Used Igrek Dt 4000 for sale (3,366)

Condition: excellent (used), Year of construction: 2003, overall weight: 8,200 kg, total height: 450 mm, total length: 5,370 mm, total width: 2,100 mm, plate height: 450 mm, plate width: 2,100 mm, groove spacing: 300 mm, Floorplate Length: 5370mm Floorplate Width: 2100mm Height: 450mm No. Of T-slots: 7 Distance from T to T-slot / Jump:300mm T -slot size: 41mm Weight a plate approx.: 8200kg Number of matching pieces: 1 Length: 5370mm Width: 2100mm Height: 450mm Weight: 8200kg Kdodpjyg Igdofx Ampok Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), overall weight: 6,000 kg, total height: 400 mm, total length: 4,510 mm, total width: 1,815 mm, plate height: 400 mm, plate width: 1,815 mm, Floorplate Length: 4510mm Floorplate Width: 1815mm Kedpfx Amsyg Icrepedk Height: 400mm No. Of T-slots: 6 Distance from T to T-slot / Jump:285mm T -slot size: 36mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Length: 4510mm Width: 1815mm Height: 400mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1998, operating hours: 98,806 h, clamping force: 40,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 255,000 kg, 2x KraussMaffei KM 4000-19000 MC – Injection Moulding Machines – Year 1998 For sale are two identical injection moulding machines manufactured by KraussMaffei, model KM 4000-19000 MC equipped with MC3F control system. These machines are particularly suitable for producing large plastic components that require very high clamping force. The systems are fully equipped and include several peripheral devices for material feeding and process control. ## Technical Data * Manufacturer: KraussMaffei * Model: KM 4000-19000 MC * Control: MC3F * Year of manufacture: 1998 * Operating hours: approx. 98,806 h * Clamping force: 40,000 kN * Maximum shot weight: 8,100 g * Screw diameter: 130 mm ## Dimensions & Weight * Machine depth: 4,900 mm * Machine height: 4,200 mm * Machine weight: approx. 255,000 kg ## Equipment * Robot interface: KUKA KRC4 * Sequential injection controller: S.I.S.E. IS-Tech * Temperature control units: GWK * Dosing and mixing system: Motan Colormetric * Belt conveyor ## Available Machines Kdodoyt Hy Njpfx Ampok * Machine No. 14 * Machine No. 15 The machines can be purchased individually or as a package. Inspection by appointment is possible.

Condition: used, Year of construction: 1961, faceplate diameter 3500 mm turning diameter 4000 mm centre distance 16000 mm turning speeds 0,71-33,5 U/min Rest 2 max. workpiece weight -without tailstock 6300 kg max. workpiece weight between centres 18000 kg total power requirement 31 kW weight of the machine ca. 60 t dimensions of the machine ca. 22x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Ksdpfx Aoyqvczjmpsdk Your Markus Hirsch Team

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, total width: 3,700 mm, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 285 kg, DGUV certified until: 03/2028, electrical fuse: 16 A, opening width: 45 mm, space requirement length: 1,235 mm, space requirement width: 3,700 mm, type of input current: three-phase, NEW +++ Rondostar 4000 ECO Dough Sheeter +++ NEW Computer control / touch panel Suitable for all dough types for sheeting and laminating Stainless steel design, mobile with adjustable feet Sheeting thickness electrically adjustable from 0.2 to 45 mm Electric flour duster Product width up to 635 mm Includes 2 dough rollers / manual winder Easy tool cleaning Max. dough piece weight: 15 kg Dough catch trays left & right DGUV V3 safety-tested exclusively by us Machine is mobile Connection: 400V, 16A-CEE plug Dimensions: 3700 x 1235 mm (W x D) Brand new & SAB-certified With warranty Professional quality from a specialist workshop! Benefit from over 35 years of experience! Options: Automatic winder Maintenance contract Service package Spare parts box Tray Delivery service Training & commissioning Kdsdpfxsx Ncdkj Ampjk We have more top-quality dough sheeters in stock!

Condition: good (used), Year of construction: 2013, 4000mm between centres, swing 950mm, swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, 30Hp, 630rpm spindle speed, Kodpjxp Hhdofx Ampedk automatic 8 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady.

Condition: as good as new (ex-display), Year of construction: 2022, Working width: 530 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2900 mm Dressing table adjustment: lever Hollow point adjustment: no Gap removal indicator: scale Hollow pointed joint display: - Ksdpfshpl Szjx Ampsdk Dressing fence angle adjustable: yes Motor power: 5,5 kW machine length: 2900 mm Machine width: 1000mm Weight: 810 kg

Condition: good (used), Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, rotary indicator, resolver, rotary pulse generator, tachogenerator, incremental encoder Kdjdpfx Amjqvp Rhepek -Manufacturer: Hohner, encoder rotary encoder -Type: 30 4000 -Shaft: Ø 12 x 25 mm -Number: 2 encoders available -Price: per piece -Dimensions: Ø 90 x 143 mm -Weight: 1.1 kg/pc.

Condition: used, mileage: 1,073,700 km, power: 375 kW (509.86 HP), first registration: 12/2015, fuel type: diesel, number of seats: 78, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), parking heater, +++Engine overhauled in 12/24+++ +++Transmission overhauled in 12/24+++ General Engine: Mercedes-Benz AdBlue Emission standard: EURO6 Total seats: 78 Seats: 77+1 sleeper seats with 3-point belts Standing places: 21 Transmission: Automatic Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobilizer * Xenon headlights * Brake assist * Lane departure warning * Reversing camera * Multifunction steering wheel Passenger compartment * Auxiliary heating * Wood-look flooring * Air conditioning * Curtains * Luggage racks * Adjustable air vents * Reading lights * Refrigerator * Center toilet * Leather headrest inserts * Tour guide microphone * Driver microphone * Stroller space * Wheelchair ramp * Wheelchair space * Interior camera Audio, Communication, Electronics * Radio, CD * USB port on multimedia system * Video, DVD * Sockets * Power inverter Exterior * Trailer coupling * Matrix/destination display * Lifting/lowering system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Driver's door * Ski box mounts * Central locking * Roof hatches Other * Twin tyres * Vehicle length: 13.89 m * Vehicle width: 2.55 m * Vehicle height: 4.00 m * Hubcaps * Tyres: FA approx. 40 % Kedpfjxrxakjx Ampsdk * Tyres: MA approx. 40 % * Tyres: RA approx. 40 % Our internal vehicle number: 11934 Errors excepted. Images and text may differ from the actual vehicle. Over 300 vehicles in stock at all times.

Condition: used, mileage: 1,317,996 km, power: 375 kW (509.86 HP), first registration: 12/2015, fuel type: diesel, number of seats: 78, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), parking heater, General Engine: Mercedes-Benz AdBlue Emission standard: EURO6 Total seating capacity: 78 Seats: 77+1 sleeping seat with 3-point seat belts Standing places: 19 Transmission: Automatic Safety Features * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobilizer * Xenon headlights * Brake assist * Lane departure warning system * Reversing camera * Multifunction steering wheel Kdjdpfx Amsxrxadopok Passenger Area * Auxiliary heating * Wood-effect flooring * Air conditioning * Tables * Curtains * Luggage racks * Individual air vents * Reading lamps * Double glazing * Refrigerator * Central toilet * Leather headrest inserts * Driver's microphone * Pram storage * Wheelchair ramp * Wheelchair space * Interior camera Audio, Communication, Electronics * Radio, CD * USB port on multimedia system * Video, DVD * Power sockets * Voltage converter Exterior * Tow bar * Matrix/destination display system * Lifting/lowering system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Driver’s door * Ski box mounts * Central locking * Roof hatches Other * Twin tyres * Vehicle length: 13.89 m * Vehicle width: 2.55 m * Vehicle height: 4.00 m * Wheel covers * Tyres: front axle approx. 50% * Tyres: middle axle approx. 50% * Tyres: rear axle approx. 50% Our internal vehicle number: 11936 Subject to errors. Images and descriptions may differ from the actual vehicle. Constant stock of over 300 vehicles available.

Condition: used, mileage: 1,127,938 km, power: 375 kW (509.86 HP), first registration: 11/2015, fuel type: diesel, number of seats: 78, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), parking heater, +++Engine overhauled in General Engine: Mercedes-Benz AdBlue Emission standard: EURO 6 Total seats: 78 Seating: 77+1 sleeper seats with 3-point seat belts Standing places: 21 Transmission: automatic Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobilizer * Xenon headlights * Brake assist * Lane departure warning system * Reversing camera * Multifunction steering wheel Passenger compartment * Auxiliary heater Kdedpfxsxtczne Ampjk * Wood-effect flooring * Air conditioning * Curtains * Overhead luggage racks * Adjustable air vents * Reading lights * Double glazing * Refrigerator * Microwave * Central toilet * Leather headrest inserts * Tour guide microphone * Driver microphone * Stroller storage area * Wheelchair ramp * Wheelchair space * Interior camera Audio, Communication, Electronics * Radio, CD * USB connection at multimedia system * Video, DVD * Power sockets * Voltage converter Exterior * Trailer hitch * Matrix/destination display system * Lift/lowering system * Power steering * Digital tachograph card * Sun visor * Electrically adjustable exterior mirrors * Driver's door * Ski box mounts * Central locking * Roof hatches Miscellaneous * Twin tires * Vehicle length: 13.89 m * Vehicle width: 2.55 m * Vehicle height: 4.00 m * Hubcaps * Front axle tires approx. 40% * Center axle tires approx. 40% * Rear axle tires approx. 40% Our internal vehicle number: 11935 Errors excepted. Images and text may differ from the actual vehicle. Always over 300 vehicles available in our inventory.

Condition: used, Year of construction: 1995, turning diameter 890,820 mm turning length 4000 mm control Siemens SIN 880T spindle taper DIN 55026/15 spindle passage 122 mm cross movement 500 mm quill stroke 140 mm tailstock adjustment 3708 mm spindle turning speed range 5-1800 U/min milling tool taper 1500-6000 U/min feed 0,5-5000 mm/min rapid traverse 15 m/min feed power 22000/10000 N Tool changer 95 St. steady CNC tail stock CNC total power requirement 50/69 kW Kdsdsyuqkhjpfx Ampok weight of the machine ca. 23,5 t dimensions of the machine ca. 10x4x3,3 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x2000x2000 mm Weight 190 kg Kdsdpfx Ajvz Eggsmpok Total power requirement 3 kw

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Kedpfx Amsu Tg I Djpsdk Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Kdedpfxeylk Nxj Ampsk Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 4,000 mm, total height: 900 mm, TOP workbench AT 4000 with beech worktop, mobile Stainless steel workbench AT 4000 with beech wood worktop bottom with storage grate drawer unit on the left Dimensions: 4000 x 800 x 900 mm (W x D x H) Used unit, cleaned Top sanded and newly oiled We have more top-quality workbenches in stock! Ksdpfjykifpex Ampedk

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, conveyor belt width: 635 mm, warranty duration: 12 months, total width: 3,700 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2028, electrical fuse: 16 A, opening width: 45 mm, working width: 635 mm, space requirement length: 1,235 mm, space requirement width: 3,700 mm, type of input current: three-phase, NEW Rondostar 4000 ECO Sheeting Machine NEW Computer control / touch panel for rolling and laminating all types of dough with automatic spool for rolling up on the right Stainless steel construction, mobile Rolling thickness electrically adjustable from 0.2 to 45 mm electric flour duster incl. 2 dough rollers / manual spooler easy tool cleaning exclusively DGUV V3 tested by us Mobile machine with parking brake Connection: 400V, 1.1 kW, 16A CEE plug Dimensions: 3700 x 1235 mm (W x D) Brand new & SAB certified Kdedpfx Ajx Nccyjmpek 12-month warranty Quality from a specialized company! Benefit from over 35 years of experience! Options: Maintenance contract Service package Spare parts box Dough conveyor Delivery service Instruction & commissioning We have other TOP sheeting machines in stock!

Condition: like new (used), Year of construction: 2018, As-new horizontal sheet metal storage racks by Hakon Steel (2 units) Each rack comprises: 1x HR 400-200 3T/7+1 (lower section) Sheet size: 4000 x 2000 mm 7 pull-out drawers with drawer locking Load capacity per drawer: 3000 kg Usable drawer height: 110 mm Rack height: 1975 mm Rack width: 4520 mm Fitted with swing doors on the front and Kdodpfx Ajybbxpjmpek 1x HSR 400-200 3T/7 (upper section) Sheet size: 4000 x 2000 mm 7 cassettes (+top drawer) Load capacity per cassette: 3000 kg Usable cassette height: 110 mm Rack height: 2480 mm Rack width: 4520 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 6,746 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,995 mm, motor manufacturer: GM 4.3 L, gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 80 %, front tire size: 27X10-12, rear tire size: 32X12.1-15, overall weight: 14,800 kg, empty load weight: 9,800 kg, total height: 3,000 mm, total length: 4,340 mm, total width: 2,150 mm, color: yellow, Equipment: adjustable boom, all wheel drive, cabin, lighting, pallet forks, 🔧 Looking for a reliable forklift? We are industry specialists! We specialize in the sale of high-quality forklifts, offering well-maintained machines in excellent condition. Check out our offer and find the perfect equipment for your company! 💼🔍 🚜 In this listing we present: COMBILIFT C5000SL – DUPLEX 4000 mm – Year 2019 – LPG – CABIN – HEATING – CONDITION 5/5 This forklift is in excellent technical and visual condition, ready for immediate use. Perfect for the wood, steel, and pipe industries, or anywhere long loads must be handled in narrow spaces with precision. 🔍 Key Features & Technical Data: Model: COMBILIFT C5000SL Year of manufacture: 2019 🗓️ Load capacity: 5000 kg ⚖️ Mast type: Duplex Kodpfx Amoy Awfvjpjdk Lifting height: 4000 mm ⬆️ Drive type: LPG ⛽ Load center: 600 mm Free lift: 1700 mm Fork length: 1200 mm Mast height: 3000 mm Engine: GM 4.3 L, 175 HP 🔥 Total weight: 9800 kg Overall height: 2780 mm Overall length: 4340 mm Overall width: 2150 mm Operating hours: 6746 h ⏱️ Tires: Solid, superelastic, excellent condition Front: 27X10-12 – 100% tread Rear: 32X12.1-15 – 100% tread Condition: Fault-free ✅ Visual appearance: Very good 👍 🛠️ Equipment: Full heated cabin ❄️🔥 Work lighting 💡 Adjustable boom Sideshift fork ↔️ Pallet forks 🏗️ Superelastic tires in very good condition ✨ Additional Advantages: Integrated multidirectional steering system 🔄 Comfortable operator cabin 🪟 High reliability under intensive use 💪 Fully serviced – ready to work! 🟢 🚚Extra Benefits: Transport across all of Europe 🌍 FREE initial inspection included 🎁 💶 Pricing & Financing: We offer full financing support: Invoicing available in EUR or PLN 💱 Leasing options for new businesses too (Start-up friendly) 🚀 We work with most major leasing companies 🏦 Leasing decision within 2 hours! ⏳ ✅ FAST / SIMPLE / AFFORDABLE FINANCING

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (min.): 6,000 rpm, table width: 1,100 mm, table length: 4,200 mm, rotational speed (max.): 6,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic universal head, 0.02 degree in both axes Kdodpfew Ngd Tsx Ampok Machine will be refurbished in 2025

Condition: excellent (used), Year of construction: 2001, center height: 525 mm, workpiece weight (max.): 5,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 1,060 mm, The machine underwent a retrofit in 2024. Control: Siemens Sinumerik 840D. Kdodpow Ngm Uefx Ampjk

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, For sale: this lathe. Swing diameter over bed: 1,000 mm. Turning length: 4,000 mm. Sinumerik 840D control. Ksdpfx Amsxzr Rbopodk

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,963 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X45-15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of Experience | 🧰 In-house Service & Paint Shop | 🤝 Expert Consultation | 🚛 Own Transport Fleet | 🔧 Comprehensive After-sales Support Kdedpoy Ar Hbofx Ampjk Looking for a forklift you can truly rely on? We are a reputable dealer of new and used forklifts, serving the industry for many years. Our customer base spans all of Europe—from small businesses to major industrial facilities. Our forklifts are more than just equipment—they are your assurance of seamless and dependable logistics. -- What sets us apart? -- ✅ Every forklift undergoes a thorough technical inspection and servicing (including checks, tests, oil & filter changes, and component refurbishment) ✅ Full UDT (Office of Technical Inspection) certification available on request ✅ In-house paint and service workshop—machines are optimized both technically and aesthetically ✅ Pan-European delivery—provided by our skilled drivers ✅ Operator training and on-site machine demonstration at handover ✅ Ongoing after-sales technical support—we stay connected post-purchase ✅ On-site viewing and test drives welcomed at our facility ✅ Hundreds of satisfied customers throughout Europe—become one of them today ✅ Financing options available—we collaborate with leading leasing providers ✅ Invoicing in EUR or PLN—as per your preference -- FOR SALE -- COMBILIFT C5000 – Four-Way Forklift Truck 📅 Year of manufacture: 2015 ⏱️ Operating hours: 4,963 h 🔋 Propulsion: GAS / LPG 📦 Load capacity: 5,000 kg 📏 Mast: Duplex – 4,000 mm lift height 🔩 Fork positioner – width: 1,350 mm | Forks: 1,200 mm 🛞 Superelastic tires – 100% condition 🧪 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, and ready for work 📐 Dimensions: - Lowered mast height: 2,600 mm - Total length: 2,500 mm - Overall width: 2,300 mm - Fork positioner width: 1,350 mm - Overall height: 2,950 mm -- Ideal for: -- 🏭 Narrow-aisle warehouse applications 🌲 Timber, steel, and pipe handling industries 📏 Handling long and bulky loads 🏗️ Both indoor and outdoor operations -- FT Logistics – Quality you can depend on. Service you can trust. --

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, working width: 750 mm, total width: 750 mm, total length: 750 mm, total height: 870 mm, DGUV certified until: 03/2027, type of input current: three-phase, overall weight: 110 kg, year of last overhaul: 2026, Turntable for seeds Fortune DT stainless steel version Shelf below for seed disc Kdsdsid Enwepfx Ampsk Machined mobile Connection 400V, 1 kW, 16A-CEE plug Used machine cleaned 6 months warranty Visit our large bakery machine center!

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, warranty duration: 3 months, type of cooling: air, welding current at 60% duty cycle: 285 A, welding current at 100% duty cycle: 270 A, welding current (min.): 5 A, welding current (max.): 400 A, For sale: Kemppi MasterTig MLS 4000 with 3 Months Warranty Steel – Stainless Steel Weldable Refurbished – Serviced – Tested 5-400 AMP 30% ED: 400A 60% ED: 285A 100% ED: 270A 400 Volt Gas-cooled 2/4 Step Pre gas Post gas Kdjdpfx Ameyk Tryopsk Up slope Down slope Stick option Including: 8 Meter Welding torch Earth work lead with clamp Gas hose Trolley Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.