Used Smh 1600 1600 for sale (2,497)

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity Iodpfjyxdwdsx Aagjat • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: used, Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Iasdpfx Aask Aa Iwsgjt Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 working days Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Iaederc D Nrjpfx Aagot We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Iedpfx Aaet D R R Ssgoat We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2021, condition: ready for operation (used), A Timesavers (Grindingmaster) wide belt grinding machine with two upper wide belt grinding units and one brushing unit is available. Contact roller diameter: 180mm/280mm, grinding belt accuracy: 0.01mm, brushing unit outer diameter: 300mm, brush oscillation: 150strokes/min, brush motor speed range: 8m-22m/s, table height adjustment: 1mm-100mm, grinding belt dimensions X/Y: 1630mm/2620mm. Machine dimensions X/Y/Z: approx. 4300mm/2650mm/2650mm, weight: approx. 5500kg, control: Siemens PLC. Including one IEP nanofilter cartridge extraction system. Documentation vorhanden. An on-site inspection is possible. Iedpfxjy D Tq Rs Aageat

Condition: new, Year of construction: 2024, R5 RA 1600 B 4EB XXXZ 4.00 PCS 05.12.2023 25,000.00 / 1 PCS 100,000.00 Explosion protection Ex Inside II 2G Ex h IIB T3 Gb X Outside II 3G Ex h IIB T3 Gc X Without motor Ex B5-550 d65 50/60Hz Coupling PKZ 20 ATEX Oil separator with: - Antistatic venting element - G3/4 for thermostat probe Heat exchanger 41.2kW without air cooler Base frame with bore d50 Vibration dampers 4xd100 + 3xd150 Cooling water inlet G1/2 vertical with temperature controller Water valve, bypass with ball valves, G1/2 coupling Cooling water outlet G1/2 vertical with G1/2 coupling Ball valve DN25 G1 in oil drain Without temperature switch in gas Without temperature switch in oil Without level switch G3/4 Filter differential pressure gauge elevated with angle Thermometer 0-120°C R1/2 with extension Without resistance thermometer PT100 valve side 4 units available Unit price !!!!! Iajdpfx Aasyzbd Tsgot

Condition: excellent (used), Year of construction: 2017, Year of manufacture: 2017 Reach: 1200 mm Control system: IRC5 Rotary table Dust extraction unit Automatic spray gun V5 HVLP Diaphragm pump DP Comboi Ijdpfx Aajyu Ihwsgjat Quantity: 2 units

Condition: good (used), Year of construction: 2015, functionality: fully functional, Stacker Baumann type NUP 1600, serial no. 53.300, load capacity 1,600 kg, max. format 1500 x 1185 mm. Immediately available. Ijdpfx Aaeyy Sycsgjat

Condition: used, Year of construction: 1998, Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 1998 Designed line capacity: approx. 33,000 bottles per hour Application: Automatic removal of empty bottles from crates in returnable glass lines Bottle Formats 0.25 L Individual bottle – Ø 57.5 × 215 mm 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 L Ale bottle – Ø 68.5 × 234.5 mm 0.5 L Ale bottle – Ø 68.5 × 270 mm 0.5 L Steinie bottle – Ø 70.5 × 174 mm 0.5 L Bavaria bottle – Ø 70 × 260 mm 0.5 L NRW bottle – Ø 67 × 260 mm 0.5 L Individual bottle – Ø 82 × 295 mm 0.7 L GDB bottle – Ø 79 × 290 mm 0.75 L GDB bottle – Ø 79 × 290 mm 1.0 L GDB bottle (light) – Ø 84 × 305 mm 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats 5 × 4 – 400 × 300 × 300 mm 6 × 4 – 400 × 300 × 270 mm 5 × 4 – 400 × 300 × 210 mm 4 × 3 – 355 × 275 × 345 mm 4 × 3 – 400 × 300 × 330 mm 5 × 4 – 355 × 275 × 255 mm 5 × 4 – 400 × 300 × 290 mm Condition: Used, available for inspection Documentation: Available Compliance: CE conformity available Availability: On request Isdpfx Aaeytpc Hogeat

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Iodpfoyx Dz Njx Aagjat Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 04/2027, year of last overhaul: 2022, total length: 1,800 mm, total width: 1,100 mm, total height: 1,550 mm, input current: 32 A, input frequency: 50 Hz, empty load weight: 2,000 kg, overall weight: 2,000 kg, type of input current: three-phase, electrical fuse: 32 A, Spiral Mixer Gostol SM 125 A Iodpfxoyaf Sds Aagjat with bowl trolley TOP kneading machine for up to 200 kg dough Stainless steel bowl and spiral Cover with safety switch 2 timers and 2 speeds Very robust technology Connection: 400V, 32A-CEE plug Dimensions approx.: 1100 x 1800 x 1550/1950 mm (W x D x H) Used machine We have more spiral mixers in stock!

Condition: new, weight max. in kg 1000 kg fork length 1250 mm stroke height 1600 mm high 1940 mm weight of the machine ca. 0,4 t dimensions 1,69 x 0,78 x 2,09 m Pallet truck with Isdpfxoyx Iqbj Aagoat - new 12-volt battery - charger - electric lift - manual drive

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Parts shown by hand not come. Technical details are shown on pictures. Iaedpfx Aaeyfgx Negot

Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm Isdpfxjxabums Aageat oil volume 130 ltr. voltage 400 Volt Control ESA E21 total power requirement 4.0 kW weight 3030 kg range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

Condition: used, functionality: fully functional, power: 100 kW (135.96 HP), fuel type: diesel, color: green, overall weight: 21,600 kg, operation weight: 18,400 kg, Year of construction: 2007, operating hours: 4,990 h, Vögele Super 1600-2 asphalt paver Iodpfx Aey Eqm Neagoat Year of manufacture: 2007 4,990 hours 100 kW Perkins engine 18,400 kg Automatic levelling system Screed AB500-2TV 3,200 kg 5 m hydraulic paving width Extensions: 2 x 75 cm, 2 x 25 cm, total width 7 m Total weight: 21,600 kg Transport width: 2.55 m

Year of construction: 2002, condition: used, This listing is for a Lancer Washer Infeed Type 1600 PCM DPSS The unit is in full working condition and is ready for immediate release. Lancer 1600 PCM Stainless Steel Washer Overview The Lancer Washer Infeed Type 1600 PCM DPSS is a superior pharmaceutical production washer designed to exceed all GMP requirements Ehret Technologies – Trio-Tech International. This industrial-grade washing system is specifically engineered for pharmaceutical and laboratory applications where stringent cleaning standards are essential. Key Features Designed to provide an adequate cleaning process using mechanical, thermal and chemical cleaning properties ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Multi-level washing capabilities for maximum efficiency GMP (Good Manufacturing Practice) compliant design Pharmaceutical-grade construction and validation Chamber Specifications Internal chamber dimensions: 33 5/8"H × 27 3/4"D × 27 3/4"W ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Large capacity design for high-volume processing Multiple rack positions for flexibility Iodsxhfkuspfx Aagsat Construction & Materials 316L Stainless Steel Construction: Pharmaceutical-grade stainless steel throughout for corrosion resistance and easy sanitization cGMP Compliant: Meets current Good Manufacturing Practice requirements Robust Design: Built for continuous industrial use in demanding environments Control System Microprocessor-controlled operation Multiple programmable wash cycles Process monitoring and documentation capabilities Applications Pharmaceutical manufacturing equipment cleaning Laboratory glassware and instrument washing Medical device processing Research facility applications Biotechnology equipment cleaning Technical Specifications Model: 1600 PCM (Pharmaceutical Cleaning Module) Construction: 316L Stainless Steel Compliance: cGMP, FDA regulations Operation: Automated wash/rinse/dry cycles Chemical Integration: Automated detergent and rinse aid dosing Validation: IQ/OQ/PQ documentation available Benefits Ensures consistent, validated cleaning results Reduces manual labour and contamination risk Meets strict pharmaceutical industry standards Large capacity increases throughput Automated operation improves efficiency and traceability This washer represents Lancer's commitment to providing pharmaceutical-grade cleaning solutions that meet the most demanding industry requirements for cleanliness, validation, and regulatory compliance.

Condition: new, motor power: 30performance of pump: 65oil filling: 150messurements (LxWxH): 3700x1500x3200weight approx.: ca. 5000Cylinder: Ø 400pressure: 500Pressure adjustment via rotary knob Motorized control via hand lever Iedeutuy Nopfx Aagjat Handwheel for laterally movable cylinder Hydraulic unit mounted on the lower side next to the frame Clear opening: 1650 mm × 550 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, The Italmeccanica MacPower 6TE/480/1600 is an industrial brushing machine / surface processing line for panels and sheet elements (e.g., MDF, chipboard, wood). The unit is designed for brushing, structuring, and finishing panel surfaces in woodworking and furniture manufacturing processes. Main features and parameters (typical for the MacPower series): • Working width: approx. 1600 mm • Multi-head brushing system (longitudinal and transverse brush groups) • Capable of processing both surfaces and panel edges • Designed for continuous operation in production lines • Robust industrial build, high efficiency, and consistent processing quality • Industrial 3-phase power supply • Typical applications: surface structuring, finishing of furniture panels, door components, wood-based boards The MecPower/MacPower series by Italmeccanica is used in industrial panel brushing lines. Machines are often equipped with multiple brush groups and a working width of 1600 mm, allowing the processing of large sheet elements. Italmeccanica MacPower 6TE/480/1600 Machine type: brushing / structure sanding machine for panels Manufacturer: Italmeccanica (Italy) 🔧 Working data • Working width: 1600 mm • Material pass-through height: approx. 130 mm (typical for the series) • Minimum piece length: approx. 400 mm • Number of working units: 6 • Top units: 2 • Side units: 3 • Longitudinal/transverse units: combination of longitudinal and transverse brushes Ijdpfjykzigsx Aagsat • Edge processing: yes • Rollers/brushes: multizone horizontal and transverse brushes ⚡ Electrical data • Installed power: approx. 11–17 kW (depending on configuration) • Power supply: 3-phase 400 V, 50 Hz • Extraction system: dust extraction ports on the working units 📏 Dimensions and weight (typical for 1600 version) • Length: approx. 3300 mm • Width: approx. 2450 mm • Height: approx. 2250 mm • Weight: approx. 1500–3000 kg (depending on equipment)

Condition: good (used), Rotary vane vacuum pump oil circulation lubricated Manufacturer: Busch Iaodpfx Aaed Hh Nkegst Type: RA 1600 B Status: Refurbished or tested and serviced available Warranty: up to 12 months Suction capacity: approx.1000m³/h Ultimate pressure: approx. 0,5 mbar Operating fluid: Mineral oil (Included) Delivery time: 1-2 Wo.

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions, enabling the implementation of the most demanding bending tasks. Main Features: Front supports: 2 pieces on linear guides, ensuring stability during bending operations Y1, Y2 axis adjustment: automatic Rear stop adjustment (X axis): servo drive on encoders R axis adjustment: servo drive on encoders Automatic adjustment of the deflection arrow Double-sided punch mounting: quick assembly type AMADA, enabling quick tool changes Iasdpfxey Sgp Ne Aagjt Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1300 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 320 mm Maximum stroke of moving beam 120 mm Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 600 mm Engine power 9.5 kW Length 3870 mm Width 1550 mm Height 2460 mm Weight 7400 kg Additional equipment available. Please contact the seller.

Condition: used, Year of construction: 2004, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: Midac, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,400 mm, Weights Empty weight: 3.212 kg Functional Lifting capacity: 1.600 kg Number of valves: 3 Supply voltage: 48 V CE mark: yes Condition Iodpfxjyu T I Ne Aageat General condition: average Technical condition: average Visual appearance: average Other information Fork carriage: Sideshifter Additional information Please contact Bas Sindorf for more information

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Iaodpfx Aasx D E Dyjgst Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Year of construction: 2000, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 1,500 rpm, number of axes: 2, This EMA FN 50/1600 was manufactured in 2000. A robust radial drilling machine with a drilling capacity of Ø 50 mm and an arm reach of 1,600 mm. It features spindle speeds from 38 to 1,500 RPM and a spindle travel of 350 mm. Weighing 3,800 kg, it's designed for precision and durability. Consider the opportunity to buy this EMA FN 50/1600 drilling machine. Contact us for more information. • Drilling capacity: Ø 50 mm • Arm reach: 1,600 mm • Spindle travel: 350 mm • Quill diameter: Ø 70 mm Ijdpfxoygl Eke Aageat • Distance spindle–base: 750–1,450 mm • Cube dimensions: 610 x 770 x 510 mm

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 814 mm, controller manufacturer: HAAS, number of axes: 4, This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. • Table with integrated rotary table 4th axis • Table dimensions: length 1626 mm x width 814 mm • Rotary table diameter: 762 mm • Tool changer: 30 +1 Iajdpfx Aaex D Eppeget • renishaw probe included • Last geometry check by HAAS in 2023Machine still under power Additional equipment • Coolant tank with low and high pressure pumps • 2 chip conveyors with screwrenishaw probe included Last geometry check by HAAS in 2023 Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 640, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis SPINNER MVC 1600-N was manufactured in 2016. Ideal for precision machining, this vertical machining centre ensures reliable performance and durability. Consider the opportunity to buy this SPINNER MVC 1600-N vertical machining centre. Contact us for more information. Additional equipment • Accessories: Chip conveyor Iasdpfx Aaeyallqsget Machine Benefits Technical Machine Benefits • Table size: 1800 x 810 mm • Allowed weight: 2000 kg • Automatic tool changer: atc 24 positions Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes