Used Burgess Laminator for sale (852)

Condition: ready for operation (used), Year of construction: 2024, feed rate X-axis: 5 m/min, The machine has already been dismantled and stored. TECHNICAL DETAILS Adjustable speed: up to 5 m/min Roller pressure: pneumatic Iodpfx Aljzb Ip Ijtotk Adjustable temperature EQUIPMENT Manual system Swiveling, patented control panel Monochrome display Automatic sheet separation Anti-curl technology Compact design Faster Foiling KIT Ultra-quiet compressor Console on wheels IVIVID Matrix Omni-Flow Feeder 380 High-stack feeder LC display Adjustable front air flow Central suction belt Note: Accessories are without guarantee. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: good (used), Build in 2006 Komfi Aspira Laminating machine Max laminating speed 15 m/min Itodpfxjgyzzue Altek Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Paper weight . 115-350g/sqm.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Itjdpjylpvdsfx Altjk Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg !! Available for immediate sale !!

Condition: ready for operation (used), functionality: fully functional, We offer this ready-to-use IML Machinery DA-900 IML DA 900 box laminating machine. Manufacturer: IML Machinery Model: DA-900 Condition: ready for use Category ID: 174 Type ID: 82 Machine type: IML DA 900, box laminating machine DESCRIPTION Thanks to its ease of operation and quick changeover capability, this electro-pneumatic machine is suitable for small and medium production volumes of high-quality boxes. The operator places the box onto the pre-glued facing paper and then manually feeds it into the machine. Once the box is positioned, the processing sequence is started via the machine's foot pedal. The machine then operates independently, lining the box, including the inner flap. At the end of the cycle, the box is automatically ejected. TECHNICAL DATA Itodpfx Alszfv Tzotsk Production: approx. 7 pieces/minute Voltage: 220 volts, single-phase Total power: 2.5 kW Compressed air connection: Rilsan hose Ø 12 mm Air consumption: 20 NL/minute at 6 bar DA 900 Box dimensions (L × W × H): min. 60 × 60 × 10 mm; max. 430 × 350 × 120 mm Machine dimensions (W × D × H): 1200 × 1400 × 2300 mm Weight: 1000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), 5 pieces, A-rack, support per side: 390 mm External dimensions: Width: 2420 mm Depth: 1360 mm Itedpfx Alsxat Ulotsk Height: 2530 mm

Condition: used, Year of construction: 2010, Year: 2010 Condition: very good- after overhaul Foliant Gulliver C 520 A - automatic loading and separation - maximum format: 520 mm (width) x 720 mm (length) - speed regulation 0 – 15 m / min - temperature regulation 80 – 140°C - cars vacuum belt loader Isdpfxey Exb Do Altstk - automatic separator - pneumatic pressure

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, Panel Laminating Line for AKRYL, PET, PVC, HPL, CPL MASTER PUR-1400 Professional line for single-sided laminating of panels using PUR hot melt adhesive. Application: The machine is designed for laminating: MDF particleboard plywood PVC boards gypsum boards other wood-based materials Supported finishing materials: AKRYL PVC HPL PET CPL Isdpfx Alszkmqbetjtk decorative paper Technical specifications: Working width: 1400 mm Maximum panel size: 2800 × 1300 mm Panel thickness: 2–40 mm Operating speed: 5–17 m/min Output: 3–5 pieces/min Maximum output: approx. 1200 pieces/8 h Drive power: 21.49 Kw Heating power: 51.7 Kw Line dimensions: approx. 16 × 2.5 × 2 m Required floor space: min. 6 × 22 m Line equipment: feeder with roller conveyor brushing machine for cleaning panels IR oven for preheating the material 3-roller PUR adhesive applicator foil feeding station roller nip press receiving conveyor 208-liter PUR adhesive melting tank Advantages: high surface quality even adhesive application possibility of laminating high-gloss films low adhesive consumption stable operation in serial production

Year of construction: 2022, operating hours: 50 h, condition: excellent (used), functionality: fully functional, Assonic Ultrasonic Compact Sieving Machine CSM-500 SPC – Inertizable - Ultrasonic sieving combined with low-frequency excitation - Control panel for manual operation or integration into process workflows - Inlets and outlets: ISO-KF40 - Prepared for inertization (sieving with < 2% residual oxygen possible) - Incl. dosing unit and bottle holder - Gas connection with quick connector Specifications (excerpt from Assonic website) - Approx. 400 kg/h 316L at 63 μm - Approx. 100 kg/h AlSi10Mg at 63 μm - ATEX certification possible - Small footprint - Standalone machine - Low CO² footprint Accessories: - Laminate sieve 43 µm (new) - Laminate sieve 20 µm (new) - Laminate sieve 63 µm (used, for aluminum materials) Condition: - Very good condition, normal signs of use - Ready for operation - Scope of delivery: as described - Price: plus shipping costs - Sale exclusively to businesses Itedpfxjywhvnj Altek - Sale without any warranty - No guarantee, no returns - Sold as inspected or as described - Liability for consequential damages excluded - Errors and prior sale reserved - All information subject to change

Condition: used, machine/vehicle number: Mod 802 EI 48, Transformer lamination stacking machine EI 48 Iodoyl Ad Uspfx Altstk

Condition: good (used), functionality: fully functional, mileage: 13,187 km, power: 140 kW (190.35 HP), gearing type: automatic, fuel type: diesel, Year of construction: 2007, operating hours: 13,187 h, Wheel loader Liebherr L556-454, 2plus2 configuration, year of manufacture 2007. Equipped with Liebherr engine D934L A6 delivering 140 kW, automatic transmission, and self-locking differentials on both axles. The stepless 2plus2 drive system and wet multi-disc brakes on both axles ensure high traction and operational safety. The machine features single-lever control, air conditioning, adjustable steering column, and a driver's suspension seat with LFD damping system for enhanced operator comfort. The cab is fitted with a laminated safety glass windscreen, green/tinted version. Additionally, there are 4 working lights at the front and 2 reversing lights. Attachments and special equipment: - 2600 mm lift mast - Piston rod protection for 2600 mm lift mast - 4 Michelin tyres 23.5 R25 XHA*L3 - Quick coupler - Single rail guide for Z-kinematics / 2600 mm lift mast - Single front hydraulic auxiliary circuit and additional hydraulic swing function - Automatic central lubrication system with electric pump and electronic control - Reversible fan drive - Electronic auxiliary module with keypad - Top-Air pre-cleaner - Control lever lift lock for add-on lever set - Operator seat with pneumatic suspension Grammer 24V - Radio installation kit 24V - Rear view monitoring with camera and monitor Itedpfx Asy Dt A Tsltjk - German/Luxembourg version - Operating manual GT list A powerful and comprehensively equipped wheel loader, suitable for demanding tasks in construction, recycling, industrial applications, and material handling. Sale is made without warranty and liability.

Condition: as good as new (ex-display), Year of construction: 2025, CMS Agil Lam Ijdjwd If Nepfx Altotk Cutting table for Laminated Glas Glas Max. workable Size: 3.810 x 3.300 mm Thickness: 8+8 mm Min. Glas Thickness: 2+2 mm

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine Type Vorwärts 1100 Fully automatic, both carrier sheet and cover sheet are processed automatically. Suitable for a wide range of applications: corrugated board, cardboard, semi-board, fabrics, films Max. format 1000x1400 mm Itsdpfx Asy D D A Dsltek Min. format 200x280 mm Carrier material weight approx. 250 g/m² – approx. 5 mm Cover material weight approx. 80 g/m² – approx. 800 g/m² Up to 2,000 laminating cycles per hour Documentation & circuit diagrams available. Incoterm FCA Oberhasli, Incoterms® 2020 – loaded on truck The machine is in operation and can be inspected.

Condition: used, Second-hand machine In all operating modes, the materials are fed from the front through the roller gap and joined together by pressure Standard number of axes: Material unwinding 2 Silicone paper unwinding 1 Roller gap adjustment 0–52 mm Pressure 0.3–0.8 N/mm Processing speed maximum 5 m/min Slow operation 0.6 m/min Reverse operation 0.6 m/min Noise level > 70 dB(A) Material data: Max. width 1400 mm Max. material diameter: Iodpoznk A Nefx Altstk Unwinding diameter 200 mm Silicone paper take-up diameter 150 mm Max. panel thickness 50 mm Inner diameter of roll core: 76.2 mm Power supply 230 V Availability: short notice Storage location: Röllbach

Condition: excellent (used), Year of construction: 2014, Ref:11125 . Fotoba XLD 170 + Fotoba REW 104 Slitter Rewinder. 2013 Fotoba XLD 170 High speed cutter. Primarily used for digitally printed wallpaper up to a maximum thickness of 0.8 mm. Including polycarbonate, photo paper, vinyl, self adhesive vinyl, PVC, film, Duratrans, TDF, canvas, laminated or encapsulated prints, etc. Using cut marks generated by the RIP and with 'True Image Edge Tracking', the cutting is executed with precise accuracy. The sensor automatically follows the prints. Isdpfxjzmx Nus Altjtk Extremely easy roll loading. 'Digitrim' function enhances the versatility of the XLD 170. Features & specification: Self squaring to the edge of the image 'X' Automatic tracking of the image edge 'Y' Memory channels to store different cut marks. All mechanisms controlled by stepper motors. Self sharpening knife system. Vertical slicers; single 8 mm double or adjustable double. Adjustable cutting lengths & quantities - accuracy +/- 1 mm (0.039") Max. linear speed: 18m / 50ft. Cutting width, Max: 170 cm (67") Min: 28 cm (11") Max. load 200kg (440 lbs), max. diameter 60 cm. 2014 Fotoba REW 104 Automatic in-line coreless rewinder. Made for non-stop industrial production. Can rewind two rolls simultaneously up to 20m long. Can wind up tiles of the same job for better logistic. Maximum roll diameter: 90 mm Maximum rolled weight: 8 kg

Condition: used, Year of construction: 2000, functionality: fully functional, working width: 1,400 mm, Manual Sheet Laminating Machine, Gluing Machine Tünkers Forward 1450S Iodpfx Aey Svqpeltstk This is a hand-operated machine where carrier and pressure sheets are processed manually. This well-maintained unit is suitable for a wide range of applications. For example, it can be used for laminating corrugated cardboard, corrugated board, cardboard, semi-cardboard, as well as films and fabrics. The maximum sheet size is 1400 x 1400 mm, the minimum sheet size is 200 x 280 mm. Carrier material weight approx. 250 g/m² up to approx. 8 mm thickness possible. The weight of the top material can range from approx. 80 g/m² to 800 g/m². Depending on material and size, up to 600 laminations per hour are achievable. Training and instruction on the machine and its operation can be provided if needed; we are happy to assist! Currently, the machine is located in Viersen-Dülken. If you have any questions, please feel free to contact us.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 3,220 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,860 mm, load center: 800 mm, fuel type: electric, mast type: duplex, battery capacity: 930 Ah, battery voltage: 48 V, fork carriage width: 2,840 mm, fork length: 1,600 mm, ground clearance: 130 mm, turning radius (outer): 1,950 mm, total height: 2,710 mm, total length: 2,840 mm, total width: 2,670 mm, color: white, Equipment: cabin, Electric four-way reach truck HUBTEX MQ 30, first owner, in very well-maintained condition: – Model MQ 30 AC / Series 2125-EL (larger model series) – Designed for the transport and stacking of wood-based panels – Load capacity 3000 kg at LSP 800 mm to H3 5000 mm – Load capacity 2670 kg at LSP 1050 mm to H3 5000 mm – NB = 1600 mm useful width – MV = 1700 mm mast extension – RB = 2670 mm frame width – b1 = 1040 + 30 mm front dimension – b2 = 1070 mm front dimension with reinforced fork carrier – RL = 2440 mm frame length – KÜ = 180 mm cab overhang – GL = 2840 mm overall length over fork carrier – Ra = 1340 mm wheel arm clearance – SH = 2500 mm height above driver protection roof (+300 mm) – Rh = 500 mm height wheel arms – BF = 130 mm ground clearance lower mast – Wa = 1950 mm turning radius – 3-stage lift mast H 60 TIL (very stable) – H1 = 2707 mm height of lift mast retracted – H2 = 1867 mm free lift – H3 = 5000 mm lift height (top of fork tines) – H4 = 5840 mm height of lift mast extended Itsdpfxjzugt Re Altjk – VH = 840 mm height fork carrier – Intermediate lift limitation at H3 = 3900 mm – Long load fork carrier Type II, GTL = 2840 mm – Fork carrier in low and reinforced design – Fork adjustment hydraulically from 560 to 2840 mm (adjustable forks) – Fork tilt hydraulically +5 / –3 degrees – Fork tines (pair) length 1600 mm – Fork cross-section 50 x 150 mm – Multi-directional steering system H4 electronically controlled – 4 steering programs with longitudinal/lateral travel and circular/diagonal travel – Service brake as an automatic regenerative brake – Parking brake as an electro-magnetic parking brake – 4-wheel chassis with two vertical motors and heavy-duty load wheels – 2-piece swing axle with mechanical level compensation – Tires, drive side 2 x 457 x 200 mm Super-Elastic – Tires, load side 4 x 381 x 127 mm solid rubber – Motor control with three-phase motor and inverter – Drive power 2 x 4.0 kW – Working hydraulics with proportional valve technology, continuously adjustable – Lift power 14.0 kW – Steering power 4.0 kW – Operation via multi-function joystick – Driver's cabin as a lateral seat cabin Q850 with 830 x 850 mm – Entry and exit on the racking aisle side – Driver protection roof with laminated safety glass – Safety glass on the load side, front, and battery side – 2 work spotlights on the cabin roof – Comfort seat, vibration-damped, adjustable in multiple ways – On-board computer Hubtex HIT 2 – Paint finish RAL 9002 grey-white and RAL 7021 black-grey – Battery 48V 6EPzS 930 Ah – Battery charger D400G48/125 for 12-14 hours charging time – Aquamatic and filling station – Battery 48V 6PzS 930 Ah with tray renewed in 03/2021 – Year of manufacture 2006, operating hours original 3220 h – First owner, very well-maintained condition – Truck always stored in a heated hall – Regular maintenance by Hubtex – Last maintenance in 08/2025 at 3100 h – New maintenance possible upon agreement – Application was for feeding a wood-based panel saw – Sale due to automation of the panel saw – Inspection and test run possible upon agreement – Sale from location Karlsruhe / Southern Germany

Condition: good (used), Year of construction: 2002, Rondo Laminating and Shaping Line for Yeast Pastries - Smartline and Compactline model - used - year of manufacture: 2002 - length: 15 meters - without tools Itjdpfew Nx S Nox Altjk - components: satellite calibrator, dough rolling cylinder, standard calibrator, work table, cutting station, guillotine, discharge table - machine in production - collection from warehouse / shipping option - price on request

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar. Iodezmx Scjpfx Altotk

Condition: used, Year of construction: 2013, Year: 2013 Condition: very good Counter status: about 5.6 million Technical specification: - Laminating speed: 25 m/min - Minimum sheet size: 200 × 200 mm - Maximum sheet size: 560 × 800 mm - Paper weight range: 115–600 g/m² - Max. feeder pile height: 520 mm - Film thickness: 24–50 μm - Film types: OPP, PET, Nylon - Heating time (laminating roller): approx. 4 min - Sheet overlap accuracy: ±1 mm - Machine dimensions (incl. table): 263 × 100 × 147 cm - Air supply: min. 6 bar - Max. air consumption: 95 l/min - Max. pressing force: 15 kN - Power consumption: 7 kW - Machine weight: 650 k Configuration: - Suction feeder head - Vacuum pump - Automatic sheet overlap control - Double sheet / misfeed detection - Automatic sheet separation via built-in perforator - Anti-curl device (roller + bar) - Sheet separation detector Isdpfx Asy Iwirsltotk - Separation roller with adjustable speed - Electronically controlled tearing section - Fixed delivery table

Year of construction: 2016, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: Itedpfxeyw Tmlo Altjk - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Bobp Ergeyw Tmlocyodf 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Norden 700 Plastic Tube Filler Provides outputs of up to 70 tubes per minute and is designed and manufactured to produce the highest possible packaging quality standards at maximum operational efficiencies. Plastic and laminate tubes may be sealed using the Norden´s patented Hot-Air Sealing system. Itsdpfsv Hxu Usx Altok Year: 2006 Model:700 Key information: – Production capacity: 70 tpm – Filling volume: 1-300 ml – Tube length: 50-250 mm – Tube diameter: 10-60 mm – Infeed system: cassette – Blow off filling nozzle - Fully working condition

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Itedpfx Aspaiaioltsk Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Condition: excellent (used), Year of construction: 2017, The FOLIANT Pollux 760 SF High-Speed Compact Industrial Laminating Machine Year: 2017 Itodpfx Alezdyqzotok Maximum sheet size: 760 x 1100 mm Minimum sheet size: 320 x 250 mm Maximum speed: 50 m/min Paper weight: 115 - 600 gsm Temperature control: 80 - 140 °C PALLET STACKER FILM LOADER Touch screen controls

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input current: 125 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Bystronic / Hegla laminated glass (VSG) cutting system Speedcut and ProLam 3700, comprising of following components: - Speedcut float glass cutting table with tool changer and second cutting oil circuit, flat belt conveyor and air cushion, with 2 special cutting heads for laminated glass cutting (lower cutting head can be deactivated for float glass cutting) - Hegla conveyor belt TW 7833 RW - Hegla cross-cutting station STB I 33 - Hegla laminated glass cutting bridge ProLam 37 , including a traverne rotation device, remote maintenance via the internet using VPN, including software - Hegla air cushion table LTR 3034, with 4 support arms Isdozu Ayyepfx Altjtk The entire plant is in excellent condition and will be available EXW from its current location from the end of December 2026.

Condition: used, The Matrix 530 Laminator is a versatile and efficient machine designed for high-quality lamination tasks. This machine is currently in stock and located in Germany. It can handle a maximum sheet width of 550 mm and operates at a maximum speed of 10 meters per minute, ensuring quick and efficient lamination processes. The 530 Laminator supports a maximum film width of 500 mm and is capable of one-sided lamination. It features mechanical, adjustable pressure settings to accommodate various material thicknesses, starting from 135 g/qm2. The machine is compatible with foils that have a core diameter of 76 mm, making it a reliable choice for a wide range of lamination applications. Format: 550 mm Equipment: Ijdpfx Aowc Alnjltotk Max. sheet width: 550 mm Max. speed: 10 m/min Max. film width: 500 mm Lamination: one-sided Pressure: mechanical, adjustable Material: from 135 g/qm2 Core diameter of foils: 76 mm: