Used Loewer Löwer Ks 225 Edge Sander for sale (13,316)

Year of construction: 1988, condition: used, Automatic edge gilding machine Ochsner GA Year: 1988 Description: Isdpfxezqt Efs Aatsif Grinding stations Regulation of grindings Brush with exhaust Priming station Gilding station Electric steering and controlling desk

Condition: excellent (used), Spako Cooking Vessel Capacity 225 litres Thermal Oil Jacketed up to 150 degrees centigrade Scrape mix arm Ijdpfx Aaey Tnmrjtsif Tap discharge New Process controller fitted Two new elements fitted New insulation fitted

Condition: used, Year of construction: 1994, Belt height: 150 mm Belt length: 2280 to 2290 mm Belt speed: 22 m/s Two-sided sanding with oscillation Drive mechanism Veneer sanding mechanism End-face sanding / radius sanding with a small support table Iedezd Hngspfx Aatsif Surface sanding with a tilting table Belt direction: right/left Location: Nattheim

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment: Base machine Additional cost for radius milling cutter unit with blowing device + extraction system Additional cost for surface milling cutter unit Isdpfszttnfex Aatjif Additional cost for diamond tools, height = 55 mm, for jointing unit EVA/PUR glue tank with drain function instead of standard glue tank Collection table / pipe bridge Pre-carriage Location: Flörsheim Availability: Immediate

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finishing sander Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of painted surfaces. Edgebanding machine with combination unit and electronic segmented pressure beam, edge segments can be switched on and off. Segment width of the pressure beam 35mm Contact roller pneumatically adjustable, low wear due to corrugated steel roller Grain equalization Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed steplessly adjustable via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the outlet Constant working height 900mm by adjusting the top part of the machine, thus also integrable in sanding lines Feed belt still has good grip and is in very good condition Maximum sanding width approx. 1340mm Workpiece height approx. 3 to 150mm Common sanding belt dimension 1360 x 1900mm 3 rubber-coated pressure rollers Infeed roller table and foldable outlet table Preparation for vacuum blower. The belt is perforated and connectors for an optional blower are available. Alternatively, the belt can also be connected to the dust extraction system. Dust extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: belt speed, feed speed, workpiece height, pressure beam insertion points front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE marking Iisdpfx Aajzqvmrotjf Operating manual Without the connection cable shown Original paint, only touched up in places Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Iedpfx Aoy Ay Akoatsif Feed speed stufenlos 8 - 12 m/min. total power requirement 15 kw Dimensions (L/W/H) 4.290 x 840 x 1.690 mm

Condition: used, For profiling and edge-milling windows, doors, individual components and similar items with all-round profiles Units: Ijdpfjztv Dpox Aatjif Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device - 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Condition: used, total height: 2,000 mm, total length: 8,400 mm, total width: 1,080 mm, Colour: Grey Weight: 3.500 kg Price: On request - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/335516 - Number of units [pcs]: 12 - └ 1st unit type: Spraying device - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 68 - Fuse [A]: 68 - Transport dimensions: 8400mm x 1080mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Isdpfx Asyudwzoatjif Yorick Diebels

Condition: good (used), Year of construction: 1989, functionality: fully functional, For sale is an OTT Alpha wide belt sanding machine in a robust industrial design. This machine is ideally suited for calibrating and fine sanding solid wood, veneer, MDF, chipboard, and other wood-based materials. The proven OTT technology impresses with its stable construction and reliable sanding results. Manufacturer: OTT Type: Alpha 110 Wide belt sanding machine Calibrating and fine sanding machine Robust industrial design Dimensions in mm: 1860W x 1970D x 2100H 1100mm working width Max. workpiece thickness 1600, min. 3mm Sanding belt 2150 x 1120mm 4 + 8 m/min feed rate 11 kW motor 10 liters/min Weight: 2500kg Feed belt with rubber pad Sanding unit with wide belt Pneumatic belt tensioning Pneumatic sanding shoe control Control panel with clear machine control Ammeter for load monitoring Pressure gauges for pneumatics Emergency stop switch Large maintenance doors for easy service access Integrated dust extraction connections Solid machine construction for low-vibration operation Iijdpfxjzrnlvj Aatof Ideally suited for: Carpentry shops Joinery shops Furniture manufacturing Interior finishing Door and window manufacturing Series and single-piece production Condition The machine is in used condition with age-related signs of wear. It comes from a carpentry shop and impresses with its robust industrial quality. Inspection and trial run are possible at any time by appointment. Transportation is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, intermediate sales and changes reserved. All information without guarantee.

Condition: used, Year of construction: 2022, Traction battery Battery voltage: 24V Battery Ah: 225Ah Iijdpfxjzt Dq Rj Aatjf Battery manufacturer: AIM ACCUMULATOREN Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: German AIM Accumulatoren traction battery 24 V / 225 Ah No.: not specified Type: PB 24V / 3 PzB 225 Year of manufacture: 2022 Manufacturer: AIM Accumulatoren Battery type: PzB Voltage: 24 V Capacity: 225 Ah Energy: 5.1 kWh Production date: week 40 / 2022 Tray type: 20015-01 Electrolyte volume: 21 l The battery has been refurbished and subsequently tested. During the test, an operating time of approximately 3 hours and 30 minutes was achieved. Actual operating time may vary depending on the vehicle, load, driving style and operating conditions. The battery is available immediately. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the battery. A detailed description of its condition and further information is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right battery, please contact us. We have a selection of additional batteries and equipment available on site. English AIM Accumulatoren Traction Battery 24 V / 225 Ah No.: not specified Type: PB 24V / 3 PzB 225 Year of manufacture: 2022 Manufacturer: AIM Accumulatoren Battery type: PzB Voltage: 24 V Capacity: 225 Ah Energy: 5.1 kWh Production date: week 40 / 2022 Tray type: 20015-01 Electrolyte volume: 21 l The battery has been refurbished and subsequently tested. During the test, an operating time of approximately 3 hours and 30 minutes was achieved. Actual operating time may vary depending on the vehicle, load, driving style and operating conditions. The battery is available immediately. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the battery. A detailed description of its condition and further information is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right battery, please contact us. We have a selection of additional batteries and equipment available on site.

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Belt width: 1370 mm Belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed rate: 2.5 - 13 m/min (infinitely adjustable) Belt blowing system Dust brush Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Location: Nattheim Iiodpfx Aaoytrfketof

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Iisdpfxjy Ruzqe Aatof

Condition: new, Year of construction: 2025, DM1100 Z – NEW DESIGN – priced at €29,800.00 Deburring up to 1100 mm in width. The DM1100 Z refines and deburrs aluminum sheets cut by laser, punching, or shearing. This machine features a single wide-belt station that can be used to deburr parts with a size of 50×50 mm and a width of up to 1100 mm. The DM1100 Z is also suitable for surface finishing and can be operated with both standard abrasive paper and non-woven/scouring belts. Iiodsimdmtopfx Aatof Using an optional extension table, the new DM1100 Z can be combined with an existing DM1100 C edge-rounding machine. We also offer a parts return system for this machine.

Condition: excellent (used), Year of construction: 2011, For the complete technical description, please download the PDF document or request it directly. Used laser/PU edge banding machine for batch size 1 Manufacturer: Homag / Bargstedt Year of manufacture: 2011 Consisting of: Homag edge banding machine Power KFL610/21/PU/L/25/SI14 Iodpfxozt N Egs Aateif - Infeed system SI14 - Outfeed conveyor TF 11 Bargstedt gantry system Profi TBP410/40/28/12/S Bargstedt belt conveyor TFB100/021/12 Bargstedt roller conveyor TFR560/S/_/28/31/12 Bargstedt timing belt conveyor TFZ531/40/25 Bargstedt belt conveyor TFB100/041/12 Bargstedt gantry system Profi TBP410/40/28/12/S Bargstedt timing belt conveyor TFZ531/40/25 Bargstedt belt conveyor TFB100/041/12 Bargstedt chain lift buffer TPK400/30/12 Bargstedt belt conveyor TFB100/041/12 Bargstedt belt conveyor TFB100/031/12

Condition: excellent (used), Year of construction: 2019, Wide-belt sanding machine Manufacturer: Houfek Type: SPB 910 Buldog 5 Year of manufacture: 2019 Sanding width: 910 mm Sanding belt: 2,200 x 1,010 mm Workpiece thickness: 3 - 160 mm Sanding motor power: 11 kW Iisdpfxeztrk Se Aatjf Feed rate: 4.5 / 9 m/min Feed motor power: 0.55 / 0.75 kW Sanding belt speed: 18.5 m/sec Weight: 1,210 kg

Condition: excellent (used), Year of construction: 2003, For calibration of solid wood/hard wood In line machine ( Fixed table hight : 900 mm ) Max working width : 52 - 1350 mm Min working lenght : 400 mm Working hight : 4 - 170 mm ( Digital motorized up/down ) Infeed speed : 3 - 18 mtr/min Configuration : 1 agg : Steel Roller/drum, 45 Kw 2 agg : Rubber roller/drum, 37 Kw (schore 85 ) 3 agg : Brush Extra new steel roller/drum + extra new rubber roller/drum included ( see pictures attached ) Extra 15 package of sanding paper included( brand new ) Ijdpfx Aaezuvy Hetoif

Condition: used, Kündig ENORM 1300-2 wide-belt sander for the precise calibration and fine sanding of solid wood, veneer and wood-based materials. This robust industrial model, featuring two sanding units and a cleaning brush, delivers high material removal rates and precise surface quality in the furniture and interior fit-out sectors. Ideal for craft and industrial businesses with high quality standards, including a set of sanding belts. Technical data: - Working width: approx. 1,300 mm - Grinding units: 2 - Clearance height: max. approx. 150 mm - Motor power: 18.5 & 15 kW Iodpfx Aaezryxnetjif

Condition: used, Wegoma Type 2400 edge sander for the precise sanding of straight and curved wooden edges. Its robust construction and powerful motor ensure a consistent finish with high material removal rates. Ideal for joinery, furniture making and interior fit-out. Technical data: - Sanding belt length: 2,400 mm - Sanding belt width: 150 mm - Table: Swivels 90° - Motor power: 1.85 kW Ijdpszryyfsfx Aatjif

Condition: used, Long-belt grinding machine JOHANNSEN T 85. Iiodpezryx Uofx Aatjf

Condition: used, Jet EHVS-80 cs lightweight edge sander for the precise sanding of straight and curved wooden edges. Its lightweight construction and powerful motor ensure a uniform finish with high material removal rates. Ideal for small joinery workshops, furniture making and interior fit-outs. Technical data: - Sanding belt length: 2260 mm - Sanding belt width: 150 mm - Table: Swivelling - Motor power: 1.5 kW - Extraction connection: 100 mm Iodpfszryxhsx Aatoif

Condition: used, Technical data: Isdpfx Aaozryw Rjtjif - Conveyor belt width: 150 mm - Motor: 3 kW - Weight: 490 kg

Condition: used, Technical data: - Grinding length: approx. 2,780 mm - Grinding width: approx. 950 mm - Motor: 6 kW Iodpfxszryw Do Aatjif

Condition: used, Built in 1998 Iisdpjzrxlgjfx Aatjf CNC motor-controlled Technical data: - Quantity: 2

Condition: used, Kölle KS40 table saw for precise rip, cross and format cuts in solid timber, panel materials and timber profiles. The robust, heavy-duty machine construction, featuring a swivelling saw unit, scoring unit and Wegoma Type VS48K feed mechanism, is particularly suitable for joinery workshops, carpentry workshops and versatile workshop use. Technical data: - Cutting width: ~ 850 mm - Motor: 7.5 kW Ijdpfjzrxbnjx Aatjif - Swivelling: 45°

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication Iiodpfx Aajzt Twtetef GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach