Used Top Control Semi-Automatic Multihead Weigher for sale (62,409)

Condition: new, Model Name Laedpjl Sva Ijfx Amrjc SHARK 331-1 NC 5.0 SPIDER

Condition: new, Model Name Lajdpfegvkafsx Amrjc Shark 332-1 SXI evo

Condition: new, Model Name Shark 282 SXI evo Laedpfx Amsgvkctorec

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. Laodpfxoq Dzi Tj Amrec 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,370 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, controller model: Fanuc 31i-B, Equipment: chip conveyor, Only 3,370 spindle hours! TECHNICAL DETAILS Spindle motor power: 5,500 W Max. spindle speed: 12,000 rpm Spindle bore: 20 mm Bar capacity: 20 mm MACHINE DETAILS Control: Fanuc 31i-B Number of axes: 9 Spindles: 2 Supply voltage: 400 V Dimensions & Weight Footprint: 2,000 x 1,280 mm Machine height: 1,720 mm Machine weight: 3,600 kg Operating hours Power-on hours: 32,700 h Spindle hours: 3,370 h EQUIPMENT Interfaces: Ethernet / RS232 / USB / PCMCIA Chip conveyor 3-color signal lamp Rotary cannon Workpiece picker Workpiece ejector Coolant tank Bar feeder: Iemca Elite 220 (2010) Fire protection system High-pressure unit 70 bar Muller Oil cooling unit Lodpfoyzhlqex Amrsac Circuit diagram Maintenance documentation Operating manual

Condition: used, Yamato 714 Multihead Weigher Fully Stainless Steel | Rigidized | Optional RCU810A Upgrade | Deep-Freeze Ready Lasdpoxdfa Ijfx Amrjc Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments. Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables. The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation. ----- Specifications – Yamato 714 Weighing Heads - 14 heads Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible Speed - Up to 90 weighings per minute (product dependent) Chute Type - Flat chutes (ideal for frozen/hard products); angled chutes available Controller - Optional upgrade to RCU810A (color touchscreen) Build Material - Fully stainless steel, rigidized/dimple-plated finish Condition - Fully serviced and reconditioned – ready to run Applications - Frozen products, meat, seafood, hard candy, root vegetables, and more Product Size - Handles medium to large items (depending on setup) Highlights - Durable rigidized finish minimizes product sticking - Optional RCU810A controller for intuitive operation - Ideal for harsh environments (cold rooms, frozen packaging lines) - Alternative units available for soft/fresh produce (angled chutes) - In stock now – fast delivery possible! ----- 📦 Available Immediately 📍 Inspected and ready at our facility 📞 Contact us for pricing, viewing, or more details!

Condition: used, Yamato 714 Multihead Weigher Fully Stainless Steel | Rigidized | Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments. Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables or flat chutes for frozen products. The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation. ----- Specifications – Yamato 714 Weighing Heads - 14 heads Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible Speed - Up to 90 weighings per minute (product dependent) Chute Type - Flat chutes (ideal for frozen/hard products); angled chutes available Controller - Optional upgrade to RCU810A (color touchscreen) Build Material - Fully stainless steel, rigidized/dimple-plated finish Condition - Fully serviced and reconditioned – ready to run Applications - Frozen products, meat, seafood, hard candy, root vegetables, and more Product Size - Handles medium to large items (depending on setup) Highlights - Durable rigidized finish minimizes product sticking - Optional RCU810A controller for intuitive operation Laodpfx Amex Ifbioroc - Ideal for harsh environments (cold rooms, frozen packaging lines) - Alternative units available for soft/fresh produce (angled chutes) - In stock now – fast delivery possible! ----- 📦 Available Immediately 📍 Inspected and ready at our facility 📞 Contact us for pricing, viewing, or more details!

Condition: used, Dataweigh ADW-410SV – Precision Multihead Weigher for Efficient Packaging Lines The Dataweigh ADW-410SV is a high-performance multihead weighing system engineered for fast, accurate and reliable weighing of products in food, snack, confectionery, pet food and industrial applications. Built for continuous production environments, this machine combines robust design with easy operation to optimize throughput and minimize waste. Key Features & Benefits - High throughput: Designed with 10 weighing heads for efficient combination weighing and rapid fill cycles — ideal for mid-range production speeds. Laodpox Srpuefx Amroc - Consistent accuracy: Achieve reliable portion control and minimized giveaway on each batch. Scribd - Hygienic construction: Built to meet hygiene standards required in food processing environments. Yamato Scale - Operator friendly: Intuitive controls make setup and changeovers fast and straightforward. Yamato Scale - Reduced downtime: Durable components and easy access improve uptime and cleaning efficiency. Yamato Scale Technical Specifications (Typical) (Specifications may vary by configuration and options.) - Model: ADW-410SV Multihead Weigher - Weighing Heads: 10 - Bucket Volume: Approximately 2 liters per head - Construction: Stainless steel frame — suitable for hygienic food environments Yamato Scale - Control Interface: User-friendly operator panel (exact interface may vary by model) Yamato Scale - Suitability: Inline integration with packaging and checkweigher systems Yamato Scale ----- Why Choose the Dataweigh ADW-410SV? - Boost production efficiency with multihead precision weighing - Reduce product giveaway and increase yield - Designed for hygienic, food-grade environments - Easy to operate and maintain * Model: ADW-410SV Multihead Weigher * Weighing Heads: 10

Condition: new, Year of construction: 2026, Semi-automatic piston fillers, 50 ml - 1,300 ml Stainless steel cylinder Tabletop unit Pneumatically/volumetrically controlled dispensing unit Special 3-way valve for viscous or chunky products Up to 600 units/hour, depending on product, fill volume, and operator Laodpfoib A Ipsx Amrec Fill volumes: 0 - 38 ml, 2 - 100 ml, 20 - 680 ml, 50 - 1,300 ml

Condition: new, Year of construction: 2026, semi-automatic labeling machine FL-100 Labeling machine FL-100 Product diameter: 15 – 130 mm Label width: 15 – 200 mm Label length: 15 – 600 mm Lodpfxofnkbrj Amreac Roll diameter: 300 mm Core diameter: 38 – 110 mm Dispensing speed: 4 – 20 m/min Supply voltage: 230 V / 50 Hz Weight: Approx. 36 kg Dimensions: 800 (L) x 500 (W) x 400 (H) mm

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Lajdpfxew H Naao Amrjc Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: good (used), High-frequency ignition device, heating, gas and oil burners, control box, combustion control, burner control -Manufacturer: Landis & Gyr, firing control -Type: LOK16.250A27 -Dimensions: 105/105/H125 mm Ledpfx Amsxnk Eqjroac -Weight: 1.2 kg

Condition: new, Year of construction: 2026, functionality: fully functional, ATTENTION!!! SPECIAL OFFER!!! LAST ONE LEFT!! Lodpfx Asy Tipnemreac Features: Semi-automatic operation Hydraulic control of arm movement (up – down), with smooth adjustment of descent speed Arm position memory function Hydraulically controlled vice jaws Hydraulic cutting clamp included Hydraulic band tensioning Band cleaning brush Cooling system Bimetal band saw CE Declaration of Conformity Technical data: Type: Semi-automatic column type Control: control panel at the front of the machine Maximum cutting diameter: 350 mm, 400 x 350 mm Arm lifting: Hydraulic Arm lowering: Hydraulic Bandsaw speed: 25/60/75 m/min Vise: Hydraulic Min. cutting diameter 5 mm Min. material length in the vise 30 mm Distance from the base of the vise to the floor 780 mm Cutting band dimensions 4515 × 34 × 1.1 mm Total power 5.2 kW Belt speed 25/60/75 m/min Dimensions (L×W×H) 2400 × 1250 × 1550 mm Weight 1200 kg Manufacturer: Cormak

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Lsdpfofiulfsx Amreac Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.350+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on the Kjeldahl method. Automatic, to analyse protein nitrogen in raw material samples or processed material for the food industry. Specific methods available. Results comply with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Lasdpefiliwefx Amrsc Features • Twenty free user programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consumption: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed-door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies, there is the possibility of selling in installments. Price Euro 3.600 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Semi-automatic pallet wrapper Inv. no. 3589 Manufacturer: de Wit Type: WP 2 Laodpfx Aeya Iu Iemrsc Year of manufacture: 2007 * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 2400 mm * Net weight approx. 500 kg * Suitable for Euro pallets and block pallets!!! * Inclusive ramp!!!

Condition: excellent (used), Automatic pallet wrapper Ljdoyc Exiepfx Amreac Ref. no. 3793 Manufacturer: PME Model: PME 35 * Turntable positioning via fixed stop * Number of bottom and top wraps adjustable * Turntable diameter: 1650 mm * Maximum wrapping height approx. 2400 mm * Own weight approx. 450 kg * Suitable for Euro pallets and block pallets!!! * Ramp optional * Very good condition

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, MC100 – Capsule Loader / Filler Semi-automatic filling machine model MC 100 for hard gelatin capsules with 100 holes, enabling the production of up to 3,200 capsules per hour. The machine consists of a loader and a filler, both mounted on a separate base. The machine is supplied complete, including a powder pressing device and an electromagnetic vibrator to ensure uniform distribution of powder into the capsules. The machine is equipped with one capsule format, selectable between sizes 00 – 0 – 1 – 2 – 3 – 4. On request, capsule sizes 000, 5 and DB Caps can also be supplied. Technical data: Single base Machine dimensions: 650 x 380 x 410 mm Net weight: 30 kg Laedpfjyktzujx Amroc Electrical connection: 1 Ph. 230 V, 50 Hz.

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! Lodpfx Ajpa Nxdomroac The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Equipment: - Large support table, high-performance drive motor - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. We look forward to your inquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default Laodeidun Dopfx Amroc this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (partially solid materials). The machine is characterized by its ease of use, quick and convenient material changes, and simple miter angle adjustment. The UK 352 HA has a continuously adjustable miter range of up to 45° to the left and up to 0° to the right. The saw feed is automatically activated by pressing a button, and the material is clamped using two pneumatically controlled vertical clamping cylinders. A minimal lubrication system and an air spray gun for cleaning the machine are included as standard with this machine! Connections for a chip extraction system are also available on this machine. Equipment: • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Incl. 2 pneumatic clamping cylinders (vertical) • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable material stop (rear) • Extraction device - chip extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade 350mm • Saw blade not included! You can visit our production facility/showroom at any time to view the desired system. Please feel free to contact us for this purpose. We look forward to hearing from you! Plantec Maschinen GmbH Laodpfjgwt Rrox Amrjc

Condition: new, Year of construction: 2026, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 130mm • Saw blade 400mm • Saw blade not included! Laodpfx Amegwt Rnerec It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Laodpfx Amogwt Ryjrjc • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: new, Year of construction: 2026, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Lodpjgcbwgofx Amroac

Condition: new, Year of construction: 2026, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Ledjgwt R Depfx Amroac Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.