Used Hidralmac Spotting Press for sale (13,678)

Condition: used, Year of construction: 1973, pressure 28 t distance between columns 510 mm dayligth 380 mm Ksdov Svc Tepfx Ablolt stroke 260 mm weight of the machine ca. ca. 750 kg

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Klsdpjy Tbvmsfx Ablet Weight: approx. 120 kg For further dimensions see pictures.

Condition: good (used), Year of construction: 2013, operating hours: 12,110 h, Just arrived Baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Kjdpfjy Twt Ujx Ablolt Manufacturer: Paal Type: Konti 325 G Year of manufacture: 2013 Operating hours: 12110 Pressing force: 100 t Drive power: 2 x 55 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 5-fold automatic Throughput at: 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, lightweight waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any guarantee or warranty.

Condition: good (used), Year of construction: 2021, operating hours: 245 h, functionality: fully functional, HSM V-Press 860 plus vertical baling press, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 245 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Kjdpsy Tvzdofx Ablolt Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any possible errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale takes place at our location, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Item: NO-2003-Dairy-Cheeseplant Complete Dairy Cheese Plant Consisting of: - 3 pc Damrow Double-O cheese vats volume 12.000 liter. 2650 x 4000 x H 3150 mm - 1 pc Gadan Prepress unit with cutting and filling curd to moulds. 2200 x 10.000 x H 2600 mm - 1 pc Gadan Final Cheese Press with moulds 280X340 mm 2700 x 9300 x H 1800 mm - 1 press stand for pre-presser 3100 x 3900 x H 3700 mm - 1 intermediate station 2200 x 2700 x H 3150 mm - 1 pc Unit to take out cheese from moulds. Klodpfxokzk Dds Abljt 550 x 2150 x H 1400 mm - 1 end station 1600 x 3260 x H 2750 mm Equipment has been running until week 10 and will be dismantled starting week 16-17 Can also supply Brine system. We can dismantle and pack complete plant in Container/Trucks See attached pictures and video

Condition: used, Punching force: 200 kN Thread, for example a 13 mm hole in 12 mm steel Klsdsrmudgopfx Ablot Viewfinder via handwheel Assortment of tools is included in the price

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available from June 2026 Klsdpfx Abey Ticzelst Bale press Presto HPK 50 BS, year of manufacture 2011, with Wirbulator and optional Horstmann chain belt conveyor Manufacturer: Presto Type: HPK 50 BS Year of manufacture: 2011 Drive: 30 kW Pressing force: 50 t Infeed opening: 1600 x 1050 mm (L x W) Channel cross-section: 700 x 1100 mm Infeed volume, max. 1.23 m³ Cycle time: 19 s Binding: 4-fold Throughput at 35 kg/cbm: 6 t/h 60 kg/cbm: 9.6 t/h 100 kg/cbm: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (L x W x H) Machine weight: approx. 12,000 kg Data for chain belt conveyor Manufacturer: Horstmann Type: PK 1100/11 Year of manufacture: 2011 Belt width 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Loading length approx. 3000 mm Rising section approx. 5000 mm Gooseneck approx. 1000 mm The press is still in operation and can be inspected under operating conditions. It will be available from the beginning of June 2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is possible, and may be withdrawn at any time. Inspections can be arranged by appointment. The sale is made against prepayment, ex works, without any warranty.

Condition: good (used), Baling press, Schleicher, 16 S – used - : Ex-works price: only €1,950 (net) Kjdpsyzcwhefx Abljlt Manufacturer: Schleicher Model: 16 S Serial number: 6150I1730E Year of manufacture: 20 Height: 2000mm / Width: 1500mm / Depth: 900mm Weight: 1,850kg 380V, 3-phase, 10.3 AMP, 4kW Condition: good Available: immediately Location: Husum Operating manual not available.

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Year of manufacture: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Ksdjyzcvwepfx Abljlt Available: immediately Location: Husum Operating manual available

Condition: used, Year of construction: 2010, total width: 2,080 mm, total height: 1,900 mm, total length: 2,440 mm, Colour: Grey Briquette press; Kljdpsxqdxcjfx Ablot Höcker Polytechnik BrikStar C 3-19-L 4.3kW, 400V 25kg/h Funnel volume 3m³ Oil tank 50l Dimensions; 2015x2360x1300mm, 830kg - Year: 2010 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 2440mm x 2080mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, total width: 1,700 mm, total height: 1,500 mm, total length: 1,200 mm, Colour: Grey Empty weight: 500 kg Price: On request - Details: - └ Description: Set consisting of briquette press with extraction - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: 2012 1140 - Transport dimensions: 1200mm x 1700mm x 1500mm (l x w x h) Ksdpoyy Rt Ujfx Ablelt - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Colour: Grey Empty weight: 800 kg Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Kjdpfxoxan Ute Ablslt

Condition: used, Year of construction: 1986, total length: 1,500 mm, total width: 1,450 mm, total height: 2,900 mm, Colour: Grey Kjdpfx Aeylb Edjblelt Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total length: 3,200 mm, total width: 1,500 mm, total height: 2,100 mm, Colour: Green Weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: Kljdpey Rrdcefx Abljt - Drive system: Conventional - Power [kW]: 11.0 - Press force [ton]: 100 - Max. working width [mm]: 3100 - Column gap [mm]: 2700 - Backgauge depth [mm]: 700 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3200mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1991, Colour: Grey High frequency press Brand: Italpresse Type: GB/13 Max pressure: 120T Pressing area 2500x1300mm Pressing height 200mm 6 cylinders diameter 90mm Speed 12m/min. Complete line with loading system, gluing machine, destacker and High frequency cabinet (separate for sale) Kljdewng Tmjpfx Abljt Machine needs some maintenance. Probably the PLC lost his parameters, and some small parts needs to be changed.  - Details: - └ Description: Exclusive High-frequency cabinet - Year: 1991 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 3,950 mm, total width: 1,500 mm, total height: 2,150 mm, Colour: Green Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Serial number: 19198 - Main motor power [kW]: 1.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3100 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 390 - Total stroke [mm]: 390 - Number of work zones [pcs]: 3 - Number of levels [pcs]: 3 - Plate material: Wood - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 80 - Total pressure [Ton]: 160 - Options: Disable partial cylinders - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3950mm x 1500mm x 2150mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information Klodpfey Rq Efsx Ablet VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Kjdpfjy R Nnfex Ablslt Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Ksdpfx Abswrza Aolslt Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg

Condition: good (used), Year of construction: 2005, power: 15 kW (20.39 HP), operating speed: 10 mm/s, total length: 4,000 mm, total width: 2,000 mm, total height: 3,000 mm, overall weight: 11,500 kg, controller manufacturer: Delem DA65, working width: 3,100 mm, bending force (max.): 175 t, distance between stands: 2,550 mm, control type: CNC control, number of axes: 5, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 175T Beam stroke: 225mm Table Width: 150mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Kodpjyvz H Rsfx Abljlt Number of controlled axis: 5 Control: yes Crowning: yes Hydraulic toolclamping: yes Power: 15kW Length: 4000mm Width: 2000mm Height: 3000mm Weight: 11500kg

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Ksdpfx Ajvwcdusblslt Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Year of construction: 2010, condition: good (used), Make: Hegenscheidt MFD Type: PR 250 / 1000 Control: Siemens TOUCH Year: 2010 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Specifications Metric US Standard Centre height Kljdpfx Abokvnggjlet 550 mm Max. wheel tread Ø 1100 mm Max. wheelset length 2500 mm Max. pressing force 250 T Max. cylinder stroke 500 mm Cylinder Ø 300 Working speed 10 - 80 mm/min. Pinole feed 1300 mm/min. Return speed 1300 mm/min. Dimensions (Estimate) Length 6100 mm Width 5730 mm Height 3750 mm Weight 15900 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Kljdpfjwp Nv Hex Ablet Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Kledpfx Abskvmi Sjlot Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Kedpfxjx Sxuko Ablslt Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating hours: 100 h, stroke length: 800 mm, operating speed: 9 mm/s, controller manufacturer: CADMAN TOUCH, working width: 12,000 mm, bending force (max.): 1,600 t, back gauge: 1,000 mm, distance between stands: 10,600 mm, control type: CNC control, number of axes: 15, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front Kljdpfsygkuwjx Ablet 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!