Used Cantilever Structure for sale (3,155)

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in internal company transport. Combined Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: 16 t at 6 km/h with evenly distributed loading (area load) of the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covering made of softwood planks, all-round edge protection. Steering: Four-wheel stub-axle steering, drawbar tiltable, removable, and can be repositioned from front to back, coupling height at the towing vehicle approx. 320 mm (other coupling heights only permitted upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar drop protection according to UVV. Laedpfx Afexrtdqokjf Chassis: Both axles steered, solid rubber elastic tyres approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 Ultramarine Blue. Optional Equipment: - 2 lashing rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Condition: excellent (used), total length: 4,100 mm, total width: 2,100 mm, total height: 560 mm, color: blue, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Lasdpfx Afjxrtgfokof Operating Conditions: The trailer is designed for use on flat, paved roadways in internal company transport operations. Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Main Frame: Robust welded construction made of profile steel sections. Loading Area: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, equipped with phenolic resin-coated plywood panels. Bumpers at the ends of the frame. Steering: Four-wheel pivot steering, drawbar tiltable, non-reversible, and non-removable. Drawbar automatic safety lock according to UVV regulations. Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearing and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Miscellaneous: - Collision guards at the frame ends made of drop-shaped half-shells. - All-round anti-slip protection, approx. 25 mm high. - Side underrun protection at the height of the diagonal bar. - Pin coupling with captive bolt, bolt with spring safety, diameter 30 mm at the rear end. - Double-acting wheel chock with chain. - Two rear reflectors at the rear end. - Prepared for roof structure.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, carrying capacity per cantilever arm: 900 kg, load capacity: 3,600 kg, shelf height: 5,585 mm, total length: 14,000 mm, total width: 2,720 mm, total height: 5,585 mm, axle spacing: 1,400 mm, clearance between the columns: 1,400 mm, load capacity per stand: 900 kg, shelf length: 14,000 mm, Equipment: double-sided, DOUBLE-SIDED CANTILEVER RACK IN STEEL, PAINTED RAL 5015, FOR INDOOR USE, OHRA K60K SYSTEM. USED MATERIAL SOLD AS SEEN. Laedpfeygddfsx Afkjf COMPRISED OF: - 06 uprights and IPE240 bases, height 5585 mm, max load per upright 3600 kg - 03 uprights and IPE220 bases, height 4985 mm + extensions, max load per upright 3600 kg - 02 uprights and IPE220 bases, height 4285 mm, max load per upright 2700 kg Rack total length: 14,000 mm. Total width: 2,720 mm, or 2,750 mm with L-shaped guide rails. 88 adjustable arms with hooks, length 1,250 mm, load capacity 900 kg each. INCLUDES cross bracing, connector hooks, and bolts (EXCLUDES floor anchoring bolts). Solid steel L-profile guides, approx. 30 linear meters. Material is dismantled, palletized, tied, and packed, ready for transport. Transport and VAT not included in the price.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, carrying capacity per cantilever arm: 900 kg, load capacity: 4,474 kg, shelf height: 5,585 mm, total length: 12,600 mm, total width: 2,720 mm, axle spacing: 1,400 mm, clearance between the columns: 1,400 mm, maximum load weight: 900 kg, load capacity per stand: 900 kg, Equipment: double-sided, Double-sided cantilever rack in painted steel, RAL 5015, for indoor use, OHRA H60K system. Used material, sold as seen and liked. Composed of: 5 columns and bases IPE240, height 5585 mm plus extensions (total height approx. 7000 mm), 3 columns and bases IPE220, height 4985 mm plus extensions (total height approx. 5500 mm), 2 columns and bases IPE220, height approx. 4285 mm. Rack length: 12,600 mm; width: 2,720 mm, with L-shaped rails at 2,750 mm. Includes 110 adjustable arms with hooks, length 1,250 mm, load capacity 900 kg per arm. Complete with bracing, connecting hooks, and bolts (excluding floor anchoring). L-shaped perforated steel guide approx. 30 meters. Lasdeygmz Hjpfx Afkjf Material is disassembled, strapped, and ready for transport (transport at buyer’s expense). Transport and VAT not included in the price.

Condition: new, Year of construction: 2026, input voltage: 230 V, input current: 5 A, input frequency: 50 Hz, cutting height (max.): 305 mm, control type: manual, actuation type: manual, rotational speed (max.): 1,420 rpm, rotational speed (min.): 1,420 rpm, overall weight: 19 kg, torque: 5 Nm, cable length: 4,000 mm, saw band length: 1,710 mm, mobility: mobile, Equipment: CE marking, documentation/manual, motor brake, PBS300 TITAN – 300 mm Cutting Capacity The PBS300 TITAN is a professional portable bandsaw designed for processing large structural timber sections up to 300 mm. The machine combines high cutting capacity with a compact and lightweight construction, making it suitable for carpenters, timber frame builders and woodworking companies that require a mobile solution for cutting large wooden elements. Despite its compact size, the PBS300 TITAN provides stable cutting performance in thick structural timber. Well-adjusted machines can cut timber sections up to maximum thickness without noticeable blade drift. The design focuses on rigid blade guidance, efficient manufacturability and practical usability in professional environments. Ledpfxov Tcuxe Afkeaf Key Features • Maximum cutting height: 300 mm • Designed for structural timber processing • Hybrid blade guide system (steel guides + bearings) • Precision-machined aluminum band wheels • Compact and portable design – 19 kg machine weight • Robust welded aluminum frame construction • Developed specifically for professional users Typical applications: • timber frame construction • carpentry workshops • log house building • structural timber processing Technical Specifications Cutting height: 300 mm Band wheel diameter: 203 mm Blade length: 1710 mm Blade width: 6–13 mm Guide table size: 420 × 310 mm Motor: asynchronous electric motor Power: 0.75 kW Speed: 1420 RPM Power supply: 230 V (single-phase) Protection class: IP54 Connection cable length: 4 m Machine weight: 19 kg Manufacturer Astra Pro Sp. z o.o. We manufacture machines for other companies as an OEM supplier. The PBS300 TITAN is our own model developed based on years of manufacturing experience in this niche market. More Information If you are interested in the machine, please contact us for technical details, pricing and delivery information.

Condition: like new (used), Almost new cantilever racks, single- and double-sided, available from stock. Loading marks may be visible on the system. Ledpoxcn Eksfx Afksaf Available quantity: 20 pcs System dimensions: Arms: base + 5 arms, 80 cm long Load capacity: 160 kg/upright Uprights: 4 pcs, 2500 mm high, 90 cm upright spacing Load capacity: 1000 kg/upright Total system length: 3300 mm Total system depth: 1100 mm Single-sided: 1090 EUR Double-sided: 2000 EUR

Condition: like new (used), Year of construction: 2017, Price from location dismantled, packed and loaded: Partial quantities can be purchased! We reserve the right to a minimum purchase! Manufacturer: Profielnorm B.V. Type: storage platform Year of construction: 2017 Floor area: approx. 1440 m2 Platform load: for main and side corridor 500 kg/m2 Laodpfx Afsm Dr U Sjkof for folding door 1000 kg/m2 Floor height (top edge of floor covering): 3.880 mm Bottom edge of beam: 3.530 mm Axle distance: according to drawing Platform covering: grid support Stairs: 6 pieces Folding door (automatic): 6 pieces Condition: very good Available: immediately Location: Hungary/Budapest Plan of the stage: upon request

Condition: new, Cantilever racking is ideal for storing long goods such as pipes, rods, or sheets. The uprights and profiles of our cantilever racking are made of particularly strong, hot-formed IPE profiles. The racking rows can be of any length and can be used on one or both sides. Cantilever racking is relatively easy to install and reconfigure. Without actual shelves, adjusting the height and angle of the arms is simple and quick. This flexibility in the racking allows you to store a variety of loads. If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking, as well as accessories, and would be happy to assist you with your planning. Further accessories available include: Frame, corner, and end protection, push-through protection, chipboard, grating, rear panel grating, and deep shelf supports. Shipping: Please request a quote for shipping costs, specifying your postal code and location, as well as the desired quantity of items. Lajdpedmkv Hefx Afkjf Further service offerings: Planning, racking installation/dismantling, purchase/sale Changes and errors in technical data, specifications and prices, as well as prior sale, are reserved!

Condition: used, SSTOW single-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules (IPE 300): Product code: MPP001696 Height: 750 cm Depth: 157 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 300 mm Net price: €959.00 net per 1 module/section. Product code: MPP001698 Height: 750 cm Depth: 200 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1079.00 net per module/section. Product code: MPP001697 Height: 750 cm Depth: 217 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1195.00 net per module/section. Product code: MPP001702 Height: 750 cm Depth: 157 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1,909.00 net per module/section. Product code: MPP001704 Height: 750 cm Depth: 200 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €2,129.00 net for 2 modules/sections. Product code: MPP001703 Height: 750 cm Depth: 217 cm Spacing: 100 cm Lsdpfx Aox Igwrjfksaf Number of levels: 0 + 5 Load capacity per arm: 1,500 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €2,429.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: used, STOW double-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules: Product code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 270 mm Net price: €1069.00 net per 1 module/section. Product code: MPP001694 Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1239.00 net per module/section. Product code: MPP001695 Height: 750 cm Lajdpfx Asx Ig Hmjfkjf Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 330 mm Net price: €1569.00 net per module/section. Product code: MPP001699 Height: 750 cm Depth: 267 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 270 mm Net price: €2,079.00 net for 2 modules/sections. Product code: MPP001700 Height: 750 cm Depth: 270 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile cross-section height: IPE 300 mm Net price: €2,479.00 net for 2 modules/sections. Product code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €3139.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: new, Year of construction: 2019, Storage tanks, e.g. for bitumen for asphalt mixing plant(s), etc. (vertical design) 7 x 70 m³ 1 x 68 m³ with agitator New, unused, from project cancellation, thermal oil heated and electric heating possible, complete, immediately available, for sale (individually or as a complete package). Laedpfxsw Nwtle Afkof

Condition: good (used), Bracket, holder, support block, support for conveyor belt, belt conveyor, transport belt, belt conveyor, roller conveyor -Support stand: height-adjustable, swiveling -Height: up to approx. 620 mm -Width: 540 mm -Dimensions: see photos -Number: 2x holders available Price: per piece -Overall dimensions: 665/150/H617 mm Laedpfxjh Eciyo Afkef -Weight: 13.4 kg/pc.

Condition: good (used), Bracket, holder, support block, retaining support for conveyor belt, belt conveyor, transport belt, belt conveyor, roller conveyor Lsdpfxoh Ecirj Afkjaf -Support stand: height-adjustable, swiveling -Height: up to approx. 650 mm -Width: 550 mm -Dimensions: see photos -Number: 12x holders available Price: per piece -Overall dimensions: 665/150/H650 mm -Weight: 15.3 kg/pc.

Condition: used, functionality: fully functional, mileage: 30,103 km, power: 346 kW (470.43 HP), first registration: 08/2022, fuel type: diesel, empty load weight: 21,535 kg, maximum load weight: 4,465 kg, overall weight: 26,000 kg, tire size: 385/65 R 22,5 u. 315/80 R 22,5, axle configuration: 6x6, wheelbase: 4,500 mm, next inspection (TÜV): 02/2026, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, navigation system, onboard computer, parking heater, soot filter, traction control, trailer coupling, Vehicle number # 30103 Euro 6 D TN cab with 1 bed 6 x 6 all-wheel drive Wheelbase 4,500 mm Leaf spring suspension Tires 386/65 R 22.5 and 315/80 R 22.5 Body dimensions (inside): 3,800 x 2,480 x 600 mm (bulkhead 1,300 mm) 390 liter tank Differential lock Mechanical 8-speed split transmission Air conditioning Auxiliary heating PTO Cruise control Traction control FASSI F 455 RA 2.26 loading crane JIB preparation V20 cable winch Hydraulic 4-point outriggers Front outriggers Heated driver's seat MAN Multimedia System Advanced Navigation system 2-point electric rear view mirror Heated exterior mirror Rearview camera MAN BrakeMatic 3-stage engine brake Fifth wheel coupling Rockinger trailer coupling Duomatic/Standard Diesel particulate filter Sun visor Rotating beacons Roof hatch LED daytime running lights Work lights 5 pairs of lashing eyes 4 large tool boxes 2 small tool boxes Headlight range adjustment Multifunction steering wheel On-board computer Lodewmdg Uepfx Afksaf RIO box Off-road gear reduction ABS Offroad Climbing brake Left roller blind Drum brake Leasing or financing available upon request!

Year of construction: 2003, condition: good (used), Type: TLI 4500/2044 Lodpjhyhlkofx Afksaf Device No.: 03502 Year of Manufacture: 2003 Device Height: approx. 4500 mm Device Width: approx. 2000 mm Device Depth: approx. 7010 mm Number of Rollers: 44 Roller Width: approx. 1680 mm Shelf Load: 150 kg Total Load: 7000 kg Superstructure: see photo, 3000 mm Color: beige

Condition: used, mileage: 394,650 km, power: 278 kW (377.97 HP), first registration: 08/2011, fuel type: diesel, empty load weight: 10,950 kg, overall weight: 18,000 kg, tire size: 315/80 R22,5, axle configuration: 4x2, wheelbase: 4,900 mm, fuel: diesel, color: orange, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 6,200 mm, loading space height: 2,580 mm, Equipment: ABS, additional headlights, cruise control, differential lock, low noise, parking heater, spoiler, tail-lift, traction control, trailer coupling, Urea tank (AdBlue) Engine capacity 10,837 cc EBS Light alloy rims Euro EEV 1 Lodpfxju Hgzge Afksaf Payload 7,050 kg Automatic air conditioning Dinkel swivel wall box body type ADKLLW Bear type BC 2000 S4 Alcoa aluminum rims Sun visor 1 couch Air + electricity for trailer operation Errors excepted

Condition: like new (used), functionality: fully functional, mileage: 50 km, first registration: 01/2025, empty load weight: 10,500 kg, overall weight: 14,100 kg, wheelbase: 3,850 mm, Year of construction: 2026, operating hours: 1 h, load capacity: 3,350 kg, pivoting range: 400 °, Equipment: ABS, all wheel drive, cable winch, crane, cruise control, differential lock, onboard computer, seat heater, trailer coupling, Kranimog special model KARL - special model! Unimog U5023 with HMF crane with 5 extensions and CABLE WINCH! - also available with work basket! The Unimog only has a total height of ~ 3.68 m with the large Michelin! the important equipment - more details available on request - of the Unimog Tire pressure control system Off-road rear group Automatic Shift EAS Gearbox auxiliary drive End cross member for increased trailer load Trailer coupling Air conditioning Driver's air seat, suspension seat Front camera and rear view camera, monitor Lodpfx Afevluvrjkeaf Tachograph digital generation 2 Exhaust system tailpipe upwards High performance engine brake HMF crane 1620 with 5 extensions and cable winch - WORK BASKET available as an option! ==> Scharmüller trailer sled with truck coupling and/or car coupling - with truck approval (a specialty and exclusive to us) In conjunction with the Scharmüller cross member and Scharmüller trailer sled, the following trailer values are possible: Trailer with continuous braking system: 21,000 kg Trailer with overrun brake: 3,500 kg Trailer without brakes: 750 kg Central axle trailer: 13,000 kg and support load: 1,000 kg  this makes the U5023 a multifunctional towing vehicle from car trailers, to ZAA trailers, to classic turntable trailers, at every possible height, the right coupling!  Ideal for you to drive your crane, because the Unimog itself is short and can therefore attach very long trailers.  Our special model also has a working gear: perfect for maneuvering, because it is very easy on the clutch and the speed can always be selected appropriately when necessary. Offer subject to change, only while stocks last - subject to prior sale. Unimog is still in use in some cases, mileage may vary!

Condition: new, functionality: fully functional, overall weight: 26,000 kg, Year of construction: 2026, warranty duration: 36 months, Equipment: crane, cruise control, parking heater, seat heater, trailer coupling, DAF XF 530 FAT with front crane Fassi F255 A, leading axle, valid until 2026! Laedpox Ekddjfx Afkef

Condition: ready for operation (used), Year of construction: 2018, total height: 2,414 mm, total width: 1,110 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 500 mm, overall weight: 800 kg, product length (max.): 1,266 mm, number of axes: 3, This 3-axis Hexagon Tigo SF 05.06.05 was manufactured in 2018. It features a measuring volume of 500 x 580 x 500 mm and a granite measuring plate with high-precision linear ball bearing guideways. The machine supports a maximum workpiece weight of 150 kg and operates without the need for compressed air. If you are looking to get high-quality measurement capabilities, consider the Hexagon Tigo SF 05.06.05 CMM machine we have for sale. Contact us for further details. - Machine Structure: Cantilever design with steel frame construction- Overall Dimensions (X x Y x Z): 1110 x 1266 x 2414 mm- Table Specifications: Granite measuring plate (fixed desk) with M8 x 1.25 threaded inserts, flatness according to DIN 876/II- Guideways: High-precision linear ball bearing guideways- Measuring System: METALLUR scale, resolution 0.039 µm- Pinion/Ram Counterbalance: Steel spring- Max. Workpiece Weight: 150 kg- Compressed Air Requirements: No compressed air required (does not require compressed air, meaning no air compressor is needed!)- Dynamics (3D Speed): Max. 520 mm/s- Dynamics (3D Acceleration): Max. 1750 mm/s²- Scanning Speed: Max. 300 mm/s- Temperature Range for Guaranteed Uncertainty: 15 to 30 °C- Operating Temperature Range: 10 to 45 °C- Relative Humidity: 40% - 70% non-condensing- Temperature Compensation: Multi-sensor temperature compensation technology- Probe / Sensor Systems Compatibility: Equipped with LSP-X1c touch probe system (Max. probe weight: 33g; Max. probe length: Axial 125 mm, Lateral 60 mm); also compatible with TESASTAR-m M8 / TESASTAR-mp- Controller & Operating System: All-in-one system with integrated PC and controller in the base, adjustable arm mount for screen, keyboard, and lightweight jogbox- Advanced Software Modes: Fly2 Mode (trajectory optimization), Eco Mode (automatic shutdown) Lasdpfx Afozufkbjkjf

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Lsdpfx Afezvhkysksaf

Condition: new, Two options: 760mm depth and 1400mm depth. Contact us! The mobile cantilever rack from Holzprofi Maker ensures order and flexible storage in the workshop. Panels, slats, or processed components can be safely transported, stored, or dried cleanly after painting. The width of the rack is adjustable from 300 to 1250 mm, adapting to different workpiece sizes. Lasdpfx Afjzqrynekof Ten compartments with a 760 mm depth offer sufficient space for larger components. The 120 mm distance between the levels allows for good air circulation, which is particularly helpful when drying painted workpieces. PVC support surfaces on the cantilever profiles protect sensitive surfaces from scratches. Four stable PA wheels with PU covering ensure smooth running, two of which have brakes for secure stability. With a total load capacity of up to 500 kg, the cantilever rack remains stable and mobile even under high loads. Advantages & Features: - Variable width: Adjustable range from 300 to 1250 mm for different workpiece sizes. - 10 storage compartments: Structured storage with quick access to components. - Large compartment depth: 760 mm depth for panels, slats, and larger workpieces. - Surface protection: PVC supports protect sensitive components from damage. - Stable wheels: PA wheels with PU covering for smooth running in the workshop. Technical data: Variable width: 300 - 1250 mm Compartment depth: 760 mm Compartment spacing: 120 mm Number of compartments: 10 Max. total load: 500 kg Max. load per compartment: 50 kg Wheels: PA with PU covering Wheel dimensions: Ø125 x 40 mm Wheels with brake: 2 pieces Net weight: 72 kg Gross weight: 76 kg Packaging dimensions: 1815 x 340 x 160 mm

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Number of grooving units: 1 Position of grooving unit: top Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Total connected load: 17.1 kW EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Laedpfxozmtlks Afkjf External reference: 8359

Condition: used, overall weight: 125 kg, Pei Point Spot Welder BSP 226 RF PX1700ECO Welding Machine - Spot Welder, used 🧰 Product Features • Model: P.e.i Point • Condition: good condition, used • Color: blue, gray • Year of Manufacture: 2021 • Dimensions: 110 x 44 x 132 cm • Weight: approx. 125 kg • Rated Power: 25 kVA • Voltage: 400 V • Rated Current: 44 A • Special Feature: includes water cooling unit and arms 💰 Price € 3790,- net, excluding VAT • Quantity discount: on request • Shipping costs: available throughout Europe on request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment Lodpfx Aozru Ahjfkeaf • Product number: P10451 Constantly over 5000 linear meters of pallet racking systems from numerous manufacturers in stock (Changes and errors in technical data, information and prices as well as prior sale reserved! See our General Terms and Conditions, all prices excluding VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers in new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel structure platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Ledpovmwxxofx Afkjaf Main Features： Simple and Stylish Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Quality Assurance Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Smart Management Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Laodpozr N H Usfx Afkjf Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.