Vibratory finishing machine
ERBA EVT 80 Langtrogvibrator

Name: ERBA EVT 80 Langtrogvibrator
Brand: ERBA
Availability: InStock

Year of construction

2026

Condition

New

Location

Wesel

Vibratory finishing machine ERBA EVT 80 Langtrogvibrator

Show map

Machine data

Machine type:: Vibratory finishing machine

Manufacturer:: ERBA

Model:: EVT 80 Langtrogvibrator

Year of construction:: 2026

Condition:: new

Price & Location

Location:: Alte Gärtnerei 32, 46487 Wesel, Deutschland

Rental:: is possible

Call

Details about the offer

Listing ID:: A21426217

Update:: 04.03.2026

Description

Machine Type: EVT 80
Manufacturer: ERBA
Power kW: 0.75
Total volume: 80 L

Description:
The EVT 80 long-tank vibratory finishing machine from ERBA is equipped with a durable, hot-cast polyurethane lining. Emptying and separation are carried out via bottom discharge (manual/pneumatic). Removable dividers allow the process tank to be partitioned into compartments for individual processing of parts. The machine is fitted with an electrical control cabinet and can be optionally equipped with a fully automatic PLC process control system. For higher loads, reinforced suspension and a strengthened motor can be installed upon request. The motor speed can be continuously adjusted by means of a frequency inverter (optional).

As an experienced partner, we provide expert knowledge in the field of vibratory finishing. Together with you, we develop efficient solutions for optimal process results.

The price indicated is net, plus the applicable statutory VAT and shipping costs. Accessories shown in the images may be optional and subject to an additional charge. The price quoted refers to the basic machine. The photos are sample images—the actual appearance and size may differ from those pictured.

Itedpfx Amoyq Rble Ief
If you are interested, we look forward to your inquiry. We will be happy to advise you without obligation.

The European Commission provides a platform for online dispute resolution (ODR).

This listing is for presentation purposes only. The contract negotiation is conducted via telecommunication (email, phone, messaging platform). In the first step, we will send you a non-binding offer, along with our general terms and conditions, legal notice, and revocation instructions before any sale or contract conclusion takes place.

The listing was translated automatically. Translation errors are possible.

Documents

21426217-01.pdf

Seller

Last online: A week ago

Registered since: 2023

25 listings online

Call

Send inquiry

Telephone & Fax

+49 2803 ... show

These listings may also fit your interest.

Listing

Minibus FIAT Fiorino III 2007 - Fiorino furgone 1.4 73cv

Castel S. Pietro Terme BO

1,753 km

Minibus
FIATFiorino III 2007 - Fiorino furgone 1.4 73cv

€1,000

Fixed price plus VAT

Call

Listing

Sankt Daniel

1,690 km

Powered tools VDI 40

Call

Listing

Dortmund

1,087 km

Driven toolholder
NACKE + WTOVDI 50

Call

Condition: good (used), The powered tools listed here with VDI 50 interface are designed for a SAUTER tool changer and are in good condition as well as fully functional. They were previously used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight version, brands NACKE and WTO, VDI 50 for SAUTER-brand tool turret: Item No.: XVI 24275 1 drilling/milling unit, straight version, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT. Item No.: XVI 24277 1 drilling/milling unit, straight version, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Itedpobql S Hefx Am Iof Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling unit, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

See details

Listing

Sludge filter system in sea container JUNGHANS

Chemnitz

1,469 km

Sludge filter system in sea container
JUNGHANS

Call

Year of construction: 2011, condition: good (used), Offer 24370 Technical data: - Sludge filter press JUNGHANS with cylinder unit + conveyor belt - Flocculation unit - pumps - Switch cabinet with electrical equipment - Aluminum water collection tray in the complete container floor - Lighting system - Sea container with 4 doors - Space requirement approx. W 6.0 x H 2.4 x D 2.4 m - Weight approx. 5000 kg - Separate conveyor belt L 8.0 m Iodst Srkpjpfx Am Istf

See details

Listing

Vibratory Surface Finishing Machine ZTV250 Trough type vibratory machine

İkitelli OSB

3,072 km

Vibratory Surface Finishing Machine
ZTV250 Trough type vibratory machine

Call

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) Iedpfx Amsh I N Udj Iotf * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included

See details

Listing

Round vibratory Vibra-Line B60M Pers Group Vibra - Line B60M

Vejle

1,177 km

Round vibratory Vibra-Line B60M
Pers GroupVibra - Line B60M

Call

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: PG20240001, total height: 910 mm, overall weight: 110 kg, total length: 830 mm, total width: 830 mm, type of input current: three-phase, workpiece weight (max.): 45 kg, tank capacity: 60 l, usable tank capacity: 15 l, input voltage: 400 V, workpiece width (max.): 160 mm, workpiece height (max.): 160 mm, outer diameter: 160 mm, workpiece length (max.): 160 mm, inner dimension height: 245 mm, inner dimension width: 280 mm, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, warranty duration: 12 months, empty load weight: 110 kg, load capacity: 60 kg, Vibratory finishing machine for universal use for deburring and polishing. Suitable for small parts and series. Vibra-Line B60M circular vibrator with 60 l. Volume. The machine is coated with 20 mm. PU coating (polyurethane). With a capacity of 60 litres, the work bowl can hold up to 15 litres of workpieces and approx. 45 kg of sanding medium, depending on the design and size of the individual parts. Isdjvgagxspfx Am Ijtf The basic model of the ‘Vibra-Line B60M’ is equipped with a control cabinet with mechanical timer and process time control.

See details

Listing

Bench testing machine up to 2.5 kN ZwickRoell BZ2.5/TN1S

Borken

1,034 km

Bench testing machine up to 2.5 kN
ZwickRoellBZ2.5/TN1S

€6,823

Fixed price plus VAT

Call

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table testing machines Tensile strength measuring machine Area of application: Wide range of applications, from plastic and elastomer testing to paper, textile, foam and wire to component testing. Load frame: Max. test force FN in tension/compression direction 2.5 kN Height (h1) approx. 770 mm Width with electronic unit 320 mm Depth with electronic unit 414 mm Height of the work area h min ... h max: Traverse angle mounted upwards 227 ... 573 mm Traverse angle mounted rotated by 180° 57 ... 403 mm (each without connection bolt) Connection values: Electrical connection 115/230 V 4/2A-1PH/PE/N Power consumption 0.4 kVA Mains frequency 50/60 Hz Ijdpfsfnm Dqsx Am Ietf 2.5 kN Condition: used Scope of delivery: (see image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

See details

Listing

Borken

1,034 km

Table machines
ZwickRoellBZ1,0 / TH1S

€6,700

Fixed price plus VAT

Call

Condition: good (used), Zwick Type: BZ1.0 / TH1S Iedpfx Amsddante Iotf Zwick table testing machines Zwick with a maximum force of 1.0 kN. The course of the traverse: 1150 mm. Testing speed: 0.1 ... 1800 mm / min Scope of delivery. (See pictures) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

See details

Listing

Tool holder mazak/sandvik/mimatic/gerardi VDI 40 VDI 40

's-Hertogenbosch

933 km

Tool holder
mazak/sandvik/mimatic/gerardi VDI 40VDI 40

Call

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 euro 2640 total 3x driven tools vdi 40 euro 580/pc Iedpfx Amovry T Ns Ijtf 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

See details

Listing