Used Semi-Automatic Aluminum Circular Saw for sale (31,396)

Condition: new, - Semi-automatic - Saw blade 600 mm - Double miter - 4 pneumatic clamps - Mist lubrication system - Roller conveyor 300 cm with length stop - Blow gun - Automatic protective cover - Documentation - 400V Hjdegg Rdcspfx Ad Rsn

Condition: new, - Semi-automatic - Saw blade 500 mm - Double miter - 4 pneumatic clamps - Mist lubrication system - Roller conveyor 300 cm with length stop Hjdegg N Scepfx Ad Rsn - Blow gun - Protective cap - documentation - 400V

Condition: new, saw blade diameter 400 mm capacity 90 degrees: round 135 mm capacity 90 degrees: square 130 mm 200 x 80 mm saw blade turning speeds U/min total power requirement kW weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 1,8 x 1,95 m Hjdpfx Adevn U Hvs Ren Automatic circular saw with - Feed type RB 1500 - Roller conveyor 1500mm Good condition

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg Hodpfjycqhcsx Ad Ren

Condition: used, Year of construction: 2016, saw blade diameter 360 mm cutting width at round material 15 - 100 mm cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO total power requirement 21 kW weight of the machine ca. 3,4 t Hedpfxjv Nq Rms Ad Rjn dimensions of the machine ca. 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Material discharge Chip conveyor

Condition: used, Year of construction: 2005, Technical Data: Cutting capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest residual piece length: 35 mm Total connected load: 2.0 kW Saw motor, frequency-controlled: 1.5 kW Infinitely variable cutting speed (frequency-controlled): 20 - 110 m/min Saw band dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Hjdox Irx Ijpfx Ad Rjn Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, upper part fully raised: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Features: - Infinitely variable cutting speed - Saw band guides made of carbide, replaceable - Hydraulic saw feed - Mechanical saw band tensioning - Machine light - Saw band cleaning via freely rotating, easily replaceable wire brush - Coolant supply via 1 coolant nozzle and 1 coolant hose, coolant tank capacity approx. 45 l, pump capacity 16 l/min - Minimum quantity lubrication - Infeed roller conveyor (1000 mm) and outfeed roller conveyor (2000 mm) with scale and length stop

Condition: like new (used), Year of construction: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Blade cutting speed: 1700/3400 rpm Hjdpfewu Tz Rex Ad Ren Cutting angle: from -45° to +45° Cutting capacity: at 0° – round: 120 mm, square: 105 mm, rectangle: 180x70 mm Touchscreen Machine weight: 605 kg

Condition: used, Year of construction: 2012, Technical data: Cutting range round / square / rectangular ø: 400 / 350 x 350 / 380 x 300 mm Saw blade dimension: 650 x 50 x 2.5 mm 3 stroke speeds: 40 / 62 / 90 strokes/min Hodpfx Adsyditte Ren Drive power: 3.0 kW Footprint (WxDxH), approx.: 1800 x 650 x 1250 mm Weight, approx.: 1050 kg Equipment: - 3 stroke speeds - Infinitely variable cutting pressure adjustment - Minimum quantity lubrication - Pre-tensioned plate guide for the saw frame - Dustproof enclosed gearbox - Accelerated return stroke of the saw frame - Enclosed oil hydraulic system - Coolant device - Limit switch - Automatic lifting of the saw frame - Miter device up to 45° - 1 new saw blade

Condition: used, Year of construction: 2007, Technical data: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Hjdperwlwvjfx Ad Rjn Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Condition: used, Year of construction: 1989, saw blade diameter 320 mm cutting diameter 140 mm total power requirement 3 kW Hedpfxew Dvivo Ad Rsn weight of the machine ca. 0,5 t

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm Hjdpermkl Ajfx Ad Ron

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2038, Offer 24272 Hjdpot H Ibmsfx Ad Rsn Technical data: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm

Condition: good (used), Year of construction: 2008, machine/vehicle number: 21100122-F, Offer 25108 Technical Data: Hodpfowq N Swox Ad Ron - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° round 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° round 110 mm - flat 135 x 60 mm - Bevel adjustable left + right 45 ° - Tiltable bevel adjustment of the saw head for ship cuts left - Pneumatic vises - Discharge – roller conveyor with length stop 2000 mm - Feed – roller conveyor 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 25320, Offer 25282 Technical data: - Saw blade diameter: 600 mm - Cutting range at 90°: 190 x 190 mm / 100 x 310 mm Hodpfx Adexcwk Ae Ron - Mitre cut at 45°: 170 x 170 mm / 100 x 220 mm - Saw blade speed: 2800 rpm - Drive power: approx. 4.5 kW - Required space (approx.): W 1470 x H 1800 x D 1550 mm - Weight (approx.): 450 kg - Digital angle position indicator - Pneumatic system with pneumatic clamping cylinder - Saw blade - Outfeed roller conveyor with length stop and digital display, 5000 mm

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm - Maximum profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Radial feed movement from bottom to top - Saw motor drive power 7.5 kW - Infinitely variable blade speed adjustment - Metered spray unit - 2 vertical and horizontal clamping devices, each with pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually operated safety guard Technical data: - Drive: 7.5 kW Hodpfxsx Eb Ano Ad Ron - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with guard open: 2450 mm PD200-E-7 length measuring system - Usable as a stop as well as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target length, actual length, and quantity - Positioning accuracy 0.1 mm/m - Piece counter for number of completed pieces / cuts

Condition: new, Year of construction: 2023, SPECIAL PRICE, Stock machine Year 2023, Condition: new List price + option minimal lubrication system LUBETOOL: €15,370 STOCK MACHINE – Fully Automatic Aluminium Circular Saw 90° Cut With easy, safe operation and excellent cutting performance. This machine is only capable of 90° cuts! Technical data: ● Cutting capacity: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3,000 rpm ● Feed: Single-stroke feed 300 mm (double stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade size: 350 x 32 mm Standard features: ● Machine for 90° cuts, equipped with a powerful drive motor ● Clear, large-sized control panel ● Adjustable cut-off length from 5 to 300 mm via handwheel and counter Hsdpfx Asvurgyod Rsn ● Main vice with 3 pneumatic clamping cylinders: 1 horizontal, 2 vertical ● Feed vice with horizontal and vertical pneumatic clamping cylinder ● Large safety guard, fully covering the working area, pneumatically lifted ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for extraction system Optional, mounted on stock machine: ● Minimum quantity lubrication system "LUBETOOL" with one pump and pressure regulation

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade max. carbide 500/550 mm Drive power saw motor: 6 KW Saw motor speed in 6 stages: 2400- 3200 min-1 Saw blade cutting speed (500-550 mm): 3800 - 5500 m/min Saw blade feed steplessly adjustable 0-40 mm/s Saw height control infinitely adjustable fully electronic Working area square 90° max.: 160 x 160 mm Working area flat 90° max.: 380 x 60 mm Working area round: 90° max.:165 mm Feed length: 10-9999 mm Feed speed AC servo max. 400 mm/s Compressed air connection on site 6 bar Weight(saw)approx.:2850 kg Dimensions LxWxH(saw)approx.:2900mm x 1725mm x 2200mm Footprint LxW 2900mm x 1725mm The machine is in mint condition, both technically and visually, after a completed retrofit. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The positioning system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter Hjdpfxsuiy Rqo Ad Rjn - Replacement of the frequency converter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve terminals - Overhaul of the extraction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the soundproof cabin The machine also has - Soundproof cabin - Zero point adjustment (manual) Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Chain magazine for 4/6m materials - Splitting extension (for a high-quality cut surface without return marks) - Horizontal clamping saw line - Cut stop in material feed unit - Reinforced motor 11 KW - Roller conveyors - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Hjdouiy Nyepfx Ad Ren Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), Year of construction: 2025, Complete Overhaul 2025 Saw Blade: 350 - 400 mm Motor Power: 6.5 / 8.5 kW Speed: 1,500/3,000 rpm Cutting Speed: 1,650 – 3,800 m/min Saw Height Adjustment: Electronic Working Range Square, max.: 120x120 mm Working Range Flat, max.: 200x100 mm Working Range Flat, max.: 250x70 mm (for extra width only) Working Range Round, max.: 130 mm Saw Feed Rate: 0 – 40 mm/s, infinitely variable Cut Length: 5-600 mm (up to 9,999 mm with multiple strokes) Feed Speed, max.: 500 mm/s Weight: approx. 1,300 kg Dimensions (LxWxH): 1,800 mm x 1,300 mm x 1,950 mm The machine will be completely overhauled in our facility and will subsequently be in as-new condition. The following components, among others, will be renewed: - Conversion to PLC control - Conversion to Siemens HMI operator interface - Conversion to ball screw with servo drive - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the machine enclosure The machine additionally features: - Soundproof enclosure - Spacer extension (for high-quality cut surfaces without return marks) Optional: - Multiple clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic feeding of raw materials up to 6 m long - 7.5 kW motor - 12 kW motor - Delivery and installation at your site - Training for your staff Hsdpfxoxpqzhs Ad Ren

Condition: excellent (used), KASTOmicut U 2.6 – Semi-Automatic Pivot Frame Bandsaw incl. Long Roller Conveyor For sale is a heavy-duty, semi-automatic pivot frame bandsaw KASTOmicut U 2.6. The machine features infinitely variable cutting speed and is ideally suited for all cross-cutting and mitre tasks (-45°/+60°) on pipes, profiles, and solid materials in workshop environments. The fully hydraulic saw feed and hydraulic material clamping enable semi-automatic, sensitive, and tool-preserving sawing operations. — Features • Hydraulic saw feed • Rotary table as material support • Hydraulic material clamping • Infinitely variable cutting speed • Mitre cuts to both sides from +60° to -45° — Technical data • Dimensions (L × W × H): 760 × 1620 × 2040 mm • Material support height: 950 mm • Total weight: 510 kg • Total power: 2 kW • Cutting speed: 20 – 110 m/min • Saw band dimensions: 3,180 × 27 × 0.9 mm • Saw band guides: Side and back roller guides, replaceable • Material clamping: Mechanical • Saw feed: Hydraulic, continuously adjustable • Saw band tension: Mechanical • Saw band cleaning: Fitted with a replaceable wire brush — Cutting capacities • 90° round (solid/pipe): 160 / 260 mm • 90° flat (W × H) (pipe): 310 × 260 mm • 90° square (solid/pipe): 160 × 160 / 260 × 260 mm • +45° round (pipe): 220 mm • +45° flat (W × H) (pipe): 200 × 200 mm • +60° round (pipe): 140 mm • +60° flat (W × H) (pipe): 140 × 140 mm • -45° round (pipe): 240 mm • -45° flat (W × H) (pipe): 200 × 260 mm • -45° square (pipe): 210 × 210 mm • Minimum remnant length: 30 mm — Condition & Delivery The machine is in perfect working condition and ready for immediate use. • Shipping on a pallet by freight forwarder possible Europe-wide • Additional machines available – check our listings for more offers — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices plus VAT. Subject to change and errors excepted. Hsdpfx Adjxizabs Ron

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm Hodpfsfg Rlcex Ad Ron capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: as good as new (ex-display), Year of construction: 2026, Very robust and easy to use semi-automatic hydraulic double mitre band saw. Hydraulic saw feed and saw pressure separately adjustable, Vice can be operated hydraulically and manually, 2 saw band speeds as standard, material stop swivelling, Coolant device and chip container Main technical data: Sawing length up to 260 mm Sawing height up to 220 mm Saw diameter up to 220 mm Power 1,4 KW Dimensions lxwxh 1250x640x1300 mm Also available in other sizes (320 and 450 mm) Ask for a non-binding offer. We offer delivery, service, spare parts and saw bands from one source. Our postcode areas in Germany are 17,18,19,23 Hjdpfxjgk A Rwo Ad Rjn

Year of construction: 2022, condition: new, functionality: fully functional, Completely new machine, packed. Did not suit our room since it is not installable two ways. Bought from KATOMSK AS Hsdpfsyrb Swjx Ad Ron

Condition: new, Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Basic equipment: - Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre) - band tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - Height limitation of the saw frame by means of potentiometer from the control panel - hydraulic cutting pressure regulation (solid material - pipe) - Lowering of the saw arm via hydraulic cylinder; stepless adjustment - Lifting of the saw arm manually after the cut - easy manual shifting of the vice R/L - electrical band tension control with saw band breakage control - coolant pump with double feed to the saw band guides - carbide saw band guides and guide rollers - Bi - metal saw band M 42 - chip brush Hjdpod Dpz Sofx Ad Ron Technical Data ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 Drive power: 1.5KW//400V//50 Hz Belt speed: 20-120 m/min infinitely variable Saw band dimension: 3125 x 27 x 0.9 mm Remaining piece length: 20 mm Smallest ø: 5 mm Material support height: 775 mm Dimension: 1700 x 1500 x 2100 mm Weight: 410 kg

Condition: new, - Fast cutting saw for solid material / profile up to 75mm Hedpjggytqofx Ad Ron - autom. loading magazine for bars up to 6300mm length and 3t weight - feed via ball screw - single stroke with 600mm - SIEMENS - electronics / drive / control - good parts / first cuts are sorted - on request with conveyor unit for sawn parts - robot connection possible - incl. suction