Foliant Guliver C 520A

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Nsdoz I Tt Iepfx Abyjlh Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. Nledpfxjyxp Nxj Abyjh The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Njdpfx Ajz I S Uwjbyjlh Fume extraction Safety light curtain

Condition: used, machine/vehicle number: CT1133L70678, Year of construction: 2021, operating hours: 6,200 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm Nljdpfx Abo Ad Rdijyeh MACHINE DETAILS Battery year of manufacture: 08/2021 Battery voltage: 24 V Battery capacity: 375 Ah Battery voltage at rest: 25.3 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 800 x 2,200 mm Weight: 1,500 kg Service valid until: 03/2027 UVV (occupational safety) valid until: 03/2027 Operating hours: 6,200 h EQUIPMENT Initial lift Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 337

Condition: used, Year of construction: 2000, The Mueller Martini Bravo saddle stitcher, manufactured in 2000 with the serial number MMZO 279 108, is a robust and versatile machine designed for efficient booklet production. With a mechanical speed of 11,000 cycles per hour and a runtime of 29,250 hours, it ensures high productivity and reliability. This machine has been dismantled and is located in Germany. Equipped with 7 vertical feeders (370 mm) and 1 cover feeder (1529 mm), it allows for flexible and efficient paper handling. The stitching unit features 2 stitching heads, ensuring secure and precise binding of booklets. The integrated 360-type three knife trimmer provides clean and accurate cutting of the finished product. The delivery system includes a Stacker OMG Cucciolo, manufactured in 2005, for organized and efficient stacking of the completed booklets. Optional equipment available on request includes a center-cut device, trio-cut device, punching device, additional stitching heads, and compressors. This machine is well-suited for businesses looking to enhance their booklet production capabilities with a reliable and proven saddle stitcher. Format: 480 x 320 mm Equipment: Feeder Number of vertical feeder: 7 x 370 Cover feeder: 1x 1529 Stitching unit Type: Bravo 2x stitching heads Three knife trimmer Type: 360 Delivery Type: Stacker OMG Cucciolo Year: 2005 Optional (available on request) Center-cut device Nledowcqx Njpfx Abyjh Trio-cut device Punching device Additional stitching heads Compressors Technical Details Mechanical Speed: 11,000 cycles/h Runtime 29.250 h

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL DATA Manufacturer: Linde Year of manufacture: 2022 Type: 48 V / 20 Ah ELECTRICAL DATA Battery voltage: 48 V Battery capacity: 20 Ah MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 600 mm Width: 600 mm Height: 800 mm Weight: 50 kg EQUIPMENT 2 lithium-ion batteries Charger Battery connector Wall plug Lot number 3632 Collection conditions: Nodpfxe Ad N S Ee Abyjlh Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 1,952 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL DATA Manufacturer: Linde Type: P50 Year of manufacture: 2019 Drive: Electric Operating hours: 1,952 h Nsdpfxo Ad N Slj Abyslh PERFORMANCE Towing capacity: up to 5,000 kg BATTERY Battery date: 06/03/2019 (?) Battery voltage: 24 V Battery capacity: 500 Ah Rest voltage: 24.7 V INSPECTIONS AND SERVICE Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,700 mm Width: 800 mm Height: 1,400 mm Own weight: 1,000 kg Lot number: 453 Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: used, Year of construction: 2016, Year: 2016 Condition: very good Configuration: - Automatic loading - Automatic separátor - Jogger - Foiler unit - Winding device that allows use of metalized film (gold, silver, red, etc.) and spot varnish film allpied over print from digital printing machine. Technical specification: - Maximal speed- single side 18 m/min. Njdpfx Abjy Exd Ejyelh - Feeding System - automatic, vacuum belt, Feeder's Capacity 28 cm - Overlaps - In-Run Screw control, Overlaps Accuracy ± 2 mm - Separation - Automatic - Paper Weight - 115–500 g/m² - Main Roller Pressure System - Pneumatic - Compressor - Included - Minimal Sheets Size (w×l) - 20×30 cm - Maximal Sheets Size (w×l) - 53×75 cm - Maximal Performance - 1500 B2 / hod. - Temperature Control - 80–140 °C, Warming Up Time 8 min - Power Supply - 230 V AC, 50-60 Hz - Power - 3850 W - Mechanical Parameters - Floorspace (w×l) 100×260 cm, Weight: 390 kg - Modular Stand - Pallet Stacker - Non-sticky pressure roller - Air Shaft

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS COMPATIBILITY FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Suitable for: Linde H50D FEATURES Design: 360° rotating device with rotating clamp Internal opening: approx. 400–1,800 mm Nlodpo Ad N Igsfx Abysh Fork positioner: present (?) MACHINE DETAILS MANUFACTURER AND MODEL Manufacturer: Linde Type: Rotating clamp Year of manufacture: 2020 Previous use: Linde H50D with 5,000 kg load capacity DIMENSIONS Width: approx. 1,700 mm Height: approx. 1,000 mm Length: approx. 1,250 mm EQUIPMENT 360° rotating device Rotating clamp Fork positioner Lot number: 1139 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 7,794 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Njdpfx Abe Ad N H Aeyolh General Manufacturer: Still Type: EXU-SF20 Year of manufacture: 2019 Operating hours: 7,794 h Lifting Capacity and Lift Lifting capacity: 2,000 kg Lift height: 150 mm Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 250 Ah Battery year of manufacture: Measured idle voltage: 25.4 V MACHINE DETAILS Dimensions and Weight Length: 2,000 mm Width: 800 mm Height: 1,400 mm Own weight: 800 kg EQUIPMENT Battery charger Functional and condition video available Lot number: 340 Collection Conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck bed height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: used, Year of construction: 2000, Gathering machine / booklet making Theisen & Bonitz TB Sprint 314 flex HP with QSM 303 14 stations, manual feeder TB Sprint flex 314 HP Nlsdpfx Aozictpobyjh Format (max.): 350 × 500 mm Stack height: up to 650 mm Performance: - Up to 3,300 cycles/hour in 1:1 operation - Up to 4,200 cycles/hour in 1:2 operation TB B303 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: ready for operation (used), functionality: fully functional, operating hours: 5,515 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,200 kg Lifting Lifting height: 1,924 mm Fork length: 1,150 mm Initial lift: Simultaneous lifting of 2 pallets Ground clearance: Increased by initial lift, suitable for uneven surfaces Battery Battery voltage: 24 V Battery capacity: 375 Ah Measured battery voltage: 24.6 V Battery year of manufacture: 2023 MACHINE DETAILS Machine data Manufacturer: Linde Type: D12HPSP Year of manufacture: 2021 Operating hours: 5,515 h Own weight: 1,500 kg Nlsdpfx Abj Ad N E Ejyjh Dimensions Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm EQUIPMENT Initial lift Battery year of manufacture 2023 Formerly a Linde full-service unit Lot number: 370 Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nsdpfx Abe Ad N Elsyjlh General Manufacturer: Linde Type: D12HPSP Year of manufacture: 2021 Operating hours: 6,655 h Lifting Capacity and Lift Lifting capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm Initial lift: available Pallet capacity: 2 pallets simultaneously Battery Battery year of manufacture: Week 44/2023 Battery voltage: 24 V Battery capacity: 375 Ah Measured battery voltage: 25.5 V MACHINE DETAILS Dimensions and Weight Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm Own weight: 1,500 kg EQUIPMENT Initial lift for increased ground clearance on uneven surfaces Previously a Linde full-service machine Lot number: 390 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: used, RICOH PRO C9200 (115 PPM) SR5050 Finisher Plokmatic Booklet Maker Module BM350 35 sheets + guide Njdpfxjz R At Rj Abyjlh Plokmatic Top and Bottom Trimmer Plokmatic Square Spine Stitching Module Plokmatic Waste Trimmer Fiery E46 + ES3000 Controller Counter: 11,000,000 Upgradeable Available December 2026 Price and information available via WhatsApp

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,386 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 10,386 h Load capacity: 1,800 kg LIFTING EQUIPMENT Mast type: Triplex mast Lifting height: 4,500 mm Full free lift: available FORKS AND HYDRAULICS Fork length: 1,000 mm Hydraulic valves: 3rd + 4th valve Fork positioner: hydraulic Side shifter: available BATTERY Battery year of manufacture: Battery voltage: 48 V Battery capacity: 898 Ah Battery idle voltage: 54.6 V MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 3,000 mm Overall width: 1,150 mm Overall height: 2,060 mm Dead weight: 3,400 kg EQUIPMENT Battery charger Semi-cabin Lateral fall protection LED work light (rear) Orange warning light Comfort seat with lumbar support Seat heating Lot number: 229 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Nsdpfx Aj Ad N D Uobyjlh Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.