Used Bizon Bottom Flattener for sale (3,004)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, tank capacity: 31,000 l, total length: 7,820 mm, total width: 2,550 mm, total height: 2,670 mm, overall weight: 36,000 kg, wall material: stainless steel, number of chambers: 1, operating temperature: 130 °C, operating pressure: 3 bar, pressure (max.): 4 bar, overpressure (max.): 6 bar, empty load weight: 4,650 kg, pressure: 4 bar, temperature: 130 °C, Equipment: type plate available, Stainless steel V4A tank container with a 50 cm dome lid and a second dome lid, also 50 cm (or 30 cm). Bottom outlet: 3-inch BSP, equivalent to 7.5 cm. Insulated (10 cm polyurethane), cleaned, (heating possible). Location: Rotterdam. Rental possible. Photos are archive photos; originals available upon request. All information is provided without warranty; errors and prior sale excepted. Nsdpfx Aeufgkvearswk

Condition: used, continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm electrically heated ± 90 kW belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed Nedpfx Aezum R Njarjwk dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm

Condition: new, 400 L capacity all stainless steel with stirring system conical bottom with centrifugal pump power : 2 kW dimensions (l x w x h) : ± 1.200 x 700 x 1.500 mm Nedpfxezudr Re Aarowk

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Colour: Grey Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 15 Nodszvcqzjpfx Aarjwk - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 22 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, This listing is for 1 of 2 Spectramax M2 Microplate readers These units are in full working condition and is ready for immediate use Overview The SpectraMax M2 (and enhanced M2e) from Molecular Devices is a high-performance multi-mode microplate reader designed for flexible detection in life science applications. It combines absorbance, fluorescence, and optional luminescence in a compact benchtop instrument ideal for ELISA, DNA/protein quantification, enzyme kinetics, and cell-based assays. Key Features Multi-detection capability: Supports absorbance, fluorescence (top-read), and with the M2e, adds bottom-read fluorescence, luminescence, and time-resolved fluorescence (TRF). Top- and bottom-read fluorescence: Bottom-read only on the M2e for enhanced cell-based assay sensitivity. Dual-mode cuvette port: Enables standard spectrophotometry outside of microplate format. Dual monochromators: Selectable excitation and emission wavelengths (1 nm increments) without the need for filters. PathCheck® Technology: Automatically normalizes optical pathlengths for absorbance, ensuring accurate, cuvette-equivalent readings. Nedpexhfzyefx Aarswk Well volume sensor: Prevents errors from low-volume or uneven well filling. Instrument and software validation: Compatible with SoftMax® Pro software for data analysis and 21 CFR Part 11 compliance, supporting regulated lab environments. Robot compatible: Integration-ready with automation systems and plate stackers for high-throughput workflows. Typical Applications ELISA DNA/RNA/Protein quantification Enzyme kinetics Cell viability and cytotoxicity (M2e preferred) FRET and TR-FRET Luminescence assays (M2e) Low-volume or cuvette-based protocols

Condition: excellent (used), Year of construction: 2006, Ref:11128 . 2006 Longford Inserter-Folder Primarily for the production of greetings cards, but can produce other inserted products at high speed. Comprising; Upper C700 Friction pile feeder for insert, top-loading, bottom feeding. Lower C700 Friction pile feeder for main product, top-loading, bottom feeding. Feeders can be configured in either a single or batch feed mode. Njdpfxjzmydaj Aarewk Easily integrate with OEM equipment. Heavy duty scoring roller shafts. Robatech IK 40/4 glue control unit. PVA cold gluing system with single head. Longford digital control unit Automatic counter with batch marking Belt folding element Hydraulic variable speed Stream delivery conveyor Including accessories, tools and manuals. Specification: Sheet size, Max: 355 x 254 mm Folds to: 177 x 254 mm Min: 102 x 102 mm Folds to: 38 x 76 mm Stock weight : 100 – 400 gsm2 Belt speed : up to 175m/min.

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Nwsdozmx Scjpfx Aarek Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: excellent (used), Year of construction: 2021, Ref:11122 . 2021 & 2020 SIAT XL-461 Box Taping Machines. A pair of semi-automatic sealing machines with random adjustment. Meaning the machines are able to adjust themselves according to the different box dimensions. They apply automatically a 'C; strip of adhesive tape to the top & bottom of the box. Specification of each machine: Drive belt speed: 20m/min. 2 x motors kW 0.13 2 x K12R taping unit - 75 mm width Aluminium telescopic legs with millimetric guide Adjustable working height: 445 - 705 mm Locked stop emergency button Nsdpfjzmx Hyjx Aarowk On/Off magneto-thermic switch Adjustable descending height of the taping unit Top head pneumatic pressure regulators.

Condition: excellent (used), Year of construction: 2015, Ref:11123 . 2015 Loveshaw CF20-EC Carton Erector. Automatic carton erector and bottom sealer. Nwsdpfxjzmx Hae Aarek Features: Consistent seal quality Quick changeover Low tape alarm (option) Case on demand sensor Specification: Carton size range - L. 250-570 mm - W. 170-410 mm - H. 90-550 mm Magazine: Up to 100 cases Closure material: Pressure sensitive tape Speed: Up to 14 cases per minute.

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Nsdpfjzwl R Tjx Aarowk Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops Weight: about 350 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Factory new – never installed! Weinig Hydromat 4300, high speed planer and moulder Feed speed 30-300 m/min Spindle 1 (Bottom) – Radial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 2 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 3 (Right): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 4 (Left): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Nwjdpfx Aajzu Awrjrek Spindle 5 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer + profile jointer fully automatic Spindle 6 (Bottom): – Table tops with wood inserts, maximum cutting height of 65 mm with a flange of 100 mm – Rotaplan pressure plate above the bottom shaft – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic – Hydro bearing with automatic locking General: – Horizontal CNC-controlled pressure rollers – CNC-controlled positioning input – Marathon Powercoating Plus – Automatic waxilit pump – Weinig WMC with touchscreen – Kickback protection for sawing operations – Machine with spindle and feed brakes – Safety and sound insulation housing

Condition: used, Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor.  Type of Machine: Butter Packaging Machine Capacity: ± 600 Kg/h Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height Weight: 250 grams Machine Weight: 840 kg Packaging type: Aluminium and Parchment Paper Motor power: 1,5 kW Nodpfx Aaszhlmierswk

Condition: used, functionality: fully functional, mileage: 338,510 km, power: 353 kW (479.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e. MAN TipMatic Efficiency Plus driving program, without kickdown function Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Nedpszuwrqsfx Aarewk Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed. Tyres Information Front left - 12 mm Front right - 13 mm Rear left inner - 11 mm Rear left outer - 10 mm Rear right inner - 13 mm Rear right outer - 12 mm

Condition: used, functionality: fully functional, mileage: 448,861 km, power: 346 kW (470.43 HP), first registration: 09/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver's seat, air-sprung, with lumbar support and shoulder adjustment Co-driver's seat, not sprung, length and backrest adjustment Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Nwedpfxozuwq Hj Aarek Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 408,405 km, power: 346 kW (470.43 HP), first registration: 10/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e Nedezuwqyepfx Aarowk MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment Comfort co-driver’s seat, air-sprung Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Spare wheel, in accordance with configuration for front axle tyres Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 11 mm Front right - 13 mm Rear left inner - 7 mm Rear left outer - 8 mm Rear right inner - 7 mm Rear right outer - 7 mm

Condition: used, Article: Chip processing system Manufacturer: Lanner Type: Vetamat DS32 Yob: 2010, in 2025 completely refurbished Nedpfx Ajzcyfwjarswk The patented Vetamat system reliably separates metal chips from coolant. The systems achieve a throughput of up to 2,000 kg/h. The complete systems include a centrifuge, a chip conveyor with tank, a sump, and a control system. Depending on the type of material, you can choose between a parabolic centrifuge or a scraper-bottom centrifuge. Thanks to the modular system, the Vetamat system can be optionally expanded with a chip crusher, a large-part sluice, or a lifting & tipping device, as well as coolant treatment. - Very short commissioning time - Turnkey design - Minimal space requirements - Excellent accessibility - Modular system - Mounted on a WHG-compliant oil-tight sump - High operational reliability - Proven Lanner technology - Fully automatic operation with standby function - Expandable for long chips and coolant cleaning - Chip container under the centrifuge can be loaded from three sides Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Reportedly unused Sinclair Stainless Fabrications approximately 20,000 litre nominal capacity vertical 316L stainless steel fermenter/bioreactor, approximately 15,000 litre working capacity with (4) zone limpet coil jacket. Unit has a welded dished top and bottom. Internal rated -1/+3barG internal operating at 0-159degC. Internal coils rated -1/+5barG and limpet coils rated -1/+5barG operating at 0-159degC. Mixer Drive = Nominal Speed: 100 RPM; Motor: 55KW 1500RPM 250 IE3 IP55 3PH 230/400V 50HZ; Gearbox Input Coupling: Integral w/Gearbox; External Paint Finish: Standard Paint; Colour: Blue RAL5005 Mounting = Arrangement: Structural Nozzle w/Flange Shaft Seal = Mechanical Seal: Custom Seal - No Bearing Balanced (AES CDM C/SiC/C/SiC-AFLAS(3) - Double Mechanical Seal. ) Mounting Flange = Flange Size: DN400 [16”]; Flange Class: CL-150; Flange Material: 316 Stainless Steel Face & Core Shaft = Shaft Diameter: 4-1/2”; Shaft Extension: 6754 mm; Shaft Material: 316 Stainless Steel Impellers = Impeller #1: 921 mm BT-6; Impeller #2: 959 mm W-4; Impeller #3: 959 mm W-4; Impeller #4: 959 mm W-4; Impeller Material: 316 Stainless Steel Mixer Options = Gearbox with Food Grade Lubricants Design Compliance = Machinery Directive 2006/42/EU Specifications: Capacity: 15,000 L Type of stainless: 316L Internal Pressure: -13 bar Internal Temperature: 0°C Jacket Pressure: -15 bar Jacket Temperature: 0°C Diameter: 1,800 mm Straight Side: 5,900 mm Legs/Lugs: Mounted on (4) legs Weight: 6720kg Dimensions: 2400mm diameter x 7500mm height Nwodpfx Aasyln E Rsrsk

Year of construction: 2021, condition: like new (used), functionality: fully functional, Specification Capacity 30 Ton Nwsdoziahdepfx Aarok Working length 1300mm Stroke length 100mm Throat depth Maximum open height without tools Fast speed of beam Bending speed Return speed 200mm 300mm 100mm/s 10mm/s 90mm/s Backgauge travel 300mm Length 1500mm Width 1200mm Height 1910mm Approximate weight 2000kg Machine equipped with Cybelec CybTouch 8 control (X & Y axis) Top and bottom tooling Light guards

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,159 h, pressing force: 229 t, total width: 2,788 mm, total height: 3,310 mm, overall weight: 21,800 kg, product length (max.): 5,475 mm, Press brake manufactured in 2007. This Bystronic Hammerle 225 3P 4100 features a pressing force of 2250 kN and a bending length of 4100 mm. The machine includes hydraulic die and punch clamping systems, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the Bystronic Hammerle 225 3P 4100 machine we have for sale. Contact us for further details regarding this machine. • Note: Nameplate shows 3100 mm, but seller confirms 225/410 configuration (4100 mm) • Machine structure: • Distance between uprights: 4200 mm • Throat depth: 250 mm • Standard installation height: 917 mm • Standard stroke: 400 mm • Ram thickness: 80 mm • Below-floor installation: No • Table: • Working height with WZ 86 mm tooling: 1056 mm • Table width: 93 / 108 mm • Table height: 130 mm • Lower beam thickness: 160 mm • Movements: • Max approach speed: 150 mm/s • Max working speed: 10 mm/s • Max return speed: 150 mm/s • Y-axis tolerance: ±5 µm • Clamping system: Hydraulic die clamping (standard), Hydraulic punch clamping (standard) • Electrical / Utilities: • Connected load: 40 kW • Operating voltage: 400 / 480 V AC • Frequency: 50 / 60 Hz • Rated slow-blow pre-fuse: 80 A • Hydraulic oil: 600 l • Compressed air: 0.6 MPa • Condition: Machine operational Additional equipment • Bending aids: Nedpfx Aajzwm D Iorswk • Right bending aid (operational) • Left bending aid (installed, not operational) • Tooling package (Hämmerle): • Straight upper tooling, code 001-005: approx. 5,410 mm total • Gooseneck upper tooling, code 014-005: approx. 2,905 mm total • Bottom die set, code 007.20-02: approx. 4,735 mm total • Bottom die set, code 013.00-03: approx. 4,825 mm total • Bottom die set, code 016.10-01: approx. 3,225 mm total • Tooling suitable for various bending applications and material thicknesses Technical Specification Bending Length 4100 mm

Condition: used, Year of construction: 2007, machine/vehicle number: MR007003, For sale: A very complete Weinig Powermat 500 (year of construction 2007). Thanks to the increased planing capacity (300x160mm) and extensive mechanization, this is the ideal production line for professional woodworkers, carpentry workshops, or timber frame construction companies. Installation can be arranged upon consultation. Key specifications: - Large capacity: Maximum processing size of no less than 300 x 160 mm (ideal for heavy timber, joists, and wide parts). - Spindle arrangement (5 axes): Bottom (11 kW) – Right (7.5 kW) – Left (7.5 kW) – Top (11 kW) – Bottom (7.5 kW). - Including oscillating axis: Equipped with a moving spindle with an input measuring system. Enables efficient processing of boards with varying/tapering widths with minimal wood loss. - Combined spindle mounting: Equipped with a PowerLock quick-change system on both bottom spindles and the top spindle. Conventional mounting ø 40 mm side spindles. - PowerCom Control: Graphic touchscreen for quick profile changes and digital management of tool settings. - 1-Man Operation: Including automatic return system. - Including accessories: Supplied with straight planing heads (bottom jointing cutters) and an extra horizontal PowerLock axis. Machine manuals are available. Technical specifications: - Number of planing axes: 5 Nodpfx Aajzwv Euorowk - Order of planing axes: B-R-L-B-B - Maximum planing width: 300 mm - Maximum planing height: 160 mm - Feed rate: 5-30 /min - Serial number: 109200

Condition: new, Taylor 6/2.5m Clamp Carrier System For Solid Wood Edge / Face Laminating. A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating, the Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a pneumatic clamp tightener / loosener, pneumatic component flattener and air motor drive for rotation. On request the machine can be specified with a working width of 3.1m and also with 12 working sections. Nwsdpfx Ajdy Dtrjarok 2.5m (8.5ft wide) 6 section frame. 36 x 302 type clamp arms with 90mm (3.5") high jaws and 1015mm (40") max. opening. (6 clamps per section). 1 x 80U type swing style pneumatic clamp tightener and component flattener with push button operation. 1 x 80AA pneumatic motor drive rotation. Front rest - manually operated. Pneumatic joy stick control for rotation / forward reverse. CE safety perimeter guards to sides / rear

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Nodpfxeb Tmrvo Aarewk Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Heavy duty splicing press for producing long lengths of timber Nsdepahmhopfx Aarjwk Simple to use Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener Nwedpfx Asru Evgearok - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request Nwjdpfxob Evnkj Aarjk