Used Kuhlmann Gm 1 /1 for sale (79,159)

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, empty load weight: 18,000 kg, Operating hours: 3597, first registration: 06/23/2016, self-propelled. Standard basic equipment: Fan unit - fan drive hydraulically via the auxiliary drive located on the chassis, independent of the transmission (semi-hydrostatic drive) - hydraulic fan drive - hydraulic oil tank 50 l - engine compartment with noise-reducing material - fan exhaust duct leading upwards through the container front - hydraulic pump, single sweeping material container - sweeping material container (with rear flap and screen) and water tank made of 1.4003 chromium steel - engine compartment cladding made of normal steel - sweeping material container gross volume 6.5 m³ - sweeping material container floor made of chromium alloy stainless steel, 1.4301 - sweeping material container tilting angle approx. 55 degrees - dirt chute made of chromium steel, 1.4003 - inspection flap on the right and left - dirt water drain 4", A-coupling - air intake screen, manually foldable - 2 rear warning lights on the sweeping material container - air shut-off on the suction hose, pneumatically operated - multi-stage locking support, pneumatically operated - marker lights on the container rear, side marker lights - integrated water tank - preparation for rear suction hose boom or mounted on the roof - side marker lights. Sweeping material intake: Sweeping material intake, wear-resistant coating - coarse intake by tilting the suction nozzle - suction hose diameter 250 mm - disc brush, pushed - hydraulically driven disc brush, steel - disc brush, steel, diameter 500 mm, pulled - stepless speed control for disc brush - two robust, pivoting trailing wheels - automatic lifting of the sweeping units when reversing - work lights for sweeping unit. Roller brush: Roller brush suspension, pulled - brush length 1,300 mm, brush diameter 406 mm with plastic trim (chassis-dependent) - hydraulically driven roller brush - throw limitation apron for roller brush unit. Water system: Water tank volume approx. 1,554 l - water container made of chromium steel, 1.4003 with coating - water level indicator in the driver's cab - water filling device, Storz C (2"), right - manual water filling device, right and left - water pump, hydraulically driven - automatic water stop when the sweeping units are lifted - spray water connection, 3/4", rear right - water blowing system - electric water valves in the driver's cab - 2-jet nozzle bar, low pressure, front. Instrument panel and control panel: Bucher instrument panel, incl. 7" color display - ergonomic control unit, mounted on the driver's door, equipped with the main functions - display includes the following functions: water level indicator, operating hours and rear axle load - warning and control lights for rear axle load - control and regulation unit for regulating the brush pressure (brush relief), stepless speed control of the disc brushes - electric valves for water system, operation in the driver's cab - operation of the dirt container functions by means of a cable remote control from the driver's cab, but also possible from the outside - operation of the air intake screen, operation on the rear right of the vehicle - overload indicator for rear axle load, warning light in the display (optional). Itodpfefy Am Ujx Adqsk

Condition: new, back gauge: 750 mm, - Capacity: 1050 x 6 mm - NC electric back gauge - Foot switch - Rear light curtain - Support arms - Cutting line illumination Ijdpfx Aogg N Hbedqetk - Brake motor - Emergency stop - Documentation - Weight: 1800 kg - 400V

Condition: used, mileage: 210,000 km, power: 206 kW (280.08 HP), first registration: 03/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * MAN TGM 18.280 BB Meiller tipper truck * First registration: 03-2007 * Manual transmission * Engine brake * Air conditioning * Leaf spring / Leaf spring * Payload: 7,200 kg * Permissible rear axle load: 10,800 kg * Gross vehicle weight: 18,000 kg * More pictures and videos available via WhatsApp Itodpfeznr Nqjx Adqek * Information without guarantee and subject to prior sale.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel ranges Travel range X-axis: 3,048 mm Travel range Y-axis: 813 mm Travel range Z-axis: 762 mm Main spindle Ijdpeztq Txefx Adqstk Spindle speed: 6,000 rpm EQUIPMENT Coolant system

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Ijdpfoztm Dajx Adqjtk Drive power: 90–200 kW

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Ijdpfx Aoztmvcedqotk Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Itodpeu Itk Refx Adqok Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: used, Year of construction: 2026, Front-mounted disc mower Technical data: Working width: 3.11 meters Number of mower discs with disc protection skid shoes made of hardened steel: 8 Adjustable cutting height with standard skid shoes: 30-50 mm Disc shaft overload protection: PROTECTADRIVE Ground adaptation: pull-type 4-joint suspension Relief setting: via relief springs Lift for swath crossing: using integrated implement lift cylinders Average swath width: 1.30 meters Swath device: via 2x2 rotating, belt-driven swath drums Mounting: via quick-attach triangle on the implement side Conversion to transport position: by folding up the side protective covers Intermediate PTO shaft with freewheel, standard Iodpfx Adjy Acmrjqstk PTO speed: 1,000 rpm, clockwise and counterclockwise (factory setting: clockwise) Power requirement at PTO: 38 kW / 43 hp Required hydraulic connections on tractor: 1 single-acting spool valve Lighting system with warning panels - front and rear of the machine Weight: 1,010 kg Image for reference only, storage location: null

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 Itedpfozu Nvzex Adqok - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: excellent (used), Year of construction: 2005, operating hours: 38,388 h, functionality: fully functional, machine/vehicle number: 019.3784, workpiece weight (max.): 130 kg, grinding length: 1,000 mm, total width: 1,970 mm, total length: 2,735 mm, total height: 1,700 mm, quill travel distance: 35 mm, quill stroke: 35 mm, quill diameter: 50 mm, distance between centers: 1,000 mm, type of input current: AC, spindle speed (max.): 2,110 rpm, spindle speed (min.): 1,670 rpm, grinding spindle speed: 2,110 rpm, overall weight: 3,400 kg, input frequency: 50 Hz, input voltage: 400 V, workpiece spindle speed (max.): 1,000 rpm, STUDER S30-1, manufactured in 2005, machine no. 019.3784 – universal cylindrical grinding machine, hydraulically controlled, for between-centers grinding and external grinding. Well-maintained, original condition, no indication of damage or weld repairs. Included: Original operating manual from Fritz Studer AG (DE/EN/FR, including spare parts catalog and noise measurement report) and EC declaration of conformity, both issued for this machine number. According to this factory documentation, it is the version with a center distance of 1,000 mm. EQUIPMENT - Grinding spindle with external grinding wheel on the left, Ø 400 x 80 x Ø 127 mm, hydrodynamic plain bearings, mounting taper Ø 63 mm - Workpiece spindle, swiveling 0-90°, MK 5, collet chucks W-25, 30-1,000 min-1 continuously variable via frequency converter - Three-jaw chuck mounted, drive for between-centers grinding, centering point in the tailstock - Tailstock MK 3, quill stroke 35 mm, adjustable spindle pressure, fine adjustment for roundness ± 40 µm - Adjustable dressing device on the tailstock (dressing by hand; diamond is a wear part) - Digital display Sony LD10 on swivel arm Iodpfxezu T Afs Adqstk - Hydraulic unit Wandfluh (CH), coolant supply with filtration and aerosol extraction - Machine bed made of mineral cast Granitan S103 - 8 grinding wheel mounting flanges, including one balancing flange IMPORTANT – WHAT IS NOT INCLUDED This machine does NOT have an internal grinding attachment, NO belt spindles, and NO in-process measuring control. The series is prepared for these at the factory, but none of them are installed on this machine; available as accessories from STUDER. Grinding wheels are also not included in the scope of delivery. We only describe what we can document photographically. TECHNICAL DATA (according to the operating manual for this machine) - Center distance 1,000 mm, clamping length 1,030 mm, table stroke 1,050 mm - Max. workpiece weight between centers 130 kg, table swivels 8.5° - X: Rapid traverse 60 mm, plunge depth 3.4 mm in Ø, feed rate 0.012-6 mm/min, incremental feed from 0.001 mm - Z: 50-5,500 mm/min, smallest automatic table stroke 1.5 mm - Grinding spindle 1,670 / 2,110 min-1; machine's power rating: max. 35 m/s, wheel up to Ø 400 mm at 1,671 min-1, up to Ø 316 mm at 2,114 min-1 - Automatic hydraulic grinding cycle: rapid approach, feed 1 and 2, sparking 0-6 s, automatic shut-off - Guaranteed working accuracy (factory specification): straightness 0.0025 mm over 400 mm, 0.004 mm over 650 mm; roundness in external grinding 0.0003 mm - Operating hours 38,388.5 h; connection 400 V / 50 Hz, max. 13 kVA, air 5 bar; noise level ≤ 75 dB(A) - Weight approx. 3,500 kg (factory brochure, 1,000 mm version), footprint approx. 2,735 x 1,970 mm - Center height: will be remeasured and confirmed upon request CONDITIONS Location: 16727 Velten near Berlin. Machine packed on a wooden pallet, delivery 1-2 working days after payment receipt. FCA Velten (Incoterms 2020), loading onto your truck by our staff included. Payment: 100% advance payment. Inspection possible with short notice by appointment. Demonstration and test grinding only by appointment: the machine is disconnected, setup will be carried out by an external service provider; we will agree on the effort and costs in advance. Technical data according to manufacturer's documents and the included operating manual are provided as information; we will confirm individual values during the inspection or upon request. Offer subject to

Condition: like new (used), functionality: fully functional, mileage: 143,000 km, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, Year of construction: 2021, MAN TGM 19.290 EURO 6 19 tons Air suspension GPS tracker Itedpfx Ajzn N U Dedqjk Automatic transmission Tail lift 8.5m box body Inspected Like new

Year of construction: 2006, condition: ready for operation (used), travel distance X-axis: 3,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 17,000 kg, total height: 3,395 mm, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, table load: 6,000 kg, number of axes: 4, This 4-axis GORATU G Master 31 was manufactured in 2006. It features a large table of 3000 x 900 mm, capable of handling a maximum weight of 6000 Kg. The machine offers extensive travel with 3000 mm on the X-axis, 900 mm on the Y-axis, and 1500 mm on the Z-axis. It includes a 24-slot tool changer and a powerful main motor of 22/27 kW. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Table dimensions: 3000 x 900 mm • T-slots: 5 x 22 x 160 mm • Feed speed: 20000 mm/min • Tool changer: 24 Extra Information Iedpfjyar I Sjx Adqstk Machine still under power Dimensions Machine Depth 8100 mm

Condition: excellent (used), mileage: 452,826 km, power: 250 kW (339.91 HP), first registration: 05/2011, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, Year of construction: 2011, = Additional options and accessories = - PTO = Remarks = WMAN46ZZ9CY273333 = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Steering Technical condition: very good Visual appearance: very good Registration number: BZ504NQ = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Itodpfxjymrwmj Adqek When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Handtmann VF628 vacuum filler with PVLS143 high speed linker cutter from 2021 and GS300 auto tray loading system consisting of GM310 and ZB311. Rarely available. We can offer an additional similar setup with VF622 instead of VF628. Itsdpfxjvvxume Adqjk

Condition: ready for operation (used), * Brand: dbr Fördertechnik * Surface: 5000 x 2000 mm – 1 deck. * Driving: E-motor 15 kW * Incl.: springs and springsupport. * Stock: 2 pieces. Ijdpfx Adey R Rvweqjtk

Condition: new, weight max. 1,0 t stroke 4000 mm Use as a stationary chain hoist Chain hoist type GM 4 1000.5-2, 2 strands painted in color RAL 5017 traffic blue Load capacity 1 ton Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-changing) 1.3 / 5 m/min Lifting power 0.22 / 0.9 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control Itodpfx Ajh Un Hasdqsk The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. Itodpjzrd Slefx Adqek A used machine is being sold as part of a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: used, Year of construction: 2017, Technical data / Working width / (m) 3.1 / OPTIDISC cutter bar / Number of cutter discs with / stone protection skids 7 / Swath width / (m) 2.3 / Non-stop safety release / PROTECTADRIVE driveline protection / Weight (kg) 900 / Lei Isdoqrru Rspfx Adqetk

Year of construction: 2021, condition: good (used), functionality: fully functional, The temperature control unit GWK (Technotrans) is for sale. The unit has a new pump installed. Medium: Water Operating temperature: 180 degrees Celsius Heating capacity: 9 kW Cooling capacity: 40 kW Isdozul Tpepfx Adqotk

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2023, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total length: 13,650 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 9,200 mm, color: white, Year of construction: 2023, Equipment: tail-lift, = Additional Options and Equipment = - SAF axles = Further Information = Axle Configuration Axle brand: Pirelli Rear axle 1: Max. axle load: 9,000 kg; Left tire tread: 100%; Right tire tread: 100% Rear axle 2: Max. axle load: 9,000 kg; Left tire tread: 100%; Right tire tread: 100% Rear axle 3: Lift axle; Max. axle load: 9,000 kg; Left tire tread: 100%; Right tire tread: 100% Weights Kerb weight: 6,200 kg Payload: 32,300 kg Gross vehicle weight (GVW): 38,500 kg Functional Tail lift: D'Hollandia under-slung tail lift Maintenance, History and Condition APK (Roadworthiness Test): New TÜV certificate upon delivery Optical condition: very good Itsdpfsyx A Stsx Adqjk Further Information Please contact Jelmer Broekhuizen, Mike Kornet or John De Frankrijker for more information.

Condition: used, mileage: 154,904 km, power: 184 kW (250.17 HP), first registration: 05/2012, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: yellow, gearing type: mechanical, number of gears: 8, emission class: euro5, suspension: steel, total length: 7,400 mm, total width: 2,550 mm, loading space length: 4,050 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2012, Equipment: AdBlue, air conditioning, crane, cruise control, differential lock, electric window regulation, traction control, = Additional options and accessories = - Hub reduction - Radio - Rear view camera - Sun visor - Tool box = Notes = Man TGM 18.250 4x4 BB Full spring suspension. Large axle. 16-speed manual gearbox. Crane: Brand: HMF Type: 1020 K1 Scanreco radio remote control. 3.80 m - 2,560 kg. 5.40 m - 1,790 kg. Bakker Graph - 80 cm. 3-way tipper. Hydraulic function at the rear with multi-coupler. = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 385/65R22.5; Steerable; Tire tread left: 70%; Tire tread right: 70% Rear axle: Tire size: 315/80R22.5; Dual tires; Tire tread left (inner): 80%; Tire tread left (outer): 80%; Tire tread right (inner): 80%; Tire tread right (outer): 80% Weights Unladen weight: 10,625 kg Payload: 7,975 kg GVW: 18,600 kg Functional Crane: HMF Financial information Itjdsy Tl D Iepfx Adqjk Price: On request Identification Model number: TGM 18.250 4x4 BB / CRANE + 3 SI = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT). We speak Russian. We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: new, sheet width 1050 mm plate thickness 3 mm distance between columns 1100 mm back stop - adjustable 600 mm connected load 3 kW weight of the machine ca. 1,1 t dimensions 1,7 x 2,1 x 1,3 m The machine works quietly and it is energy-saving by its gear motor and brake Itodpfx Adjfv H Dgjqok system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: excellent (used), mileage: 132,801 km, first registration: 04/2007, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 300 l, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, = Additional options and accessories = - Aluminum fuel tank - Brake booster - Low noise - Air suspension - Air horn - Reversing camera - Sleeper cab - Sun visor flap - Stability control - Toolbox = Further information = Front axle: Steered Rear axle: Twin tires Number of cylinders: 6 Engine displacement: 6,871 cc Unladen weight: 9,890 kg Technical condition: very good Visual condition: very good Price: On request MAN TGS 18.240 4X2 + FAUN VIAJET 6R/HS SWEEPER/ROAD CLEANER EURO 4 L PACKAGE 240 HP Itsdpfeuxv Sljx Adqjk DRIVE 4X2 WHEELBASE 360 CM AIR SUSPENSION TGM SLEEPER CAB WITH AIR CONDITIONING & CAMERA MANUAL TRANSMISSION FAUN VIAJET 6R/HS SWEEPER CAPACITY 6 M3 WATER TANK 1200 LITERS HIGH-PRESSURE WATER PUMP WITH SPRAY BAR AT THE FRONT OF THE VEHICLE 1X SIDE BRUSH CENTRAL BRUSH ROLLER ROLLER BRUSHES ROAD CLEANER EXTRA HIGH-PRESSURE REEL WITH SPRAY LANCE JOYSTICK CONTROL MW32 PUMP 135 L/MIN 300 BAR -1 1500 77 KW 6,993 HOURS PRICE 22,500 EURO NET EX FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input current: 30 A, input voltage: 400 V, input frequency: 60 Hz, We offer this ready for use Summa F1612-1 flat-bed cutting machine, year of construction 2019. Model: F1612-1 Serial number: 101708-14001 Supply voltage: 208/230/400 VAC Phase: 3 ph Frequency: 50/60 Hz Current: 30/15/15 A Isdpfx Aszrtfhodqstk Country of manufacture: Belgium No software included If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), gearing type: hydrostat, fuel type: diesel, color: white, operation weight: 1,900 kg, axle configuration: 4x2, number of seats: 1, Year of construction: 2003, operating hours: 1,768 h, Equipment: onboard computer, Road Marking Machine: + Euroliners + Trassar 201A + Year of manufacture: 10/2003 + 1,768 operating hours + 1,900 kg + 3-cylinder diesel engine, 36 hp Iedpfx Ajyhd E Sodqotk + Hydrostatic drive + Articulated steering + Protective roof + Rear warning device + 2 bead containers of 130 L each + 2 paint tanks + bracket for a third tank on the right + Airless pump + Compressor + Guide rod and spray boom hydraulically adjustable + Machine from municipal ownership Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and changes excepted, subject to prior sale!