Used Wmw Heckert Cwk 400 D for sale (59,172)

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 18 h, actuation type: electric, controller manufacturer: Trotec, laser type: CO₂ laser, laser source manufacturer: Trotec, laser hours: 10 h, laser power: 120 W, laser wavelength: 10,600 nm, working length: 1,016 mm, working width: 610 mm, working height: 305 mm, feed rate X-axis: 259 m/min, feed rate Y-axis: 259 m/min, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, type of cooling: air, warranty duration: 24 months, Equipment: CE marking, emergency stop, We are offering this virtually new Trotec Speedy 400 engraving and cutting machine with a factory warranty. It is located in a sufficiently dust-free environment with the correct temperature and humidity. Machine data as of October 1, 2026: - Total machine operating time: 18 hours and 8 minutes - Total laser source operating time: 9 hours and 21 minutes Gedpfx Aioz Il Aujvobu - Total registered travel distance: 241,066 meters Model: Speedy 400 Manufactured: March 2026 Country of origin: Austria Mains voltage: 230 V AC Frequency: 50/60 Hz Rated power: 2100 W Wiring diagram: 8086_Speedy400_wiring Laser type: CO₂ Laser power: 120 W Wavelength: 10.6 µm Pilot laser power: ≤0.99 mW Pilot laser wavelength: 655 nm New price: €76,040 If you have any questions or would like more information, please send a message or call. The pick-up date will be arranged in consultation. Two industrial fans for air extraction can also be included.

Condition: used, Technical details: number of spindles: 1000 bore capacity in steel (diameter): 32 mm bore stroke: 200 mm range of revolution per miute: 63 - 1000 U/min bore capacity in cast iron: 50 mm drill spindle - Morse Taper: MK4 spindle throat: 315 mm spindle distance: 475 mm Gbjdpfow Th Nlox Aivou number of drilling stations: 3 headstock adjustment: 280 mm feed:: 0,08 - 1,25 (9 Steps) mm/U distance between table/spindle: 710 mm table surface area: 450 x 560 mm total power requirement: 12,4 kW weight of the machine ca.: 3,1 t dimension machine xH: 2,15 x 1,40 x 2,65 m The previous owner removed a drill spindle with box from the gang drilling machine! *

Condition: used, Year of construction: 2009, type of input current: three-phase, total height: 2,150 mm, total length: 2,710 mm, total width: 1,200 mm, overall weight: 2,300 kg, cutting range round steel at 90°: 360 mm, feed length X-axis: 2,600 mm, opening width: 400 mm, saw band length: 5,730 mm, saw band width: 34 mm, saw drive: 3,000 W, working height: 720 mm, For sale is a fully automatic horizontal metal bandsaw from the manufacturer Kaltenbach, model KBS 400 DG-NA, manufactured in 2009. The machine is suitable for sawing steel, cast iron, non-ferrous metals, as well as pipes, profiles, and solid material. The automatic material feed and hydraulic workpiece clamping enable efficient and precise series production. The cutting speed and hydraulic saw feed are continuously adjustable. Miter cuts are also possible. Technical data: Manufacturer: Kaltenbach Model: KBS 400 DG-NA Year of manufacture: 2009 Machine number: 305285 Cutting range, round, at 90°: 360 mm Cutting range at 90°: 400 × 350 mm Cutting range at 45°: 280 × 350 mm Saw band dimensions: 5,730 × 34 × 1.1 mm Cutting speed: 15 to 90 m/min Working feed: continuously adjustable up to 400 mm/min Feed length per single stroke: 2,600 mm Gbjdpfx Aiszmf Uqjvou Saw drive: 3 kW Working height: 720 mm Dimensions: approx. 2,710 × 1,200 × 2,150 mm Weight: approx. 2,300 kg

Condition: new, clamping range of chuck 120 - 380 mm height 95 mm daylight 170 mm external diameter Futter 400 mm Godefv Awtepfx Aivjbu external diameter Spannhebel 600 mm weight 26 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Condition: ready for operation (used), functionality: fully functional, DELTA LC 400 / Rotary table grinding machine -Max. grinding diameter 400mm -Magnetic chuck -Grinding height / distance between table and grinding wheel approx. 230mm -Spindle speed 2850 rpm -Fine feed 0.01mm -Distance between column and grinding wheel axis approx. 320mm -Spindle motor 3 KW -Grinding wheel dimensions 200x80x78mm Gbedpfoz Nkf Esx Aiveu -Machine enclosure -Coolant system -Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight 700 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2003, functionality: fully functional, overall weight: 225 kg, faceplate diameter: 400 mm, DIVIMEK Meca DCN-400 NC rotary table Gjdpfx Aijzn Iv Hovobu Previously used on a Hedelius machine with Siemens 840D control Fully functional Includes ROD encoder Available for immediate delivery

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm Gjdpfx Aov U Un Hjivebu workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Gbjdjlatz Dopfx Aivou Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Condition: used, Technical details: Gbodpfx Asu N Ebdjivou table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm Gbedsu N E Abopfx Aivsu *

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake Gbsdpfx Ajxm Rzijivsu -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: like new (used), Year of construction: 2024, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 574525, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, total length: 3,500 mm, total width: 2,100 mm, table load: 500 kg, Gantry Eagle 400 including MultiChange Light handling system, year of manufacture 2024. Serial No.: 574525 Serial No. handling system: 583328 Total weight approx. 6000 kg including handling system Commissioned: 04/2024 Accessories: MultiChange Light handling system, 70 electrodes and 8 pallets The machine is being sold on behalf of the owner. Attractive offer – flexible & worry-free We offer not only a high-quality product, but also tailor-made financing options that are adapted to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. Godpjz Dazdjfx Aivobu On request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes and errors!

Condition: good (used), functionality: fully functional, Honing machine SZS 200X500D Gbjdpey D A Niefx Aivsu

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Gewicht - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Godpfx Aiju A I Eljvjbu Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Gbedpfx Aiox Acpdoveu Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Condition: excellent (used), Miyachi Unitek HF25 DC Resistance Welding System controller. The unit is fully functional, starts up correctly, the display works, and all functions respond as expected. The screen displays the message “EMERGENCY STOP – OPERATOR ACTIVATED,” which indicates that the emergency stop circuit has been activated – this is not a malfunction of the device. Godpfx Aezma Sdeivebu This model is designed for precise control of the DC resistance welding process. It features a clear display, numeric keypad, the ability to program welding parameters, and RS-232 and RS-485 communication interfaces. Power supply: 380–400 V AC, 50/60 Hz. Technical specifications: Manufacturer: Miyachi Unitek Model: HF25 Type: DC Resistance Welding System Power supply: 380–400 V AC, 50/60 Hz Max. output current: 2400 A RMS Max. open-circuit voltage: 10 V Interfaces: RS-232, RS-485 Inputs include: FOOT SWITCH, AIR VALVE DRIVER, VOLTAGE SENSE, WELD HEAD Condition: Fully functional. Visual condition matches the photos – normal signs of use. The power cord has been repaired (insulated area visible in the photos). The repair does not affect the operation of the device, but this information has been included for full transparency of the sale.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Kaltenbach KBS 400 NA metal bandsaw, automatic (2020) Manufacturer: Kaltenbach Type: KBS 400 NA Year of manufacture: 2020 Condition: used, very good, operational Bandsaw blade (mm): 5,730 x 41 x 1.3 mm Motor power (kW): 4 Cutting speed (mm/min): 15-90 Bandsaw blade feed rate (m/min): 0-300 Gsdezww Auepfx Aivjbu Swivel range: 115° Round stock 90°: 350 mm Round stock 45°: 350 mm Square stock 90°: 400x350 mm Square stock 45°: 315x350 mm Working height: 720 mm Weight: 3600 kg CNC-controlled cutting angle adjustment Separately driven chip brush Automatic material feed gripper with a stroke length of 2,600 mm for single stroke Hydraulic blade tensioning Electronic bandsaw blade slippage monitoring

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Gjdpfxoziww Nj Aivjbu Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: used, Year of construction: 1998, Serial No. 174520, control unit, manufacturer Arburg, closing force 400 kN, screw diameter 20 mm, sprue picker, manufacturer TecnoMatic, type micro cnc, vacuum separator, manufacturer Piovan, type DPA20, year of manufacture 2016, microprocessor control, 2 temperature control units, internal numbers 14 and 19, F, drying cylinder, desiccant dryer, manufacturer Piovan. Gbjdpfez Hl H Rsx Aiveu

Condition: used, max. load 200.000 N Gbedpfx Aozzq Uxjivju 0 275x120x75 0 weight 12 kg

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional Godpfxsxn Awxo Aivjbu • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter: 920 mm, Lathe type WMW DLZ 800 III for sale. Equipped with Heidenhain digital readout. The machine functions flawlessly and has seen very little use (mainly for maintenance). Includes faceplate, 2x steady rests, several tool holders, and operating manual. - Heidenhain digital readout - Turning length: 3150 mm - Weight: approx. 7300 kg - Power: 13/20 kW - 380 V - Swing over bed: 800 mm - Swing over gap: 920 mm - Swing over cross slide: 530 mm Gedpey Ar Niefx Aivebu - Spindle bore: 90 mm - Tailstock MK-6 Loading by forklift. Shipping possible by arrangement. Please feel free to contact me with any questions.

Condition: used, turning diameter over slide rest 800 mm Gedpjv H Etdjfx Aivobu Control Siemens 802D swing diameter 2000 mm centre height 1000 mm

Condition: used, Year of construction: 1965, faceplate diameter 5300 mm swing diameter 6300 mm turning height 2800 mm slide adjustment 1700 mm table load 50 t turning speeds 0,3-14 U/min Feed 0,056-10 mm/U digital readout Sony Rest 2 total power requirement 120 kW weight of the machine ca. 187 t No:11670009-05rer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Gsdpsyqt R Aofx Aivsbu About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Godpemi Rpiofx Aivsbu 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t