Wide-belt sander

NS Maquinas DM1100 Z ab € 29.800,--

Condition: good (used), Year of construction: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled X/Z axes TECHNICAL DATA Turning Length: 540 mm Spindle: Motorized spindle 11/16 kW Tool holder: VDI30 with 12 AC motors - Speed: 5,000 rpm - Spindle Nose: A2-6" main spindle - Drive Power (100/40% duty cycle) 11/16.5 kW Turret: 12-station Fsdpfxew Hxi Dj Afnjpc - Driven: 12 stations - Tool holder: VDI 30 EQUIPMENT FEATURES + Technology cycle for applying alternating speed for vibration-critical setups + Direct X-axis position measuring system + Programmable positioning and Pressure force. + Ergonomic DMG MORl SLIMline® control panel + Hollow clamping device, max. bar capacity D65 mm + Tailstock, hydraulically movable via M-function + External electronic handwheel + Chip disposal package: + Chip conveyor with right-side discharge instead of the chip tank + 4-color signal lamp + Differential pressure clamping for the main spindle + Foot control pedal for tailstock + Automatic NC tailstock: Maximum machining flexibility - full force control in the range of 0.7 - 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measuring device in the work area, made by MARPOSS + Mechanical oil mist separator type AFS 600 Subject to changes and errors in technical data and information.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Fedpfx Ajur Hfzsfnepc

Condition: good (used), Year of construction: 2019, CNC Turning and Milling Center Machine type: Spinner TC 800 - 85 MCY Control: Siemens 840 D Shopturn Year of manufacture: 2019 Available from: immediately TECHNICAL DATA: Max. turning length: 900 mm Turning diameter: 500 mm Spindle speed range: 2,600 – 4,000 rpm C-axis Bar capacity: 85 mm Tailstock Travel: X-axis: 360 mm Y-axis: -55 / +65 +/- mm Z-axis: 900 mm Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: BMT 65 Fpjdpfx Aexdc Sujfnsc Equipment: Chip conveyor Electronic handwheel

Condition: used, Article: clamping head Manufacturer: Different Fpjdpfx Afjn H Nzuenoc For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2025, condition: new, - soft start / stop - pre-stretch tension - additional engine - height 2.1 m - ramp / platform - platform diameter 1.65 m - film stretch up to 350% - Strong chain drive - man-hour and pallet counter - regulation of wrapping speed 3-12 rpm - the ability to adapt the device according to the customer's needs - 230V power supply Fpedpfx Afemuzutjnsc - Automatic return to the starting position ADDITIONAL FEATURES: - Very easy to use - Operating hours counter - Pallet counter - Cycle pause function - Stretching on the head modes and not on the palette - Adjustable wrapping speeds Pallet wrappers are designed for machine wrapping of goods stored on pallets with stretch foil. They are especially recommended where very high efficiency and low labor and financial costs in the packaging process are required, i.e. in distribution centers, warehouses, logistics centers, production plants, as well as in smaller companies. – increasing the efficiency of the packaging process – the ability to set the required parameters by machine and the high rotational speed of the wrapping plate makes machine wrapping much shorter than manual wrapping, and the employee during foiling can be involved in other activities, e.g. preparing or delivering another pallet, – repeatability of packaging – wrapping with a wrapper allows you to maintain an identical method of packaging for a specific type of cargo, repeatability of a once developed and appropriate method of packaging allows for safe storage and transport of goods, – load stability – the wrapper, thanks to the adjustment, allows you to adjust the wrapping method even to very diverse loads in a reliable way and guarantees the stability of the load on the pallet, which guarantees avoiding possible damage to the load.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) Fpodpfxel Dw D Eo Afnoc - Weight: 3560 kg

Condition: good (used), Year of construction: 2003, Manufacturer: KUKA Type: KR 210 L 180 Year of manufacture: 2003 Fjdpeh Dw Dqofx Afnjpc Maximum load capacity: 150 kg

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Fpsdpfxed Ev Upj Afnsc Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Fpodod Ixadepfx Afnoc Weight (kg) 5000

Year of construction: 1999, condition: used, pulling force - max. 6,0 t max. ram stroke 1250 mm dimensions of the machine ca. 1,20 x 1,20 x 3,25 m Fedpfx Afsd Il A Nenepc