Used Fezer Vacuum Lifting Device for sale (33,073)

Condition: used, Year of construction: 2018, functionality: fully functional, Helium leak detection device. Hsdpfxsyt Sm Uj Ah Rjnn

Condition: used, used, good conditionmake Fezertype vacuum power 20 mbar / 0.37 kWstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as is, as viewed,without guarantee and warranty Hnsdpfxovwfn Nj Ah Rsn

Condition: excellent (used), functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular Vacuum Pump, PM P02 420 C, TMH 520 Model: PMP02420C Type: TMH520 Condition: Used Hnsdpjxpu Sqefx Ah Rsn

Condition: used, A 124H, F4HE4CL06611010, Pfeiffer Vacuum, vacuum pump, SN:AP8086636 Model: A 124H Hnsdpfet Iggwjx Ah Ren Type: F4HE4CL06611010 Condition: Used

Condition: used, 800040V1444, TURBOVAC T1600, Oerlikon Leybold turbomolecular pump Model: 800040V1444 Type: TURBOVAC T1600 Condition: Used Note on condition: Hjdpferf U Trex Ah Rsnn free of contamination

Condition: used, A 124H, F4HE4CL06611010, Pfeiffer Vacuum, vacuum pump, SN:AP8086635 Model: A 124H Hsdpfevrgacex Ah Rsnn Type: F4HE4CL06611010 Condition: Used

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Hnedpfxevrzaks Ah Rsn Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.

Condition: excellent (used), functionality: fully functional, Model: TMBBB662005A Pump Model: TMB10662005A Pump Type: ADIXEN ATH2303M Controller Model: 123744 Controller Type: OBCV4 PROF IP54 Firmware: Vi 3.01.00 / Vv 1.08.02 / Vm 3.11 Hodpfxex Ap I Ts Ah Renn Year of Manufacture: 2018/2019 Operating Hours Pump: approx. 25,000 h

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. Hjdpfx Ahjx Aqa Dj Ronn DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum.

Condition: as good as new (ex-display), 844224V0002 + 400000250 + 400000801, COOLVAC 1500 + RGD 7/25 / COOLVAC 1500 + RGD 7 25 / COOLVAC1500 + RGD725, Oerlikon Leybold vacuum cryopump - as good as new Model: 844224V0002 + 400000250 + 400000801 Type: COOLVAC 1500 + RGD 7/25 Condition: as good as new Hsdoq S Twgepfx Ah Rjnn

Condition: as good as new (ex-display), 844224V0004 + 400000250, COOLVAC 1500 / COOLVAC1500, Oerlikon Leybold vacuum cryopump - as good as new Model: 844224V0004 + 400000250 Hnodpfx Ahsh Igffo Rjn Type: COOLVAC 1500 Condition: as good as new

Condition: excellent (used), functionality: fully functional, saw blade diameter: 700 mm, saw drive: 7,500 W, operating pressure: 6 bar, disc diameter: 700 mm, Large size carpenter industrial cutting circular saw. Powerful engine: 7,5Kw. 380V. Hnedpfev Ic Iusx Ah Rsn Forward and backward movement is pneumatic. Height adjustment is electric. La diameter: 700mm.

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 300 Hsdpeul T Icjfx Ah Rsnn Width: 180 Height: 200 Electric power: 7.5 kW

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm Hnjdpfx Aotddw Aeh Ren - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. Hedpfx Ahezcwito Ronn System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.

Condition: excellent (used), Gernal vacuum tumbler. 2,000 litres, fully programmable. Immaculate condition. Hnodpox R N Ulofx Ah Rjn

Condition: good (used), 750 litre vacuum cutter direct from Bankrupt meat-free factory. The machine was rebuilt and only used for a short time before the company went Bankrupt. Hjdpfx Aex N Nlzoh Renn

Condition: used, Year of construction: 2016, REF: MM6451 1 x Edmolift UK Limited TL1000XB hydraulic scissor lift. Serial no. 119233. Hedpfxezcb Rzo Ah Rsnn Date of manufacture – 2016. All equipment to be removed from the factory by the Buyer.

Condition: like new (used), Year of construction: 2025, Brand new MV600 vacuum tumblers available for immediate sale. Three available at the moment. Perfect machines for marinating meats, barbecue products, meat free products and mixing cereals, muesli etc. We also have smaller MV300 units in stock. Hedpjxvt Ikjfx Ah Rjnn

Condition: good (used), 1 x Vemag Robot DP 10 vacuum filler with loader. Hnedjwb Hihspfx Ah Rjn Located in Melksham Wiltshire

Condition: good (used), Translyft Rotary table scissor lift Hedpoulz Epsfx Ah Renn Translyft 3Tonne hydraulic scissor lift with rotary table, table diameter 1300mm, mounted on weigh cells with a scale, 3Ph

Condition: excellent (used), Year of construction: 2004, Lovely Busch RA 0630 vacuum pump which has just come out of a closed factory. Mounted on its own stainless platform and has a control panel fitted. Looks much newer than 2004. Hjdei Exf Aspfx Ah Ronn

Condition: used, loading : max. 50 to 55% (± 1.800 kg) all stainless steel Lutetia control adjustable speed (frequency inverter) 2 main motors (6,6 kW) dimensions (l x w x h) : ± 3.500 x 1.500 x 2.000 mm loading height : ± 1.150 mm weight 1.400 kg Hjdpfx Ahjzc E Tme Ronn vacuum pump not included

Condition: used, loading : max. 2.800 kg (depending on the product) all stainless steel vacuum pump not included suitable for cooling PLC control adjustable speed tilting system to discharge Hnjdpfxezcwcge Ah Rsn 1 water filter dimensions (l x w x h) : ± 3.490 x 1.820 x 2.250 mm power: 5,9 kW

Condition: new, Year of construction: 2026, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, overall weight: 1,550 kg, Equipment: CE marking, documentation/manual, This CNC router is designed to deal with furnishing and 3D milling of any shape or form you want. It has a rotary device that allows you to make balusters, stair posts, and other structures. Wattsan CNC milling machine for medium or big production is simple to operate and will provide reliable results. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. It’s perfect for the furniture industry. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Hnjder D Nmkjpfx Ah Ron Wattsan M1 1325 RD machine characteristics: Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2700x 3380x1780mm Weight: 1350 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.