Used Erba Evp-A 550 Rundvibrator Mit Separierung for sale (71,337)

Condition: excellent (used), axle configuration: 3 axles, first registration: 06/2016, total length: 13,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65/22.5, wheelbase: 9,970 mm, color: blue, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - Disc brakes = Further information = Axle configuration Tire size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Tire tread left: 30%; Tire tread right: 30% Weights Unladen weight: 7,362 kg Dwjdpfx Aaoyzqqpj Dea Payload: 31,638 kg Gross vehicle weight (GVW): 39,000 kg Condition Technical condition: very good Visual condition: very good Further information Please contact Bas Wolfs or Bas Wolfs for more information.

Condition: excellent (used), Buderus GE315/200kw low-temperature boiler with oil burner Dsdpfewauarox Aa Dswa

Condition: excellent (used), Viessmann Vitoplex 120 kW. Low-temperature boiler with oil or gas burner. 1.0-9.5 Dodpfexgnx Sjx Aa Dewa

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Dwsdsq Am Ivepfx Aa Dja

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Dwodewauaxjpfx Aa Doa

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. Dodsyxr T Topfx Aa Dswa The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: excellent (used), I am offering a professional LUKAS LZR 12/550 hydraulic rescue cylinder, used by fire brigades and in technical rescue operations. This equipment is from the renowned German brand LUKAS, designed for rescue work during road accidents and technical operations – very robust and durable construction. Condition: The item is used. Normal signs of use are visible (scuffs, worn label – see photos). Technical condition is unknown – sold as untested / for inspection. Technical data (from markings): Model: LZR 12/550 Dwjdpsyxtabefx Aa Dea Manufacturer: LUKAS (Germany) Type: hydraulic cylinder / spreader Application: technical rescue, hydraulic power Equipped with working tips Set includes: LUKAS LZR 12/550 hydraulic cylinder Mounting element as shown in the photos Applications: Fire brigades (voluntary and state) Road rescue operations Technical and maintenance work Can also be used in hydraulic power applications.

Year of construction: 2022, condition: like new (used), Magnetic filter: Suspension height: 360 mm Magnet dimensions (W x L): 90 x 92 cm Suitable for belt width 1000 mm Djdsyftf Aopfx Aa Dewa Air cooled

Condition: new, Year of construction: 2026, Machine type: ESA 15 Manufacturer: ERBA Power (kW): 3.37 Sludge basket volume: 15 L Description: The ERBA ESA 15 circulation centrifuge (Patent No.: 201606464) is a professional stand-alone unit for the treatment of process water for vibratory finishing systems. It features a wastewater tank with agitator as well as a clean water tank and is capable of producing up to 600 L of fresh water per hour. Contaminant particles are separated from the process water using centrifugal force of 1500 g and removed as solid cake. The machine is easy to operate thanks to the programmable logic controller (PLC) with touchscreen interface. The ESA 15 also stands out for its compact design, making it extremely space-saving. As an experienced partner, we provide you with expertise in all areas relating to vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The stated price is net, excluding the currently applicable statutory VAT and shipping costs. Some images may show the system including optional accessories, which are available separately and may incur additional charges. The listed price refers to the base machine only. If you are interested, please do not hesitate to contact us. We will be happy to advise you, without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). Dwodpfxjyq Rd To Aa Dja This offer is for online presentation purposes only. Contract negotiations take place via telecommunication (email, phone, messaging platform). In the first instance, we will provide you with a non-binding offer, along with our general terms and conditions (including legal notice) and information about your right of withdrawal, prior to the conclusion of any purchase or contract.

Condition: new, Year of construction: 2026, The ERBA Vibratory Finishing Bell TAM 220 is perfectly suited for surface finishing of very small, thin, or delicate parts, but is also ideal for movable and solid components such as chains. It is equipped with a frequency inverter for stepless adjustment of the motor speed, a digital process timer, and a dosing pump. Thanks to variable speed control, the machine delivers the required precision and is particularly suitable for extended processing times without operator intervention. Technical specifications: - Gross volume: 220 L - Motor power: 2.2 kW - Weight: 475 kg - Motor speed: 0 to 45 rpm As an experienced partner, we provide expertise in all aspects of vibratory finishing. We collaborate with you to develop efficient solutions for optimal process results. Dsdpfsyq Rhfsx Aa Dswa All prices are net plus the currently applicable statutory value-added tax and shipping costs. Accessories shown in the images may be optional and subject to additional charges. If you are interested, we look forward to your enquiry. We will be happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, during which we will also inform you of our general terms and conditions including our legal notice and the right of withdrawal, before the purchase/contract conclusion takes place.

Condition: new, Year of construction: 2026, The ERBA Separation Conveyor YE-60 is designed for separating workpieces and grinding media. It can be used as a mobile standalone machine or in combination with other machines, such as the ERBA Turbo (centrifugal system). The separation bed can be quickly and easily replaced to suit various requirements. An optional frequency inverter can be installed, allowing stepless adjustment of the motor speed. The YE-60 can be equipped with many optional features to simplify the separation process, such as a magnetic separator for small parts, a wash nozzle, or a parts hopper. Technical Data: - Gross volume: 60 liters - Motor output: 0.3 kW - Weight: 140 kg - Screen area dimensions: 1,000 x 500 mm - Installation dimensions: 1185 x 540 x 575 mm (L x W x H) As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together, we develop efficient solutions tailored to your optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may show the system including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to offer advice with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). Dsdpfx Aaeyq Rhrs Djwa This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, telephone, message portal). In the first step, we will send you a non-binding offer, together with information about our general terms and conditions with imprint and the right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: Turbo 8 Manufacturer: ERBA Power kW: 0.37 Total volume: 8 l Description: The ERBA Turbo 8 is an entry-level centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces in a short process time. The machine is equipped with a digital process timer and a digital speed display. The disc speed can be adjusted via a frequency converter. Dwodeyq Rdmspfx Aa Dea The Turbo 8 is available in both dry and wet versions. As your experienced partner, we provide comprehensive expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. The stated price is net, plus applicable statutory VAT and freight costs. The system may be shown in the pictures with accessories that are optionally available and subject to additional costs. The stated price refers to the base machine only. The photos serve as examples. The actual appearance and dimensions may differ from those shown. If you are interested, please feel free to contact us. We are happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR). This offer serves exclusively as an online presentation of our products. Contractual negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, providing you with our general terms and conditions (including company imprint) and revocation policy before a purchase or contract is concluded.

Condition: new, Year of construction: 2026, Machine type: Turbo 20 Dedpeyq Rciofx Aa Djwa Manufacturer: ERBA Power kW: 1.1 Total volume: 20 L Description: The ERBA Turbo 20 is a centrifugal finishing system designed for deburring, smoothing, and polishing small to medium-sized workpieces with short process times. The machine is equipped with a digital process timer and a digital speed display. The disc speed can be adjusted via a frequency inverter. The Turbo 20 is available in both dry and wet versions. It can be integrated into a production line with a separation section. As an experienced partner, we provide comprehensive expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. The listed price is net, plus the currently applicable VAT and freight costs. The images may include accessories that are optionally available and subject to an additional charge. The stated price refers to the base machine. Photos are for reference only; actual appearance and size may differ from the images. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which includes information about our general terms and conditions, imprint, and the right of withdrawal before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: YE 200 Manufacturer: ERBA Power kW: 2 x 0.3 Total volume: 200 l Description: The ERBA Separation Unit YE 200 is designed for separating workpieces from grinding media. Two motors provide the necessary movement for the sieve. Dodpeyq N Epsfx Aa Djwa The YE 200 can be used either as a standalone machine or in combination with other units, such as the ERBA Turbo (centrifugal system). The separation screen can be quickly and easily changed according to requirements. Optionally, a frequency inverter can be installed, allowing for stepless adjustment of the motor speed. As your experienced partner, we offer comprehensive expertise in vibratory finishing processes. Together with you, we develop efficient solutions to achieve optimal results for your processes. The price listed is net, plus the applicable statutory VAT and shipping costs. The images may show the unit including optional accessories that are available at extra cost. The price quoted refers to the basic machine only. The images shown are for illustrative purposes only; actual appearance and size may vary. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, phone, messaging portal). As a first step, we will send you a non-binding offer, which will also include our general terms and conditions, legal notice, and information on the right of withdrawal, prior to any purchase/contract conclusion.

Condition: new, Year of construction: 2026, Machine Type: EVT 80 Manufacturer: ERBA Power kW: 0.75 Total volume: 80 L Description: The EVT 80 long-tank vibratory finishing machine from ERBA is equipped with a durable, hot-cast polyurethane lining. Emptying and separation are carried out via bottom discharge (manual/pneumatic). Removable dividers allow the process tank to be partitioned into compartments for individual processing of parts. The machine is fitted with an electrical control cabinet and can be optionally equipped with a fully automatic PLC process control system. For higher loads, reinforced suspension and a strengthened motor can be installed upon request. The motor speed can be continuously adjusted by means of a frequency inverter (optional). Dedpjyq Rbljfx Aa Dewa As an experienced partner, we provide expert knowledge in the field of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The price indicated is net, plus the applicable statutory VAT and shipping costs. Accessories shown in the images may be optional and subject to an additional charge. The price quoted refers to the basic machine. The photos are sample images—the actual appearance and size may differ from those pictured. If you are interested, we look forward to your inquiry. We will be happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR). This listing is for presentation purposes only. The contract negotiation is conducted via telecommunication (email, phone, messaging platform). In the first step, we will send you a non-binding offer, along with our general terms and conditions, legal notice, and revocation instructions before any sale or contract conclusion takes place.

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet version). The disc speed can be adjusted via a frequency inverter. The Turbo 60 is available in both wet and dry versions. It can be ideally linked with the ERBA YE-60 separation conveyor shown in the images. Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Disc speed: 75 to 300 rpm - Optionally equipped with tilting motor, soundproof lid, or separation box As an experienced partner, we provide you with expertise in the field of vibratory finishing. Together, we develop efficient solutions for your optimal process results. All prices are net plus the applicable VAT and shipping costs. The pictures may show the system with accessories that are available optionally and subject to additional charges. Dwodpfsyq Rhlex Aa Doa If you are interested, we look forward to hearing from you. We are happy to provide you with advice without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer is solely intended as an online presentation of our goods. The contractual negotiation takes place via telecommunication (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which includes information about our general terms and conditions, legal notice, and the right of withdrawal, before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVT 130 Manufacturer: ERBA Power kW: 1.1 Dwodpfxjyq Ra Ij Aa Dea Total capacity: 130 l Description: The EVT 130 long trough vibratory finishing machine from ERBA is equipped with a durable, hot-cast polyurethane lining. Discharge or separation is performed via a bottom discharge (manual/pneumatic). The working tank can be subdivided into compartments with the use of partition plates, allowing for individual processing of parts. The machine features an electrical control cabinet and can optionally be equipped with a fully automatic PLC process control system. On request, reinforced suspension and a more powerful motor can be installed to accommodate higher loads. The motor speed can be infinitely adjusted via a frequency inverter (optional). As an experienced partner, we offer you expertise in all aspects of vibratory finishing. We work with you to develop efficient solutions for your optimal process results. The stated price is net, plus the currently applicable statutory VAT and plus freight costs. The images may show the machine with accessories, which are optionally available and subject to additional charges. The stated price refers to the basic machine. The pictures are sample photos; actual appearance and dimensions may differ from the images. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer solely serves to present our goods. Contract negotiations are concluded via telecommunication (email, telephone, message portal). Initially, we send you a non-binding offer, along with information on our general terms and conditions including legal notice and right of withdrawal, before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVT 400 Manufacturer: ERBA Power kW: 4.0 Total volume: 400 liters Description: The EVT 400 long trough vibratory finishing machine from ERBA features a robust, hot-cast polyurethane lining. Discharge or separation is carried out via a bottom drain (manual/pneumatic). Removable dividers allow the work tank to be partitioned into compartments for individual processing of parts. The machine is equipped with an electrical control cabinet and can be optionally fitted with a fully automatic PLC process control system. Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted via frequency inverter (optional). As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net, plus the currently applicable statutory VAT and freight costs. The photos may show the system including accessories, which are optionally available and subject to additional costs. The quoted price refers to the base machine. The photos are for illustration purposes only. The actual appearance and dimensions may differ from those shown. If you are interested, we look forward to your inquiry. We are happy to advise you without obligation. Dwodpfxeyq N D Ee Aa Dea The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely to present our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging platform). The first step will be to send you a non-binding offer, which will also include information about our general terms and conditions, legal notice, and right of withdrawal before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: BPT 1000 Manufacturer: ERBA Power: 2 x 5.5 kW Total volume: 1,000 L Description: The ERBA BPT 1000 twin-motor long trough vibratory finishing machine is ideal for ball polishing or processing heavy workpieces. Thanks to its two motors, it can handle even particularly heavy media loads and applies the necessary pressure to the workpieces. It is equipped with a durable hot-cast polyurethane lining. Emptying or separation is performed via a bottom outlet (manual/pneumatic). The process chamber can be partitioned using removable dividers, allowing for individual processing of parts. The machine comes with an electrical control cabinet and can optionally be fitted with fully automatic PLC process control. The motor speed can be infinitely adjusted by means of a frequency converter (optional). As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The listed price is net, plus the currently applicable statutory VAT and freight costs. The pictures may show the system including optional accessories, which are available at additional cost. The quoted price refers to the base machine. The photos are for illustrative purposes. Actual appearance and size may differ from the images. If you are interested, we look forward to hearing from you. We are happy to provide you with a consultation, with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). Dedpfxeyq Rcpe Aa Dswa This offer is for presentation purposes only. Contract negotiations take place via telecommunication (Email, phone, messaging portal). Initially, we will send you a non-binding quote, along with our general terms and conditions including imprint and information on the right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, The ERBA Turbo 120 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine is equipped with a digital process timer, a digital speed display, and a dosing pump (wet version). The plate rotation speed can be adjusted via frequency converter. The machine also features a tilting motor for unloading. The Turbo 120 is available in both dry and wet configurations. Technical data: - Gross volume: 130 L - Drive power: 4.0 kW Dsdpfx Asyq Rdaea Dswa - Plate speed: 80 to 170 rpm - Optionally available with sound insulation cover, separation deck, or separation box As an experienced partner, we provide expertise in all aspects of mass finishing. Together with you, we develop efficient solutions to achieve optimal process results. All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may show the machine including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to your enquiry. We are happy to provide you with advice free of charge and without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This listing serves only as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also include our general terms and conditions with imprint and information on the right of withdrawal, before any purchase or contract is concluded.

Condition: refurbished (used), and Fed Platen Erba model Titan 3 with automatic ZENARI feeder: size 80/120, Picard plate, counter, automatic lubrication, 3 operating modes (continuous, single, and timed), Automatic ZENARI feeder. All safety features. Dwjdpfx Aezc Ek Soa Dsa Completely rebuilt to like-new condition.

Condition: used, empty load weight: 8,800 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2006, suspension: air, tire condition: 80 %, load capacity: 30,200 kg, • Volume 49 m³ Dwsdjyzkl Topfx Aa Dsa • 1st axle liftable • Side unlocking • Catwalk • Internal dimensions 10.45 x 2.36 x 1.96 m

Condition: used, empty load weight: 8,800 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2006, suspension: air, tire condition: 80 %, load capacity: 30,200 kg, • Volume: 49 m³ • 1st axle liftable Dwedpfx Aaoyu U Uqj Dja • Side unlocking • Catwalk • PVC storage box • Internal dimensions: 10.45 x 2.36 x 1.96 m

Condition: used, Westtech Woodcracker C550 Immediately available Equipment: - Collecting grapple - Endless rotating tiltator - Autospeed function - Cutting diameter for softwood: 600 mm - Cutting diameter for hardwood: 550 mm - Grapple opening width: 1,600 mm - Shear opening: 900 mm - Hydraulic flow rate: 100–190 l/min - Hydraulic flow for auxiliary functions (e.g. rotation): 50–70 l/min - Recommended operating pressure: 280 bar - Carrier vehicle service weight: 24–30 t Dwsdpfx Aeyfu E Rja Dea - Integrated Multigrip Also available from stock with Powertiltator! Adapter plates available on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We can supply the complete range of Westtech Woodcracker products for you! Rental possible = Additional information = New: Yes Please contact Tobias Ebert for further information.

Condition: ready for operation (used), Year of construction: 2005, X-axis: 505mm, y-axis: 405mm, z-axis: 405mm, number of M8 threaded holes: 9, max. workpiece height: 545mm, max. table load: 180kg, accuracy: ISO 10360-2, resolution: 0.1µm, guide system: air bearings on all axes, traverse speed CNC mode: 8-300mm/s (max. 520mm/s), joystick rapid traverse: max. 80mm/s, slow: 0.05mm/s, measuring speed: 1-8mm/s (CNC), acceleration: 0.13g (max. 0.23g), measuring table material: granite, table dimensions: 638x860mm, compressed air consumption: approx. 50l/min at 0.4MPa, length: 1122mm, width: 1082mm, height: 2185mm, weight (incl. table and control): 515kg. An on-site inspection is possible. Dwsdpfx Asy Duq Eja Doa