Vacuum pump 1600m / h

Busch R5 RA 1600 B

Year of construction: 1985, condition: good (used), FILLETING LINE FOR FISH Item: D-1640-Baader-FilletingLine Manufacturer: Baader Consist of Model: 478 Year of manufacture: 1985 Iodpfxsd Dtuhe Ag Doa Has been used for sardines Baader in feed line consisting of: Baader mobile automatic 5 lane infeeder, type: 478 . Baader mobile automatic feeder, type: 478, year of construction: 1985, 400 V, 3 Ph, 50 Hz, 5 A, 5 lanes, lane width: (5x) 40 mm, total dimensions: 3350 mm x 1300 mm x 2450 mm.

Condition: new, The new vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: without Technical data: 2.7 kW 3 x 230/400 V 50 Hz 1500 rpm Oil return suction in non-return valve housing Gas ballast Incl. level switch Final pressure: 0.1 mbar Iedsttzxrjpfx Ag Doa Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. Ijdpfxjnfvx Nj Ag Dea The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that installation be carried out by trained personnel only. Adaptation material available on request. Oil filling: M-VAC 100 Technical data: 7.5 kW 3 x 190 - 208/380-415V/220-240V 50 Hz incl. gas ballast in B-cover incl. level switch cooler reduced Iedpfx Agsipu Ume Dja Ultimate pressure with open gas ballast: 1,5 mbar Ultimate pressure with closed gas ballast: 0.82 mbar Subject to prior sale! This offer is only valid for customers within Germany and European countries!

Condition: good (used), For sale is a container bundle consisting of 3 x 20-foot containers. The units are insulated office or residential containers, each featuring a single-leaf entrance door and a secondary door with wind protection on one end, as well as two tilt-and-turn windows on the opposite end. The containers are fully equipped and ready for use, with electrical wiring (including fuse box), multiple power outlets, lighting, and electric radiators. Previously used as residential containers, they are in good, weather-tight condition. Each container features an exterior 400-Volt connection (with pass-through available). The listed price applies to all three containers when purchased as a package. Iedpfxjh Hx Nhj Ag Dja Transport can be arranged upon request. The containers can be delivered to your desired location and positioned precisely using the crane mounted on the delivery vehicle. Any additional transport costs due to distance will need to be clarified in advance.

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9518 202-5, Offer 24361 Technical data: - 3 individually motor-driven rollers manual + controlled operation - Max. Torque per roll 1600 Nm - Stroke of bending roller X-axis approx. 265 mm - Lower rollers laterally adjustable 200 - 1000 mm Iedpfx Aet Nfv Tsg Dsa - Shaft diameter 105 mm - Roll diameter up to approx. 260 mm - Effective length of standard shafts approx. 300 mm - Shaft rotation infinitely variable 1 - 22 rpm - Bending capacity e.g. - Round tube 1" Ø 350 mm - Round tube 4" Ø 2000 mm - Flat bar 300 x 15 Ø 600 mm - Roller drive 400 V / 3 x 1.1 kW - Hydr. drive 400 V / 3 kW - Weight approx. 1200 kg - Weight of accessories approx. kg - Space requirement approx. W 1250 x H 1400 x D 1700 mm - with: - PC 100 control unit in separate control panel - Lateral straightening rollers horizontally + vertically adjustable - Standard bending set for flat and angled material - Steel + plastic tube roller sets

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: Iodpfx Aong A R Sjg Doa - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: good (used), Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Iedpodnv D Sefx Ag Doa Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image)

Condition: good (used), Oil diffusion pump Manufacturer: Leybold type: DIP 50,000 Status: used Technical data Product: DIP 50000 cat. No.: 22240 Suction side connection flange: DN 1000 ISO-F Connection flange printed page: DN 160 ISO-K Pumping speed for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l / s Iedpjdnv A Ujfx Ag Dsa Working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final total pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Maximum permissible forevacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Resources: Pump delivered without resources Amount of resources min: 12.0 l 12.7 qt Max: 25.0 l 26.4 qt Power supply: 3-ph Y, 400 V, 50/60 Hz Heating power: 24 kW Number of cartridges: 24 Heating-up time: < 30 min Number of cooling circuits: 3 Minimal cooling water Pump: 1500 l / h 6,6 gal / min Jets Hat vapor barrier: 150 l / h 0.66 gal / min Cooling water pressure: 6 bar 87 psi Cooling water connection Pump: 1/2 ", internal thread Jets Hat vapor barrier: 3/8 ", internal thread Dimensions: see outline drawing Weight: 560 kg 1235 lbs

Condition: used, Rotary vane vacuum pump - oil lubricated Manufacturer: Leybold Type: Sogevac SV 200 Cat. No.: 10927 Status: Refurbished Warranty: 12 months Ijdpfx Ajcnyy Hsg Dsa Included: Oil filling (mineral oil), operating manual with list of initial files Voltage: 50/60Hz 230-400/460V Motor rating: 4 KW N. suction capacity: approx. 200 m³/h Final pressure without gas bellow: approx. 0,08 mbar Delivery time: ex stock