Used Leuco Hm 166726 for sale (1,710)

Condition: new, Year of construction: 2021, Pick and place robot Model: KUKA 3 D1200 HM/SEL Year of production: 2021 Payload: 3 kg Reach: 1200 mm Control: KR C5 KSP Price for single robot: 1̶5̶.̶3̶0̶0 / 9,600€/pc. Blodpfxot Ah Ewe Akaog Price for robot in cell: 11,700€/pc.

Condition: used, Year of construction: 1996, Used machine Year of construction: 1996 with heated infeed rail Gluing station with electronic temperature control and synchronized and counter-rotation function - Snipping unit - Trimming unit - Profile scraper Blsdpekwg Tbofx Akajg - Cleaning station - Edge thickness 0.4 - 5 mm - Panel thickness up to 50 mm - Part length min. 150 mm - Part width min. 60 mm - Workpiece thickness 8 - 50 mm - Feed rate 12 m/min L x W x H approx. 4000 x 1260 x 1600 mm (width can be reduced to 800 mm for shipping by by removing the removable support) Availability: by arrangement Storage location: Hochheim

Condition: used, Year of construction: 1998, sheet width:130 mm coil weight:0,150 t Bodjh Ra I Tjpfx Akaelg coil internal dia.:300 mm coil external diameter:1000 mm dimensions of the machine ca.:0,75 x 1,50 x 1,70 m volt:230 V total power requirement:0,25 kW weight of the machine ca.:0,3 t Motor-driven Decoiler with mechanical central expansion, stepless coil speed, tip switch, emergency cut-off.

Condition: used, Year of construction: 1988, sheet width 150 mm coil weight t coil internal dia. mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Bljdpfx Akor Eth Deajg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133477-100, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 1,735 bar, injection weight: 183 g, mold height (min.): 250 mm, ejector stroke: 140 mm, opening stroke: 500 mm, plate length: 670 mm, plate width: 670 mm, total length: 4,500 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 4,500 kg, heating capacity: 11.4 kW (15.50 HP), pressure: 275 bar, pump power: 18,500 W, power: 38 kW (51.67 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 80 A, Model: HM 110/350 UNILOG B6E Machine No.: 133477-100 Year of construction: 2011 Weight: 4500 kg Hydraulic system pressure: 275 bar Wiring diagram No.: HMB6E133477-100 Bodpsyw Udxofx Akaolg Largest motor FLA: 33.4 A Control voltage: 24 V DC Electrical: 400 V, 80 A

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 131703-100, clamping force: 1,500 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1,866 bar, injection weight: 358 g, mold height (min.): 250 mm, ejector stroke: 160 mm, opening stroke: 600 mm, plate length: 740 mm, plate width: 740 mm, total length: 5,100 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,100 kg, heating capacity: 13.9 kW (18.90 HP), pressure: 210 bar, pump power: 22,000 W, power: 48 kW (65.26 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 88 A, Type: Hydraulic Injection Molding Machine Model: HM 150/525 Bjdpfxeyw Ucho Akajlg Max. Motor Rated Current(Largest MTR FLA): 40 A Control Voltage: 24 V DC Rated Voltage: 400 V (3-phase) Rated current: 88 A Max. fuse rating: 100 A Frequency: 50 Hz Short-circuit rating(SCCR): 6 kA Year of construction: 2010 Weight: 6100kg Control system: Intergrated Battenfeld control with touch-screen panel Manufacturer: Wittmann Battenfeld

Condition: used, Year of construction: 1994, Used Case Erector Ape 1994 Bljdpfx Akevgupujaeg The Used Case Erector Ape 1994 is a machine manufactured by APE Impianti. Its model number is Form 1200 HM and it was made in 1994. Currently, it is in storage. The machine has safety features and comes with manuals.

Condition: used, Year of construction: 1997, Used Case Erector Ape 1997 Bodpfsvgumaex Akaelg Case Erector with hot glue closure under part model form 2000 hm-sx manufacturer APE. Nordson glue heater Possibility of forming and closing various carton formats Painted iron frame with stainless steel panels Accident prevention protections Production about 2,000 cartons per hour The machine is in accordance with CE year 1997 with manuals Used until December 2021 see video

Condition: used, Year of construction: 2012, Used Hot Melt Labeling Machine Kosme 20000 bph The velocity of this machine reaches max 20,000 bottles per hour (BPH). Kosme works primarily with PET containers, a material extensively used in the beverage industry. The 16 plates have a movement controlled by a mechanical cam system with brake and clutch. This system ensures precision during labeling operations. The single labeling station operates in a clockwise rotation direction. Type of hot melt system: Bledpfxovguc Ij Akaeg From the label application perspective, the labeler uses a hot glue method. This method, although traditional, provides durable adhesion between the label and the container. The Kosme labeler has an Adjustment system related to the different labels manual but has the head adjustments through an electrical system. Technical specification of the Used Hot Melt Labeling Machine Kosme 20000 BPH: Other technical specifics include the working diameter, set at 720, with a bottle diameter format of 78 mm, ideal for labeling round bottles. The double auger at the input is a feature that points to the efficiency of the bottle-feeding system. Despite its production year, the machine is currently in storage, suggesting limited use or optimal conservation. Its total weight is 2500 kg, and, from an electrical standpoint, it operates at 400V, with a power of 9kW and a frequency of 50Hz. The Kosme labeler has the necessary safety features; it is in compliance with current regulations. The usage and maintenance manuals are available, providing further operational details and maintenance techniques. In summary, with its technical specifications and operational features, the Kosme 20000 BPH hot melt labeler represents an important asset for those operating in the bottling industry and in need of reliable and precise solutions. Technical assistance: We can give technical assistance for installing and running this equipment, an offer can be released upon request.

Year of construction: 2024, condition: new, IMPORTANT: MACHINE WILL BE BRAND NEW All electric-electronic components used are Schneider and Siemens Brands. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. The cylinder rods, especially “hard chrome plated” for resistance against any damage, are induction hardened to maintain maximum strength. The “Off-The-Shelf” equipment used in the electric and hydraulic systems are from reputable worldwide brands and comply with the CE European standards. The body of the machine is constructed from “DIN St52” material. After welding they are stress-relieved and sandblasted before painting. SEE THE TECHNICAL DESCRIPTION BELOW Electric Motors: 11 kW Bodjgv Ix Iopfx Akajlg Machine Weight: appx 2.700 kg Cutting Speed: 5 cuts/min Blade Length: 620 mm Max. Working Pressure: 250 bars Cutting Force: 150 tons Machine Dimensions (Width x Length x Height): 750 mm x 2.500 mm x 1.300 mm

Condition: excellent (used), Year of construction: 2011, operating hours: 85,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, column diameter: 105 mm, injection pressure: 1,555 bar, mold height (min.): 350 mm, ejector force: 59 N, ejector stroke: 200 mm, opening stroke: 800 mm, heating capacity: 31.3 kW (42.56 HP), Equipment: USB port, documentation/manual, OPPORTUNITY Press ready for use, in very good condition, Euromap 67, 4 hydraulic cylinders, hot runner system for the mold with 12 zones included. All details are visible in the photos. Bljdpfeww D Rnex Akajg

Condition: good (used), Year of construction: 1995, functionality: fully functional, WORKING DIMENSIONS: Bedpfjx S E Hajx Akajlg 400x250 mm 4 SIDES + EDGE BEVELERS

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Bodpfx Akopy Dxrjaolg Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: good (used), Year of construction: 2002, operating hours: 77,288 h, functionality: fully functional, machine/vehicle number: 26406, clamping force: 250 kN, injection weight: 64 g, We are selling a Battenfeld 250/130 machine, year 2002. Clamping force: 25 tons, shot weight: 64 g. For any further information, please feel free to contact us. Bljdpfxjya Ev Aj Akaeg

Condition: excellent (used), Year of construction: 2003, Battenfeld HM 1300/350 YEAR 2003 Wear power 130 TO Scrow 40mm Stroke volume 220 cm Holmen far 52 x 47 Blsdedv Tbfopfx Akaog Betreibsstunden ca 79800 h

Condition: excellent (used), Year of construction: 2003, Battenfeld HM1300/350 Year of manufacture: 2003 Clamping force: 130 t Blodpsxwmx Sjfx Akaog Screw diameter: 40 mm Operating hours: 77,890 h Tie bar spacing: 42x42 cm

Condition: used, Used AMIXON model HM 400 stainless steel vertical twin-shaft ribbon mixer. Manufacturer: AMIXON (Ruberg Mischtechnik KG) Model: HM 400 Gross volume: 530 litre (approximately) Working volume: 400 litre (approximately) Type of agitators: Twin shaft ribbons + side chopper Drive of agitators: 7/9 kW, 380 V, 970/1475 rpm (driven through gearbox) Drive of chopper: 5.5 kW, 380 V, 1475 rpm Bjdpfx Akowr Dhcoaslg Includes: side inspection doors with dimensions 640 x 550 mm, control panel, hopper

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 291257-100, MACHINE DETAILS Net weight: 23,500 kg / 8,500 kg Hydraulics – Operating pressure: 231 bar Blsdpfxjxyizhe Akaog Electrical data Motor rated current: 109 A Control voltage: 230 V Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 3500 /1900 Injection Moulding Machine Year: 2005 Clamping Unit: Clamping force: 3,500 kN Platen dimensions (H x V): 1,100 mm x 1,060 mm Tie bar distance (H x V): 800 mm x 710 mm Mould opening stroke: 670 mm Minimum mould height: 375 mm Maximum mould height: 710 mm Daylight: 1,380 mm Ejector stroke: 250 mm Ejector force: 81 kN Injection Unit: Screw diameter: 55 mm L/D: 22 Injection pressure: 2,481 bar Screw stroke: 325 mm Bsdpfew Dcxdsx Akaslg Shot volume: 772 cm³ Injection weight (PS): 710 g Injection speed: cm³/s Screw speed: 294 rpm Max. plasticising rate: 68 g/s Number of heating zones: 1 + 5 Electrical & Hydraulic Equipment: Installed heating power: 45 kW Pump capacity: 26.6 kW Tank volume: 660 l Machine Dimensions & Weight: Approx. dimensions: 7.53 m x 1.79 m x 2.31 m Total machine weight: 15,200 kg

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Bledpjxyqxujfx Akaog Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Bljdpfjxyqw Rex Akajg Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2010, Battenfeld HM 110/350 injection molding machine Year of production: 2010 Control: Unilog B6 Number of working hours - 35 0000 Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection capacity: 153 g Closing unit: Closing force: 1100 kN Distance between columns: 470 x 420 mm Min mold height: 275 mm Opening: 500 mm Max mold height: 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight: 4.500 kg Specification: 1. Plasticizing system with a diameter of Ø35mm. 2. (06.X17) Europakiet UNILOG B6 consisting of: - 07.D00 adjustment elements, - 02.K02 air valve controlled in time function - 01.C01 hydraulic control of the NW 6 core on the closing plate - 06.B21 robot connection according to EUROMAP 67 - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet 3. 06X06 UNILOG B6S package consisting of - extended functions of the control system with programs - APS system - cycle time analysis - user pages - visualization of graphic functions of actual values in the form of 16 curves - 4 surrounding curves - Alarm and logging protocol extended to 10,000 events Bodpfjwq D Nqox Akaolg - Quality Table function extended to 10,000 last cycles - additional USB ports for network connections - keyboard with foil buttons - Statistical Injection Process Control SPC function - injection speed, plasticization and hold-down pressure regulated by servo valve 4 machines in perfect condition are available.

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 injection molding machine Control: B6S Year of manufacture: 2011 Operating hours: 68038 Closing unit: Closing force [kN]: 3000 Clamping plate dimensions (hxv) [mm]: 1020 x 1030 Clearance between columns (hxv) [mm]: 710 x 610 Min./max. mold height [mm]: 375 Maximum opening width [mm]: 1150 Blsdpfjwrmqmsx Akaeg Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection unit: Screw diameter [mm]: 55 Injection volume [cm3]: 653 PS injection weight [g]: 600 Injection pressure [bar]: 2040 Maximum injection speed: 144 Additional equipment: Pneumatic valve - 4 pcs. Core - 2 pcs.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 112,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Bjdsx A Dbbjpfx Akajlg Max. injection speed: 144 mm/s MACHINE DETAILS Operating hours: 112,163 h EQUIPMENT Pneumatic valve Core pulls (3 pcs.)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Bodex A Df Topfx Akaelg Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Injection Unit Screw diameter: 55 mm Shot volume: 653 cm³ Shot weight: 600 g Injection pressure: 2,040 bar MACHINE DETAILS Weight: 12,200 kg