Used Round for sale (3,830)

Condition: used, Tool steel, round material, shaft cut Shaft, steel block, sawn shaft Cold work tool steel 1.2842 Material section Ø 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material designation: 90MnCrV8 Cold work tool steel with high hardenability and good dimensional stability during hardening Used in toolmaking for cutting, punching, and embossing tools. Rollers and profile rolls, measuring tools, guide rails, paper cutting knives. Condition on delivery: annealed to max. 229 HB Tensile strength as delivered: 770 N/mm² Hardening: 790–820 °C Tempering: 220–260 °C Working hardness: 58-62 HRC Soft annealing: 680-720 °C - Medium alloyed cold work tool steel - Oil-hardening Dedsgmi U Sopfx Afkjuu 4 pieces available, price per piece.

Condition: new, - Capacity 700 x 2 mm - Conical rolling - Removable top roller - Foot control Dujdpoihv Hpefx Afkeu - Emergency stop - Documentation - 400V

Condition: new, - Capacity 1070 x 2 mm - Conical rolling Dujdpfxohc Uvme Afkju - Removable top roller - Foot control - Emergency stop - documentation - 400V

Condition: new, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, side roll diameter: 140 mm, roller diameter: 140 mm, roller length: 2,070 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, - Capacity 2070 x 4 - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamp) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamp) - Continuously adjustable speed - Hardened rollers - Tapered rollers - Removable top roller Dujdehvr Nlopfx Afkou - Brake motor - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, roller diameter: 180 mm, - Capacity 2070 x 8 mm (minimum diameter 900 mm) 2070 x 6 mm (minimum diameter 270 mm) Pre-bending capacity 2070 x 6 (minimum diameter 900 mm) Pre-bending capacity 2070 x 4 (minimum diameter 270 mm) - 4 rollers - Hydraulic - Hardened rollers - Diameter of upper roller 180 mm - Diameter of lower roller 180 mm - Diameter of side rollers 150 mm - Digital display for the movement of the left roller - Digital display for the movement of the middle lower roller - Digital display for the movement of the right roller - Upper roller is hydraulically foldable - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down Removal system with middle and side rollers - Hydraulic balancer system - Overload protection - Documentation Dusdsvn Eqrspfx Afkou - 400V

Condition: new, Year of construction: 2025, - Capacity 1070 x 5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital display for rear roll movement - Hardened rolls - Conical rolling - Emergency stop - Documentation Dsdpfjgg Nv Sox Afkjuu - 400V

Condition: used, Anvil with round and square horn Standard anvil, Bohemian design Face width: 160 mm Face length: 530 mm Horn length: 250 mm Anvil weight: 190 kg Height: 350 mm Base: 430 x 310 mm - 28 mm square hole for anvil tools Dedpfxsyk Hrms Afkjuu - Drop-forged, hardened Dimensions (L x W x H): 780 x 310 x 350 mm Anvil weight: 190 kg Good condition, very bright ring, good quality

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 35 kg, load capacity: 150 kg, working range: 520 mm, We are offering these two new Tiger Hebezeuge BGRS-0150520/270 lifting devices for round material, year of manufacture 2024. Manufacturer: Tiger Hebezeuge Model: BGRS-0150520/270 Year of manufacture: 2024 Condition: new Dusdpsx Rzndofx Afksu Category ID: 666 Type ID: 1309 Type: Lifting device for round material If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable Dujdpfx Afeycfyaekou -Hole: Ø 32 mm -Dimensions: 320/280/H75 mm -Weight: 13.3 kg

Condition: new, Model Name Dodpfegvkbcox Afkjuu Shark 282 CCS

Condition: new, Model Name Shark 281 CCS Duedpfx Afjgvkchskju

Condition: new, Model Name SHARK 331-1 NC 5.0 SPIDER Dodpfxol Sva Ie Afkouu

Condition: new, Model Name Duodpfx Afegvkafekeu Shark 332-1 SXI evo

Condition: new, Model Name Dsdpfx Aogvquwjfkeuu Shark 332-1 CCS

Year of construction: 1991, condition: used, table load 3000 kg swivelling range 360 Grad vertical motion range 1380 mm stroke speed 1900 mm/min 360 ° total power requirement 4 kW weight of the machine ca. 5400 kg dimensions of the machine ca. 3800 x 3700 x 4200 mm Clamping plate distance: 2800 mm Dsdsvuz N Djpfx Afkouu Support arm rotation angle: 360° - Operating instructions

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Dujdpfxex S Dxbe Afkou Length: mm Width: mm Height: mm Machine weight: kg Standard configuration Extended machine accessories

Condition: new, Year of construction: 2018, Attachment suited for: Agricultural machines Duodpeyaugkefx Afkeu

Condition: new, Attachment suited for: Agricultural machines Dusdpfx Ajyaud Nsfkeu

Condition: excellent (used), Year of construction: 2015, Complete Cheese Production Line – High-Quality, Semi-Hard Cheese This fully integrated production line, including controls and electrical systems, was engineered and designed by Asepto Germany and constructed by ASTA Eisman Germany in collaboration with Schwarte. The line features Siemens S7 controls and color touchscreen HMI operation panels for precise and user-friendly operation. Installed in a factory that was not yet fully operational, the line has seen minimal use from 2015 to 2023, primarily for demonstrations, ensuring excellent condition and longevity. • Year of Manufacture: 2015 • Cheese Weight: 4–5 kg and 10–12 kg • Cheese Types: Semi-hard varieties, including Gouda, Edam, and similar Duedjxnyr Hjpfx Afksu This production line offers a ready-to-use, reliable solution for high-quality cheese manufacturing with minimal additional setup required.

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Djdpfx Afofu Iwmokeuu

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Dsdpsfu Swxefx Afkjuu Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 E Fully automatic drilling machine, measuring length 6000mm (2-axis NC drilling machine) Item No. 6019 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X and Y values ​​or calling up a program that has already been written, the machine works completely independently. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. Djdpfxjfu Irzj Afksuu • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 2-axis control incl. LAN interface for data transmission Pneumatic vice (span 200 mm) Alternatively also available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV Alternatively also with Unimax 4 Basic (For technical data see data sheet) anti-rotation device tapping device motorized height adjustment NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile as dirt protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / Mounting bracket / roll width 407 mm / insert plates / struts Roller diameter 50 mm / steel rollers It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Djdpjfu Itbofx Afksuu Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: used, machine/vehicle number: 6742, Graduation in degrees ,minutes and seconds Diameter 400 mm Dimensions :L. 500 x W.650 x H.160 mm Weight 70 kg Dujdpfobzfqdjx Afkou

Condition: used, optical rotary table Diameter 450 mm Dujdpjdtr I Sefx Afkeu Height 160 mm Documents available