Used Koch-Technik Conveying Device for sale (25,465)

Condition: used, functionality: fully functional, The separator is for sale from the company trio-technik ; Filling via funnel with a plexiglass cover L: 900mm W: 700 mm H: 700-1200mm Hfjdpfouhzvlex Aicjk Inclination max. 20 degrees Speed const. Discs can be adjusted

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Hfsdpfxsyk Ea As Aicok

Condition: as good as new (ex-display), +++++ We manufacture the original +++++ Non-binding offer. Compact system LLK 246. Copper cable recycling machine. System for processing copper cable. - Consisting of a granulator, conveying fan, separation table, and extraction system. - PLC controlled. Available as a new or used system. - Ex works. General Terms and Conditions available on our website. Hsdpfx Aiofb R Ixscjfk

Condition: new, Year of construction: 2026, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies Hedou Hz Tqjpfx Aicjfk + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Year of construction: 1980, operating hours: 30,000 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 04430, Fully automatic machine with - Automatic feed and removal handling - Control of steam and cooling water supply - Cold water pump to increase the cooling capacity - Set of new tools (designed for the production of 180g 12" records) - Plasticizing unit with suction for vinyl granulate Hfsdeuauvvjpfx Aicsk

Year of construction: 2026, condition: as good as new (ex-display), The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. Hjdpfx Ajb Rz R Uoicjfk By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine

Condition: new, functionality: fully functional, machine/vehicle number: Typ-U6M_Angebot, empty load weight: 210 kg, maximum load weight: 540 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,500 mm, loading space height: 150 mm, suspension: other, Year of construction: 2026, Koch trailer, 150x250cm, 750kg, "Type U6M" Our best-selling, unbraked Koch trailer, Type U6M, with a body made entirely of anodized aluminum. Car trailer, Type U6M, with loading dimensions of 150 x 250 x 25cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 540kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features: 10-year warranty (unique) Double-walled, anodized aluminum side panel, 30mm (unique) Side panel with a load securing system in V2A stainless steel (unique) 1 x 22/200 aluminum ramp, mounted on the side Hodpoi R Hxksfx Aicjfk Side panel fastening with 8 mm V2A stainless steel screws (unique) Support wheel, standard 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional features: 15mm thick, stable screen-printed wooden floor, slip-resistant birch plywood, waterproof glued Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185/70 R13 tires, balanced and suitable for 100 km/h Steel sheet fenders, fastened with 8 mm stainless steel screws 12-volt electrical system, 13-pole plug with reversing light 2 rear supports, as shown, are available as accessories for €102.00 Other Vehicle registration document / registration certificate, Part 2 If you would like to purchase this trailer or have any further questions, please use our internal box trailer "Type U6M_Offer".

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 600 h, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending radius (max.): 96 mm, mandrel length: 4,500 mm, overall weight: 1,000 kg, For sale is a pipe bending machine, purchased in 2021 and used for only two years. Since then, it has been stored in a dry warehouse. It can bend pipes with a diameter from 12 mm to 48.3 mm and a wall thickness of 4.5 mm. Dies/jaws and mandrels for steel and stainless steel pipes are included. Self-collection required upon sale. Hsdpfx Aoxvhm Isicsfk

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) Hfodpfxjx E Rdwj Aicjk - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: reconditioned (used), We manufacture the original. We offer you a used, workshop-reconditioned granulator GA75 / 9 for sale. Hedpsh S U Ryefx Aicsfk - Motor power: 75 kW, new motor - 9 rows of rotor knives, 4 stator knives - new rotor with completely new bearings and new, hardened wear parts. Inquiries only from commercial businesses!

Year of construction: 2024, condition: new, +++++ We manufacture the original +++++ Machine parts for the pre-shredders VZ 120, VZ 110, VZ 90, VZ 55. Rotor shaft wear parts. Copper cable recycling machines. Made by Koch. Hodofgiuzjpfx Aicjfk Dortmund - Dorstfeld. Germany. Our non-binding offer: - Labyrinth rings - Dirt deflectors - Spacing rings - Rotor shafts Terms and conditions on our website. Our goal – to help you.

Condition: new, +++++ We manufacture the original +++++ Non-binding offer Hedpfxjflkz Ho Aicefk Copper cable recycling machine 1 unit GA 37-450 granulator cutting unit - completely assembled - incl. motor (37 kW) - with inlet hopper, outlet hopper, and belt guard - 1 set of knives (5 rotor knives and 2 stator knives) - 1 screen - Mounting, system integration into your plant - ex works Our general terms and conditions apply.

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment Hfsdowd Rlfjpfx Aicok

Condition: good (used), functionality: fully functional, The bunker conveyor belt with cycle control of the company trio-technik is for sale, here are a few tech. Hints! Video of the belt available !!! Hfedjt Uqv Njpfx Aicsk Total length: 2000 mm Belt width: 400 mm Cleat height: 20 mm FDA blue belt Mobile Hopper made of VA sheet metal Belt speed const. 7m/min Discharge height: 1500 mm Total height: 2200 mm Stable base frame etc.

Condition: new, Year of construction: 2021, functionality: fully functional, The Z-shaped conveyor belt from trio.technik is for sale; Infeed: 600 mm with complete hopper Incline: 1900 mm Discharge: 500 mm Hfedpfxswb Skqj Aicjk Usable width: 450 mm Constant belt speed: 3 m/min Mobile Adjustment range via the wheels: 300 mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The MTF conveyor belt is for sale, equipped with a new conveyor belt and a cycle control system. Feeding length: 1100 mm Inclined belt: 900 mm Usable width: 200 mm Total width: 400 mm Hjdpfsywhvujx Aicofk Mobile unit Cycle control system

Condition: used, Year of construction: 2018, functionality: fully functional, The conveyor belt (3 pieces) from MTF Technik is for sale with CE marking and various functions. A video can also be provided via WhatsApp. Length: 2000 mm Width: 400 mm Hsdpfxjwl Dige Aicofk Height: 700 mm Height: 850 mm - 1100 mm Constant belt speed: 16 m/min Tunnels are 20 mm high and can be moved every 300 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, The conveyor belt from MTF is for sale with the following technical specifications: Cycle control Speed: 4 m/min Infeed height: 1000 mm Inclined belt: 700 mm Usable width: 200 mm Overall width: 380 mm Hfedpfx Asyntx Ieicjk Heat-resistant belt: up to 140°C Cleats: 30 mm high every 480 mm Mobile version

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, There are 14 pieces of steep conveyor belts with corrugated edge for sale, the price is per piece; A few data about the conveyor belt ; L: 2000mm NB: 270mm GB: 470mm Belt speed constant : 4m/min Cleat height : 30mm Corrugated edge : 30mm high Hopper in the lower area Hodpfx Aju Smlisicsfk Heat resistant belt

Condition: used, Year of construction: 2012, functionality: fully functional, The bunker conveyor belt from Trio technik is for sale; original price €6,200. Hfodjxqdygspfx Aicek Length: 1800 mm Usable width: 200 mm Overall width: 270 mm Cleat height: 30 mm with a pitch of 150 mm Belt inclination angle: 60 degrees Stainless steel hopper with approx. 110 liters capacity Raised side guides, 130 mm high PVC covers throughout Discharge height: 1275 mm With Schütz control unit, max. 1 kW Machine dimensions: L: 1450 mm, W: 550 mm, H: 1825 mm

Condition: refurbished (used), The angled conveyor from MTF is available for sale. Feed length: 1300 mm Elevating belt: 1300 mm Maximum drop height: 1200 mm Usable width: 240 mm Total width: 520 mm New motor protection New conveyor belt with corrugated edge Corrugated edge: 300 mm Hedpfxjxmut Ns Aicofk Cleat height: 30 mm Belt speed: 4.2 m/min Mobile, with new running rollers

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, The separating device from trio-technik is for sale. This unit is designed for the separation of objects with various geometries. Length: 950 mm Hfodox Dm Rzepfx Aicjk Width: 700 mm Height adjustable: 700-1380 mm Possible gap width: 50 mm Tilt angle: max 20 degrees Drive/three-phase current: 400V 50Hz Power consumption: 0.09 kW/h Speed adjustable.

Condition: used, Conveyor belt, belt conveyor, belt feeder, MTF belt conveyor Year of manufacture: approx. 2015 Usable length: 2300 mm Belt width: 320 mm Belt length: approx. 4750 mm Frame profile height: 32 mm Return roller diameter: 25 mm Belt speed: 25 m/min to 50 m/min Conveyor height: approx. 950 to 1350 mm Hfjdpsx R Eh Isfx Aicjk Motor power: 0.25 kW Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via ABB frequency inverter, type ACS150-03E-01A2-4 - Belt drive via RGM geared motor - Two-piece belt body made of aluminium profile with 8 mm slot - Belt body made of aluminium profile with stainless steel sheet cladding - 1 height-adjustable base with quick adjustment, mobile on 4 fixed castors - Conveyor belt was extended by approx. 1000 mm at some point. The lateral connecting rails are somewhat unstable Overall dimensions (L x W x H): 2350 x 500 x 900 mm Weight: 63 kg

Year of construction: 2008, condition: used, overall weight: 75 kg, terms of delivery: FCA Pegnitz delivery time: on request Hedpfx Ajwyfm Noicofk terms of payment: 100% prior to delivery

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Manufacturer: Wanner Technik GmbH Type: 13.20 Grinding chamber dimensions: 130 x 200 mm Power: 2.2 kW Cascade knife arrangement Hedpfx Aeyz U Ekoicefk New knives!!!