Used Veb Magnetic Disk for sale (2,767)

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Dsdpey D Rk Isfx Ahgsci Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Year of construction: 1977, condition: good (used), 2 units of emergency power generators, East Germany (GDR) Engine manufacturer: VEB SKL Magdeburg, GDR Type: 8NVD26 A2 Year of manufacture: 1977 Continuous power: 294 kW Maximum power: 323 kW Displacement: 52.96 liters Compression ratio: 14 Speed: 750 rpm Specific fuel consumption: 224 g/kWh Fuel consumption in 8 hours: 640 liters Dcsdpfeigyt Hex Ahgei Boost pressure ratio: 1.38 Charge air temperature after turbocharger: 60°C Generator: Manufacturer: VEM Dessau Type: SSED 509-8a Voltage: 400 volts Electrical power: 330 kVA Power factor (cos. φ): 0.8 Dimensions: Length 4270 mm, Width 1516 mm, Height 2030 mm Total weight approximately 8500 kg per unit !! Further information available only by telephone !!!

Year of construction: 1961, condition: used, functionality: fully functional, machine/vehicle number: 15/15/61, VEB Ellma Double-ended tenoning machine - 1100, manufactured in 1961. Machine designation and size: KS Manufacturing number and year of construction: 15/15/61 Total weight: 5.55 t Wiring diagram: G1-106/1 Sp Wiring diagram code: Lp Voltage type: ~ Frequency: 50 Hz Dcjdpfx Ahezavpgogji Operating voltage: 380 V Control voltage: 220 V Connected power: 15 kW Machine rated current: 28 A Auxiliary machine rated current: 2 A Time-delay fuse: 25 A The used double-ended tenoning machine is in working order; it was mainly used for precisely cutting door components to length. The electrical components have recently been replaced, including a new electrical panel, as well as the feed motor and speed control mechanism. The machine has 2 vertical saws and 8 milling cutters, including 2 horizontal saws.

Condition: good (used), Tool and cutter grinder VEB model SW200 Dcjdequtcljpfx Ahgji

Condition: used, Hand lever shears VEB Scherenbau Nossen type ScDH10 Blade length: 180 mm Sheet thickness: max. 10 mm Flat material: 50x15 mm square solid material: 22x22 mm Dcjdpfsuqrabjx Ahgji Round steel: 24 mm Angle steel: 60x7mm T-steel: 60x7mm on mobile base frame Own weight: approx. 150 kg

Condition: excellent (used), Magnet dimensions: 60 x 20 cm, working area: 22 x 65 cm Dedey Ittgopfx Ahgoci

Condition: used, Year of construction: 1985, Offer 25995 Djdjwp Egujpfx Ahgjci Technical Data: - Pressing force 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm - Max. installation depth with straightening bar 1050 mm - Max. installation depth without straightening bar 1400 mm - Stroke speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. B 3600 x H 1400 x T 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening bar 1300 x 400 mm with over - Threaded spindle, laterally adjustable supports

Condition: good (used), machine/vehicle number: 14012, Offer 14012 Technical data: - Length approx. 3000 mm - Width approx. 1500 mm - Material thickness of the top plate approx. 55 mm - Total height of the ribbed plate approx. 185 mm - Subframe Dcjdpfx Aow Rnf Iohgei - Total height with subframe 730 mm - Weight approx. 3500 kg

Condition: used, Year of construction: 1988, machine/vehicle number: 888, Motor für Sammelhefter Brehmer / Polygraph - Motor for Saddle Stitcher Brehmer / Polygraph Brehmer - VEB LBW 742-745-750Year 1988 - Serial-No. 888C 2/88 VEB CLS256/4-5FK44T Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dodpeh Axzlofx Ahgsci

Condition: used, Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle VEB GR2HVXSN. MA24F165L2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Dodpfxjiwu Ete Ahgjci Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1985, machine/vehicle number: 5028830, Offer 26070 Technical Data: - Max. load capacity in horizontal position: 7500 kg - Faceplate dimensions: 1500 x 1500 mm - Motorized tilting of the faceplate: 0 – 120° - Rotational movement electrically adjustable, stepless: 0.0028 – 1.04 rpm - Right and left rotation - Welding current transmission: approx. 500 A Dodpfeyrfxbox Ahgjci - Drive: 400 V x 25 kW - Table height in horizontal position: approx. 1600 mm - Handheld remote control - Required space approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

Condition: good (used), For sale is an external cylindrical grinding machine of the brand VEB Werkzeugmaschinenbau and of the type SU 200/1x800 The machine is fully functional and ready for immediate use Technical data Grinding diameter: 200 mm Sanding length: 800 mm orbital diameter: approx. 160 mm Djdpfx Asrdf Hgjhgoci Headstock speed: 200-1000 1/min Headstock: MK2 Grinding wheel diameter: approx 330 mm Table size: 900 x 200 mm Dimension: 3050x1300x1430 Weight: 4.6 tons On request, loading and transport (Europe-wide) can be organized for an extra charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Dedjytirnepfx Ahgjci Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: ready for operation (used), Year of construction: 1990, Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible. Dcsdpow U T Ucofx Ahgei

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7486, functionality: fully functional, spindle mount: MK 2, total width: 480 mm, total length: 620 mm, total height: 1,295 mm, overall weight: 165 kg, spindle speed (max.): 2,800 rpm, spindle speed (min.): 450 rpm, stroke length: 100 mm, Solid bench drilling machine for individual or series production in good condition (used). Dcedpfx Ahswgfkuogei

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 52353, Short description: - Working width: 960 mm - Infeed: roll feeding - Opener not included - Discharge into can Dodpfx Ahsw Rkgbjgjci - Machine documentation available Last use (Jan. 2024): - Application-oriented product testing to assess the carding behavior of polyester fibers (approx. 6 kg/sample) - Not a production machine - White types - Untested, for spare parts only! Machine is dismantled and stored, but can be inspected on site. Pickup only in 14727 Premnitz by the buyer, no shipping. If interested, we look forward to your offer. Inquiries in writing only, please.

Year of construction: 1983, condition: not inspected (used), machine/vehicle number: 50960, Short description: - Working width: 960 mm - Infeed: feed roller - Opener not included - Outfeed: carding belt Dcjdjw Rkdyepfx Ahgji - Can deposit - Machine documentation available Last use (Jan. 2024): - Application-specific product testing for evaluating the carding behavior of polyester fibers (approx. 6kg/sample) - Not a production machine - 0.9-3.3 dtex; 32-60 mm (always with constant settings) - Black and spun-dyed types - Untested, sold only for spare parts! The machine is dismantled and stored, but can be inspected on site. Collection only by the buyer in 14727 Premnitz, no shipping. If interested, we look forward to receiving your offer. Enquiries in writing only, please.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel Dcjdpfxou U Hvwj Ahgoi - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Condition: good (used), Working width 40cm Motor 3.5 kW Angled fence Dsdpor Ely Hofx Ahgeci

Condition: good (used), Year of construction: 1971, functionality: fully functional, machine/vehicle number: 12.02-37-31, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, grinding diameter: 125 mm, grinding length: 200 mm, type of input current: three-phase, overall weight: 5,000 kg, workpiece diameter (max.): 125 mm, nominal power: 28 kW (38.07 HP), The machine was used exclusively for grinding piston rods with a diameter of 10 mm. Dcedpfxow E D Euj Ahgei

Condition: good (used), Pressing force: 25 t Cutting capacity: thickness / width: 1.25 / 140 mm Number of strokes per minute: min./max.: 250 strokes/min. Dodpfx Ahjfim Dwsgoci Ram stroke - max.: 20 mm Usable table area: WxL: 440 x 360 mm

Condition: good (used), Manufacturer: WMW VEB Type: FW 200×630 x-y-z travel: 380 – 140 – 230 mm Table size: 200x630mm Dcjdpfxoik Hcus Ahgei

Condition: excellent (used), Machine for grinding bookbinding knives. grinding length 1500 mm. new grinding head. Dcodpfx Ahowm Ht Rogji

Condition: used, Automatic vertical packaging machine for sachets and pouches with bulk products such as spices, powders, sugar, and more. The machine produces four-side sealed sachets. Dsdpfx Aeyipmqshgsci Technical parameters: 1. Output: 35 - 72 pcs/min (2,100 - 4,300 pcs/h depending on size) 2. Sachet dimensions: - width: 105 - 135 mm - length: 150 - 180 mm 3. Portion size: 90 - 240 cm3 – accurate disc dosing. 4. Motor: 600 W 5. Heating elements – power: 3120 W 6. Overall dimensions: - length: 1010 mm - width: 1350 mm - height: 2200 mm - weight: 850 kg - year of manufacture: 1988 The machine is used and in working condition. The date printer requires repair or can be replaced with another date marking unit.

Condition: used, VEB Polygraph 882/2-18 gathering machine 18 gathering stations Features suction feeding Dcjdjx Ab Ncspfx Ahgei 3-phase power, requiring 2-10 kW of power consumption at 440 V