Used Say-Mak Workshop Press for sale (17,621)

Condition: defective spare-parts repository (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: 21236, overall weight: 15,000 kg, empty load weight: 5,320 kg, Ludden&Mennekes LM 24 L – 24 m³ compactor container | Defective / for repair For sale: Ludden&Mennekes LM 24 L compactor container, manufactured in 2014, with a capacity of 24 m³. This heavy-duty compactor container is offered as a defective/repair item. The machine has damage to the compaction section and needs to be technically repaired before further use. The container itself is robustly built and may therefore be of interest to a company that can repair the machine itself, for refurbishment, or possibly as a donor/parts machine. Technical data: Brand: L&M Type: LM 24 L Year of manufacture: 2014 Machine number: 21236 Capacity: 24 m³ Power supply: 400 V / 50 Hz Motor power: 5.5 kW Nominal current: 11.3 A Bjdpfsz Eq N Uox Aa Ijln Maximum fuse rating: 25 A Weight: approx. 5,320 kg Permissible total weight: 15,000 kg Heavy-duty industrial design Known defects / damage: The compactor container is explicitly offered as defective. The machine has, among other things: the breaking edge pushed up/deformed; the compaction block is bent and dented; the lids are deformed and damaged; visible signs of wear, rust, and paint damage are present. The damage is shown as accurately as possible in the photos. The machine is therefore sold in its current condition, with repair necessary before it can be put back into normal use. Due to the large capacity of 24 m³ and the heavy-duty construction, this machine may be of interest as a refurbishment project, repair item, or parts machine. Inspection is possible by appointment. For additional information on the technical condition or the existing damage, please do not hesitate to contact us. Keywords: Ludden Mennekes, Ludden + Mennekes, L&M, LM24L, LM 24 L, compactor container, 24m3, 24 m³, waste compactor, container compactor, defective compactor container, repair item, refurbishment project, waste compaction, recycling, parts machine.

Condition: good (used), Mäder DLP 1700 HV Direct-acting compressed air press Press Bedod Tam Nspfx Aa Ieln Direct-acting compressed air presses are used wherever the compressive force is required constantly over a longer distance or where a large immersion depth is required: e.g. when pressing in pins, bushings and ball bearings or when deforming. DLP 1700 HV Direct acting compressed air press Pressure force at 6 bar: 17 kN Working stroke: H mm: 40/60/80 More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Bljdpfegrkigjx Aa Ijn Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm Bedpfx Aasw Smuko Ijln total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 2003, Technical details: pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Blodpfx Aaezgvhus Ion Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Bedienung über Schalttafel *

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. Blsdpfx Ajyzzh Eja Isn It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Year of construction: 2001, condition: used, Technical details: lifting capacity: 0,15 t span width: x. 1200 mm arm length:: max. 1200 Lifting height: 2400 mm stroke speed: handgesteuert weight of the machine ca.: 0,42 t dimensions L x W x H: 2,2 x 0,75 x 1,65 m Engine hoist / engine crane Welded sectional steel Lifting movement via lifting beam pneumatic vertical movement (pneumatic pressure cylinder) via hand knob Load hook type SIKA 1, cable safety device movable, braked in vertical position of the drawbar, double wheel swivelling 90° right/left, front area 2x wheels fixed Bsdpfeu Nvixjx Aa Isln Accessories 2x various lifting straps and 1x chain length approx. 950mm *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t Bjdpsu N A Uusfx Aa Ijln stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel Bljdpfx Aaeu N Ddwj Ien accessory: - foot plate 2200x1500x40mm *

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min table surface area: 900x640 mm throat: 355 mm Bjdou Nfi Uepfx Aa Ijln ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: Bedju Nfklspfx Aa Ioln - column punch device *

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate Bjdpeu Nfm Tjfx Aa Isln - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Condition: used, Technical details: pressure: 80 t dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation Bedpfxou Nfnwj Aa Isln *

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available Bodpfxsu Nfn Rs Aa Ioln i.D. *

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t Bodpfxju Nfp Io Aa Ijln dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Technical details: Blsdpeu Nfwlofx Aa Ien Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: E16352-1, Avermann AVOS SP-12 stationary baling press | Overhauled in 2023 | Not used since For sale: Avermann AVOS SP-12 stationary baling press, manufactured in 2010. This robust Avermann baling press was overhauled by us in 2023 and has not been used since. This makes it an interesting machine for those looking for a well-maintained used baling press that can be put back into operation immediately. The AVOS SP-12 is a robust baling press, suitable for compacting various waste streams and ideally applicable in industries such as manufacturing, logistics, production companies, and waste processing. Technical specifications: Brand: Avermann Type: AVOS SP-12 Year of manufacture: 2010 Blodjz Eqr Aspfx Aa Ijn Serial number: E16352-1 Power: 7.5 kW Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic press system Large feed opening Suitable for transport with a hooklift Special features: The machine was overhauled by us in 2023. After this overhaul, the baling press was not used and has remained idle since. Visually, the machine is in good, used condition. There are, of course, some minor signs of wear that are consistent with the age and type of machine. A great opportunity for companies looking for a professional Avermann baling press at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, AVOS, SP-12, baling press, waste compactor, container press, waste compaction, recycling, compactor, press system, self-compacting container.

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm Bodevc Awxepfx Aa Ioln height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm Bsdjvt Nvpjpfx Aa Ioln clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: good (used), functionality: fully functional, Net price: 1,100.00 EUR Gross price: 1,309.00 EUR You will receive a proper invoice. Internal article number: 26093 Pneumatic press Schmidt Pressing force: 32 kN Stroke: 100 mm Connection: 220 V Ram holder: D20 mm Table: 300 x 220 mm Hole in table: D50 mm Dimensions (L x W x H): 35 x 60 x 130 cm Weight: approx. 100 kg Bsdoz E N Dwspfx Aa Ieln Fully functional. The pneumatic hoses should be replaced as they are partially porous. You are welcome to inspect the press while it is powered on, in our heated warehouse covering an area of over 500 m².

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms safety distance 176 mm Condition: used Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale! Bodpjzdvcajfx Aa Isln

Condition: reconditioned (used), 20 cubic meter skip loader container with usable volume for roll-off tippers Beringer BPx5 Reconditioned, inspected, and serviced Two-sided mounting Side-hinged discharge door Ramp operation possible Machines are reconditioned, inspected, serviced, and repainted in the desired standard RAL color. Bjdjwifmzepfx Aa Isln We will gladly prepare an offer including delivery.

Condition: ready for operation (used), Year of construction: 2026, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel Blodpeztfbwofx Aa Ijn -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Bodpfod Ih H Sjx Aa Ioln

Condition: ready for operation (used), Year of construction: 1992, Immediately available ex-works: Hydraulic single-column press, Edelhoff Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressing force 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive 7.5 kW Weight 6 tons 4 guide bolts of the upper ram are broken. These would need to be unscrewed and replaced. Bledjz Huy Hjpfx Aa Ijn Apart from that, the machine is in perfect working order. Price: EUR 2,000.00 plus VAT, ex-works.