Used Ventilation Duct Flange Ring for sale (6,833)

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin -Outer diameter: 315 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm Gkoded Hcq Njpfx Aivec -Weight: 16 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate Gsded Hcq Ujpfx Aivjkc -Outer diameter: 250 mm -Short taper flange for: bayonet disk mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 11 kg

Condition: used, Flange mount Gkjdpjd Hd Nksfx Aivoc -Chuck flange for: jaw chuck -Outer diameter: 270 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 21 kg

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min Gksdpfxoxrd Rne Aivec • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Godpfsxg Icksx Aivokc Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Condition: excellent (used), Year of construction: 2014, Flanging and dishing machine LUCAS - RD-3800 R MACH-ID 9280 Make: LUCAS Type: RD-3800 R Control: Siemens Simatic Year: 2014 Gkedpfsxta E Rsx Aivjc Maximum diameter 3800 mm Minimum diameter 710 mm Thickness 40N/mm2 up to 6 mm Thickness 30 N/mm2 up to 8 mm Thickness 70N/mm2 up to 5 mm Flanging height 90 mm Working speed flanging 0 - 20 M/Min Working cutting speed 0-30 M/Min Tooling package included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Gkedpjxv A T Nefx Aivoc Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: new, Hohner stitching heads Gjdpfx Aioxwxurevokc condition as shown in the photo

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm turning length 1000 mm turning dia. in gap 460 mm Gkodpfx Aisy Tyyqjvec spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min power requirement 7,5 kW bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m weight of the machine ca. 1,9 t Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws

Condition: good (used), Year of construction: 2008, machine/vehicle number: 082429, functionality: fully functional, overall weight: 1,260 kg, year of last overhaul: 2025, Equipment: CE marking, SCM Olimpic K500 – Edge Bander – Year 2008 For sale: SCM Olimpic K500 edge bander, year 2008. Reliable and robust machine, ideal for joinery workshops and industrial production. ✔️ Fully functional ✔️ Ready for use, requires no work ✔️ Always carefully maintained ✔️ Excellent overall condition The machine will be available from June. Godpoy Sph Iofx Aivekc Perfect solution for those seeking a professional edge bander that is immediately operational. 📍 Inspection and test operation available upon request. 📞 For more information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1990, Length:2000mm Width:1500mm Height:1500mm Gkjdpfx Ajzc Iw Ujivoc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Gkodpfx Aioy Hlvwovjc Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal double-column band saw designed for professional use in metalworking. It is suitable for the precise cutting of solid material, tubes, and profiles, and stands out for its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously adjustable cutting speed from 17 to 110 m/min, it is highly versatile. The powerful 7.5-kW saw motor, the hydraulic workpiece clamping system, and the 150-liter cooling lubricant system ensure reliable and economical operation. Weighing 2,100 kg, the HBP 430N offers high stability and is ideally suited for daily use in metal fabrication, steel construction, and mechanical engineering facilities. Technical Specifications HBP 430 N Working range at 90° (round): Ø 430 mm Working range at 90° (flat): 600 × 430 mm Gjdpfxjzq S Nco Aivokc Working range at 45° (flat): 320 × 430 mm Minimum material dimensions: 15 mm / 10 × 15 mm Minimum cut length: 10 mm Remnant length: approx. 40 mm Cutting speed: 17–110 m/min Coolant tank: 150 l Belt tension: 80 bar Saw motor: 7.5 kW Hydraulic motor: 2.2 kW Coolant pump: 0.12 kW Chip conveyor 0.09 kW Rated power approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse rating 35 A Cable cross-section: min. 4 × 6 mm² Band saw blade dimensions: 5,800 × 54 × 1.3 mm Machine weight: 2,100 kg Workpiece support height: 700 mm

Condition: excellent (used), mileage: 192,053 km, color: blue, lifting height: 30,400 mm, axle configuration: 4x4, Year of construction: 1998, operating hours: 25,341 h, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 35.850 kg Functional Lifting capacity: 5.000 kg Dimensions of cargo space: 1280 x 260 x 400 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Counterweights - Hook blocks = Remarks = Spierings SK365-AT3 * 1998 Gkedpfxezd T R Is Aivec * 25,341 operating hours * Diesel and 400 Volt drive * 3 axles * Manual transmission * 6x6x4 drive/steering * Lifting capacity 5,000 kg * Point load 1,700 kg * 33.4 lifting height * 30.4 meters horizontal reach * 192,053 km * Includes documents and maintenance history

Condition: new, DEMAG brake ring / brake pad / conical brake pad - 50 pieces (new). 1. Type: KB 160 - 2 pieces. Gjdpjyy Takofx Aivskc 2. Type: KB 100 - 2 pieces. 3. Type: KB 200 - 2 pieces. 4. Type: KB 140 - 2 pieces. 5. Type: KB 125 - 5 pieces. 6. Type: KB 112 - 1 piece. 7. Type: KB 90 - 2 pieces. 8. Type: KB 80 - 11 pieces. 9. Type: No. 405 - 1 piece. 10. Type: No. 616 654 - 5 pieces. 11. Type: No. 620 606 - 7 pieces. 12. Type: No. 612 648 44 - 6 pieces. 13. Type: No. 628 626 44 - 2 pieces. DEMAG brake cover / brake lid - 38 pieces. Various sizes (new / used).

Condition: ready for operation (used), * Brand: Radial Gedpfx Aioywm H Esvjkc * Model: ventilator * Driving: 19 kW

Condition: used, New spare parts for DEMAG DKUN5 - DKUN 5 (KMK71) Spare parts for the repair of a DEMAG crane, chain hoist Suitable for DEMAG chain hoist DKUN5 Scope of delivery: 1x Shaft-coupling-KMK set 1x Stand set KMK / P = 12600633 1x Runner set KM71 B2 = 12845833 1x Fan set KM71 = 12882233 1x Driving dog KM71 = 12876033 1x Thrust ring set KM71 = 12885233 1x Bearing shield set KMP 71 BS = 12861433 1x Chain guide set LDKUN D5 = 83628033 Gjdjzinw Tspfx Aivekc 1x Small parts set KMK 71 B2 = 12878533 Weight 11.5 kg G

Condition: excellent (used), JD manufacturing kettle crisps batch fryer. Gas fired. 55-60kg every 8-10 mins depending on product. With pumps and Valve systems. For "hand cooked" crisps. Frying area is approx. 1.2 m wide x overall length 3 m. I can supply the whole line for producing crisps 1ton a hour. Gsdpez E Skgjfx Aivokc

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finish sanding Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Bookbinding machine with combined unit and electronic articulated pressure bar, edge segments can be switched on and off Segment width of the pressure bar 35mm Contact roller can be pneumatically adjusted, low wear due to corrugated steel roller Gksdpfozqvmrsx Aivoc Grain compensation Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed steplessly adjustable via frequency inverter from 2.5 - 13m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the outlet Constant working height 900mm by adjusting the upper part of the machine, thus also integrable into sanding lines Feed belt still has good grip and is in very good condition Maximum sanding width approx. 1340mm Workpiece height approx. 3 to 150mm Common sanding belt dimension 1360 x 1900mm 3 rubberized pressure rollers Infeed roller table and foldable outlet table Preparation for vacuum blower. The belt is perforated and plugs for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE marking Operating manual without the illustrated connection cable Original paint, only touched up in places Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Gkedpfxjz Ib R Ie Aivjc Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: new, functionality: fully functional, power: 26 kW (35.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 630 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 200 rpm, rotational speed (min.): 20 rpm, total height: 2,700 mm, total length: 2,650 mm, total width: 4,385 mm, overall weight: 6,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the High-Performance Bandsaw HBM540A SpeedCutting Technology (optional) Gedpfxjz Rzq Ie Aivskc By combining SC-Performance saw band guides, a high-performance coolant system, dynamically controlled feed rate, and a specially optimized auto-feed control, you can achieve maximum performance and tool life from the saw band used. Prepared for Automation A powerful sawing machine concept places high demands on material handling. The high-performance bandsaw automatons of the HBM series are often configured as automated sawing centers. Therefore, the machines are already equipped in the basic version to connect extensive peripherals. Servo Feed System The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter idle times and more precise feed rates. Your advantage: higher cutting performance and longer band life! Sensitive Behringer Cutting Pressure Control increases the cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the industrial saw to the changing material cross-sections. Due to its arrangement directly at the back of the saw band, the system regulates quickly and precisely. Optimal Chip Removal The highest cutting performance of the industrial saw places high demands on chip removal. The wide, funnel-shaped machine stand allows for free chip flow into the underlying chip conveyor with an integrated coolant tank. The discharge height of 800 mm or optionally 1,200 mm allows the use of large chip containers. Economical Use of Carbide Saw Bands due to the robust design of the industrial saw, the use of the latest servo technology, and well-planned chip removal. Precise Guide System in Portal Design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and maximum service life of the bandsaw. Band-Guiding Parts Made of Gray Cast Iron are made by Behringer and ensure vibration damping directly at the cutting interface, thereby increasing the tool life. Automatic Guide Arm Adjustment This means that the metal bandsaw offers optimal sawing results without adjustment effort - even with frequently changing material widths.

Year of construction: 2026, condition: as good as new (ex-display), ADL AUTOMATIC LINE FOR THE PRODUCTION OF VENTILATION DUCTS So that the rectangular section ventilation duct machine is able to produce flat plates and U-shaped and L-shaped pieces without the need for additional use. It can also produce one type of Pittsburgh L-shape Auto Duct. Previously it is equipped with Servo Motor and Servo Reducer, which avoids making errors in measurements. The bender and guillotine are driven by a hydraulic system. Possibility to choose Z-type or trapezoidal ribbing or both in one machine. Technical Specifications Range of processed sheets: Min: 0.5mm - Max: 1.5mm Minimum sewerage: 100x100mm Gedpfx Aofwmqvsivskc Dimensions: W 2,000mm x D 2,000mm x H 1,500mm Weight: 3,000 kg Power: 2.2 kW servo motor

Condition: new, Ostas Profile Ring Bending Machine OPK 65 Technical Specifications: • Tool holder, shaft: 60mm • Tool: 175mm • Working speed: 5m/min • Motor: 3kW • Dimensions L-W-H: 900x1250x1200mm • Weight: 1080kg • 3 driven rollers • Hardened standard rollers • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Side angle guide rollers • Digital displays (2 pcs.) • Brake motor • Complies with CE standards Gkedpefig Aisfx Aivjc

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Gedpfjdz Spwex Aivekc Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: new, Akyapak Akbend Ring Profile Bending Machine APK 50 Description Gkedpfod Er S Aox Aivoc • Lower roller adjustment, hydraulic – both lower rollers can be adjusted • Suitable for horizontal and vertical operation • Control panel (the position of the lower rollers is displayed) • Standard rollers included • 3 driven rollers • CE marking / Declaration of Conformity • Operating manual Technical Details • Bending capacity: see performance table • Bending speed: 4.4 m/min • Roller diameter: 157 mm • Shafts: 50.0 mm • Total power consumption: 1.1 kW • Weight: 500 kg • Dimensions L-W-H: 950 x 700 x 1220 mm