van Rossum

Condition: excellent (used), Year of construction: 2015, Various Stainless Steel Conveyors & Packing Stations 1. Low level belt conveyor, Fully Stainless Steel, Belt Dimensions - 1000mm L x 400mm W, Height adjustable feet, Complete with motor. gearbox Stop / Start Isolator, Box alignment side guide 2. Incline Belt Conveyor, Stainless Steel Frame, Belt Dimensions 2500mm L x 400mm W. Infeed height 500mm, Outfeed height 1350mm 3. High Level Box Collation Conveyor, Gravity Roller Conveyor for Box Collation, Dimensions 2500mm L x 400mm W x 1400mm H, Height adjustable legs / feet 4. Packing Station Conveyor, All stainless steel, Two Packing tables - dimensions 760mm L x 400mm W each, Conveyor dimensions - 2000mm L x 400mm W, Height adjustable feet, Adjustable box aligner / guide 5. Driven Roller Conveyor Stainless Steel, Dimensions - 2200mm L x 400mm W rollers, With top box closer adjustable plate, 2200mm L, Fully stainless steel, Complete with motor, gearbox, Stop / Start Isolator. Dkjdpfxetqdq Ss Aa Het 6. Gravity Roller Flexi Conveyor, Closed Dimensions 960mm L x 300mm W, Fully open 3200mm L, Height adjustable legs 7. Stainless steel conveyor with a food grade flat belt, 4000mm L x 350mm wide belt 8. More conveyors - call us for details

Condition: excellent (used), MECOF AGILE CS 500 TNC 640 Boring Mill in technically flawless condition Technical Data: - Spindle taper: ISO 50 - Longitudinal travel: 6000 mm - Cross travel: 1250 mm - Vertical travel: 1700 mm - Table size: 7300×1090 + (2 CUBI 1520×1000) mm - Spindle speed: 4000 rpm - CNC model: fidia CXR - Tool changer capacity: PICK UP UTENSILI 10 POSITIONS (5 ISO 50 – 5 HSK 50 E) - Power: 30 kW spindle The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet the most diverse requirements. With a longitudinal travel of 6000 mm and a cross travel of 1250 mm, it enables precise drilling and milling operations on large workpieces. The 1700 mm vertical travel ensures maximum flexibility and allows for machining at various angles. The table has a size of 7300×1090 mm and is supplemented by two additional cubes measuring 1520×1000 mm each. In this case, the machine has been installed at floor level. The boring mill is equipped with a powerful 30 kW spindle motor with a maximum spindle speed of 4000 rpm. The fidia CXR CNC control provides precise programming and easy operation. The tool changer with 10 positions (5 ISO 50 – 5 HSK 50 E) allows for fast tool changes to optimize your production process. The machine has been regularly serviced and is in technically excellent condition. It can be inspected under power or during ongoing production. Djdey Rzkljpfx Aa Hskt Extensive accessories included. Additional pictures available. Dismantling, removal, shipping, and reinstallation can be organized upon request.

Condition: used, Year of construction: 1981, total length: 3,750 mm, total width: 2,250 mm, total height: 1,700 mm, Colour: Grey Weight: 5.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: B5896 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge type: Electric Dkedpeyf Hhwefx Aa Hjt - Backgauge depth [mm]: 1100 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Manual - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3750mm x 2250mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1990, plate thickness 5 mm cutting length 3000 mm Dksdpfxeztf Azs Aa Het rear stop 750 mm total power requirement 7,5-10 kW weight of the machine ca. 4 t

Condition: like new (used), functionality: fully functional, 2x 2.92m2 Plate Heat Exchanger and Miscellaneous Spares (Unused) 1x plate type condensate blowdown cooler, surface 2.9M2 SA-516 GR.70N material 13 barg design pressure -20 / 150 deg c design pressure 12 plates E1958 Tag 1x plate type process steam condensate cooler, surface 2.9M2 SA-516 GR.70N material 14 barg design pressure -20 / 150 deg c design pressure 12 plates Dsdpfezwx Tnsx Aa Hskt E2901 Tag 2x tightening bar E1958 SL002, E2901 SL002 Part No 10x gasket EPDM E1958 SL001, E2901 SL001 Part No 2x startup & commissioning spares E1958-1, E2901-1 Part No

Condition: as good as new (ex-display), Year of construction: 2021, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, lighting, AIM coordinate measuring centers are the technical successors to the Mahr multisensor coordinate measuring machines currently in use worldwide. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Weight: approx. 1,200 kg Maximum workpiece weight: approx. 40 kg on the glass plate Accuracy: U1 = 1.9 + L/200 U2 = 2.4 + L/150 U3 = 2.9 + L/100 (L = measuring length in mm) Increased accuracy available on request Traverse speed: 200 mm/s Acceleration: 400 mm/s Scale resolution: 0.0001 mm Multisensor sensor unit (MSH) optical/tactile/laser - including high-precision USB camera with 2-stage zoom and telecentric beam path - including PTL01 TTL point laser, high-precision, telecentrically coupled - including Renishaw TP200 integrated tactile probe system, optionally expandable - including Quad-Light LED power ring light, programmable illumination - including LED power transmitted light - including Nikon precision objective 5x (optional 3x, 10x, 20x, 50x) C-mount Technology - including calibration standard with factory calibration certificate, consisting of a glass plate "circle", calibration sphere and gauge ring Transfer - state-of-the-art PT200 CNC controller system in a robust, industrial-grade control cabinet - PCI-BUS system for fast internal data transfer in real-time operation - pull-out controller rack 19" for optimal access in the event of service - modular controller concept open for later upgrades and retrofits - service-optimized controller design for quick access and service times - integrated 64-bit broadband bus technology with real-time data transfer Dedog Ewk Rjpfx Aa Hekt - 4-channel online temperature compensation preparation "on board" - active safety technology for drives, light management and sensors - online remote connection for remote maintenance and online system check - LS circuit breakers for quick fault finding in the event of service - firmware adaptation for volumetric 3D full error compensation Including the powerful OptiCheck3D 5.0 software Commissioning, training and start-up support (programming) can be booked as a special package!

Condition: excellent (used), functionality: fully functional, total width: 800 mm, total length: 1,200 mm, table height: 860 mm, plate height: 160 mm, For sale is a used measuring table in very good condition. The stone plate is undamaged and in very good condition. Dodpfx Aaezuxt Ne Hokt Plate dimensions: Length: 1200mm Width: 800mm Height: 160mm Height from the floor to the top edge of the plate: 860mm Center height: 200mm Flatness: DIN 876, accuracy class: 1

Condition: used, Year of construction: 1999, Measuring machine, coordinate measuring machine, form tester -Handover: in current condition as viewed Dkodpfx Ajua Nl Eoa Het -Calculator missing, x-axis damaged (Carriage guide defective) -Manufacturer:Mahr, form tester type MMQ 40 -Measuring height: 490 mm -Technical data: see photos documentation -Accessories: incl. calibration and measuring accessories / technical documentation, see photos -Dimensions: 700/450/H900 mm -Total weight: 218 kg

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system "SP 9" * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard Dkjdpfjzr Rqnsx Aa Hot - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF) Dkjdpfx Aaeznngxo Hst

Condition: used, Year of construction: 2005, functionality: unexamined, machine/vehicle number: 116831, input voltage: 230 V, type of input current: AC, plate width: 850 mm, plate length: 1,050 mm, input frequency: 50 Hz, For sale is a Glunz & Jensen Unigraph Quartz Stacker Mk III 85/105 SP for the automatic transport and stacking of CTP/offset printing plates. Dedpfozxf Dpjx Aa Hjkt Technical specifications: Manufacturer: Glunz & Jensen Model: Stacker Mk III 85/105 SP Machine type: PS 85/100 SP Year of manufacture: 01/2005 Power supply: 100/115/200/230 V Frequency: 50/60 Hz Single-phase Conveyor belts/round belts Tilting/stacking unit Sensor control Speed control for conveyor and tilting unit Condition: Used, well-maintained condition. Optical condition and scope of delivery can be seen in the original images.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, total length: 495 mm, total height: 520 mm, total width: 457 mm, construction height: 300 mm, construction width: 240 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Build volume X-axis: 330 mm Build volume Y-axis: 240 mm Build volume Z-axis: 300 mm Filament diameter: 2.85 mm Nozzle diameter: 0.25 mm, 0.4 mm, 0.8 mm Printing speed: < 24 mm³/s XYZ resolution: 6.9 / 6.9 / 2.5 µm Layer resolution with 0.25 mm nozzle: 60–150 µm Layer resolution with 0.4 mm nozzle: 20–200 µm Layer resolution with 0.8 mm nozzle: 20–600 µm MACHINE DETAILS Technology: Fused Filament Fabrication (FFF) Print head: Dual extrusion print head with automatic nozzle lift system and interchangeable print cores Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway Operating temperature: 15–32 °C Relative humidity during operation: 10–90 % RH, non-condensing Non-operating temperature: 0–32 °C Supplied software: UltiMaker Cura, Cura Connect Supported operating systems: macOS, Windows, Linux Plugin integration: SolidWorks, Siemens NX Supported file types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, UFP Connectivity: WLAN, LAN, USB Display: 4.7 inch (11.9 cm) color touchscreen Monitoring: Live camera Operating noise: 50 dBA Build plate temperature: 20–140 °C Build plate leveling: Active leveling Nozzle temperature: 180–280 °C Nozzle preheating time: < 2 min Build plate preheating time: < 4 min from 20 °C to 60 °C Power consumption: 500 W Dimensions & Weight Machine dimensions: 495 × 457 × 520 mm Machine dimensions with Bowden tubes and spool holder: 495 × 585 × 780 mm Net weight: 20.6 kg Shipping weight: 29 kg Shipping carton dimensions: 650 × 600 × 700 mm FEATURES Dual extrusion print head Automatic nozzle lift system Interchangeable print cores Heated glass build plate Heated aluminum build plate PEI build plate Active build plate leveling Abrasion-resistant dual-gear feeder NFC scanner for material recognition Color touchscreen Live camera Spool holder with material guide Dsdpjzx S D Aefx Aa Hjkt Print Core AA 0.4 mm, 2 pieces Print Core BB 0.4 mm, 1 piece Nozzle cover, 3 pieces Power cable User manual CE marking

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek down holder 14 Stück work height max. 840 mm Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure Dedpfx Aexab Ruea Hjkt - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Used 3-meter CNC plate shear from ERMAK Dkodpozzpfcjfx Aa Hst Type: CNC HVR 3106 Cybelec DNC 60 control system Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Electric cutting clearance adjustment Year of manufacture: 2012

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL) Dedpfszkvx Usx Aa Hskt

Year of construction: 1999, condition: good (used), functionality: fully functional, Plate turner, maximum dimensions 3200 x 1000 mm. Functional between two through-feed drilling machines. Has not been used extensively. Dkedpsza U Ibefx Aa Hst

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, *Description:* For sale: motorized 3-roller rolling machine *SAY-MAK SRM 1550 x 90* *Technical specifications:* - *Year*: 2019 - Serial number: 59860 - *Capacity*: 2mm steel / 1.5mm stainless steel, with a width of 1550mm - *Minimum diameter*: 90mm - *Motorized*: Yes, with forward/reverse foot pedal - *Controls*: Control box with emergency stop + digital display - *Weight*: 580kg - *Voltage*: 380V, three-phase Dkodpfxjzr Rdue Aa Hot - *Condition*: Very good condition, well-maintained 2019 machine Perfect machine for sheet metal work, ventilation, and metal fabrication. Reputable Turkish brand, spare parts available.