Used Pavan Pasta Processing Machine for sale (69,737)

Condition: good (used), Year of construction: 1992, functionality: fully functional, Offered is a Kolbe SW D-114/2 meat grinder, V2A stainless steel. 2 speeds, 400V, 6.5/9 kW, 16A. The machine is in good condition and ready for immediate use. Further details on request. Payment in cash or in advance! Ncodpey Dvdaofx Amnot Sale to businesses only. No guarantee or warranty.

Condition: good (used), functionality: fully functional, Offered is a bacon slicer by Treif, model: Piccolo, with 3 pairs of cutting frames. The machine is fully functional and ready for immediate use. See photos. Workshop tested. Further details on request. Nsdpjy Dvbxofx Amnjct Cash or prepayment. Sale to businesses only; no warranty, no guarantee.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Bone saw Berkel / Mado MKB 650 Nodpfsy Du T Tjx Amnect 16A. 380V. Workshop-tested, defects corrected. Motor brake. Saw blade new. Year of manufacture: 2002 Inspection and test run possible by prior phone arrangement! Cash or advance payment! Sale only to commercial customers, no warranty, no guarantee.

Condition: excellent (used), functionality: fully functional, Offered is a K+G Wetter SM-65STL meat cutter. The machine is made entirely of stainless steel with an ejector and is ready for immediate use. Power supply: 380V, 63A, 24kW. Steplessly adjustable knife shaft: 50–5000 rpm. Mixing/reverse mode: 50–500 rpm. Two-speed bowl: 9/18 rpm. 6-knife head. Further details on request. Payment in cash or in advance! Sale to business customers only. No guarantee, no warranty. Ncsdsy Du S Ajpfx Amnet

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Offered here is an angle grinder meat mincer K & G Wetter MWW-130 with sorting unit, 2-speed. Motor power 19 kW, 50A, 400V. Hopper approx. 200L. See photos. Throughput approx. 3500 kg/h. 5-piece cutting set with separator. 2x E-Wolf knives. Workshop-tested and immediately ready for use. Further details available on request. Payment in cash or advance payment! Ncjdpfx Ajy Du R Ssmnjt Sale only to business customers, no guarantee, no warranty.

Condition: excellent (used), Year of construction: 2019, Kolbe 52-120. 7.5kw 2019. Hardly done any work. Very clean and well looked after Ncedpjypc Arsfx Amnot

Condition: refurbished (used), Cutter CFS GEA 325V VACUUM After capital renovation. 3-month warranty on parts. All bearings and sealings in this machine are new. General overhaul of the vacuum pump, actuators and hydraulic pump. Nedpfx Ajvgu Nusmnect New electrical cables. New hydraulic cables. New control panel and controls. New set of knives.

Condition: refurbished (used), total length: 2,200 mm, total width: 2,180 mm, total height: 2,100 mm, warranty duration: 6 months, overall weight: 2,200 kg, power: 36 kW (48.95 HP), year of last overhaul: 2023, K+G Weather MAW160 The machine is offered as overhauled. Feeding is included in the price. (On the pictures you can see a sample machine) Ncsdpfx Aop S Ndaomnjt Errors and prior sale reserved. All information is non-binding. The accuracy and correctness of the information and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: refurbished (used), Krämer+Grebe WW200 The machine has been completely overhauled. All ball bearings and seals on the machine have been replaced. Nodpfx Amepuf Iujnsct The interior has been completely repainted, and the exterior has been polished. Equipped with a 200L trolley (cutter wagon). Inspection is, of course, possible by appointment. Subject to errors and prior sale. All information is non-binding. The correctness and accuracy of the provided information and prices are not guaranteed. Warranty and/or liability is excluded. The machine remains our property until full payment has been received.

Condition: used, Year of construction: 2006, machine/vehicle number: 409/1335, K+G Wetter D114 Meat Grinder – Powerful, Reliable, Ready for Immediate Use For sale is a professional industrial meat grinder K+G Wetter D114, ideally suited for butcheries, meat processing, catering, and production facilities. Condition: Used, very well maintained. Regularly serviced, technically flawless, and ready for immediate operation. Features: - Processing of fresh and chilled meat - Compatible with various hole plates (different degrees of grinding) - Reverse function to prevent blockages - Continuous product feed - Consistent, high-quality mincing results without overheating Nsdpfoy Em T Uox Amnsct - Suitable for integration into production lines - High throughput rate Characteristics & Benefits: - Powerful industrial motor - High capacity for large volumes - Stainless steel housing – hygienic and easy to clean - Simple and intuitive operation - Reliable continuous operation - Quick and easy disassembly for cleaning and maintenance This machine is the ideal solution for professional users who value quality, efficiency, and reliability.

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, machine/vehicle number: I - 02245, total length: 581 mm, total width: 776 mm, total height: 996 mm, overall weight: 145 kg, input voltage: 230 V, cooling capacity: 1.6 kW (2.18 HP), Flake ice maker with cleaning system, capacity approx. 250 kg flake ice in 24 hours. Suitable for operations with a high flake ice demand, such as butcher shops, bakeries, etc. Refrigerant: R 404 A - 1.5 kg. Shipment on pallet, costs to be borne by the buyer. Ncjdpfx Amoyybiaenot

Condition: used, Year of construction: 1976, functionality: not functional, Widmann saw blade sharpener model HKS 700 Nsdpfx Amoy Swlnenjct

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Ncjdpfxsb A Nx De Amnst -Power: 0.23 kW -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 829 h, Baader 588 Filleting Machine 2020, low hours, with spares Complete with IS026 Header Baader 61 knife sharpener 6 station trimming Line Infeeds/outfeeds, various conveyors Compressor Rare package! Nodsyq Sbyjpfx Amnect

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, - Vacuum filler Handtmann type VF 616 - Output approx. 3,600 kg/h – Filling pressure approx. 45 bar – Power: 6 kW / 3 x 400 V / 50 Hz - PCK-3 control monitor - Filling hopper 350 l – split – 90/350 l - Weight compensation Nedeykz T Ejpfx Amnect - Vacuum pump Busch 16 m³. - Lift for 200 l standard trolley type 83-6, stainless steel - Twisting gearbox type AG 410 / stainless steel - Holding device type HV 414 including 2 x filling tubes + brake / stainless steel - Deflection device with deflection rollers / stainless steel - Casing loading device DA 78-6 – stainless steel - Year 2015 / Completely reconditioned in 2026 !!! with original spare parts - Made by Handtmann !!! - Complete accessories + documentation - Metal separator Liquiscan-VF – included for free

Condition: reconditioned (used), Year of construction: 2020, The DMK 20 C table cutter is the ideal solution for small to medium-sized meat processing businesses, upscale gastronomy, as well as large kitchens and catering, due to its compact, robust, and precise design. Its well-engineered construction offers users virtually unlimited versatility in all application areas. The machine is equipped with two independently operated, powerful motors, providing a wide range of control options. With the optional robust, mobile base frame, the desired mobility is ensured. You will receive an invoice with VAT shown. Our used equipment service for you: • 6 months warranty on electrical components, limited to the replacement of defective parts, excluding removal and installation costs • High-quality branded equipment at fair prices • Professional overhaul, inspection, and expert cleaning • Tested and fully functional – or your money back • Flexible shipping or self-collection options • Expert advice – before and after purchase • Provision of operating instructions, wiring diagrams, and spare parts • Safety inspection in accordance with DGUV V3 Professional engineering in a compact space: The DMK 20 C2 table cutter is distinguished by its exceptionally smooth and low-vibration operation, even at high speeds. The elaborate manufacturing of each component is carefully and precisely matched. The thick-walled cutter bowl, cast from high-quality stainless steel, provides extremely accurate concentricity, enabling tight adjustment of the cutting blades within the bowl radius. Small cutter, big performance: The powerful motors deliver the highest torque, even with challenging materials. Vibration-damping machine feet, the heavy, double-walled cutter lid, and the Plexiglas noise reduction cover all significantly reduce operational noise and emissions. The clearly arranged control panel with push buttons and the easily readable analog thermometer ensure efficient operation with a broad spectrum of applications. Machine features: • Completely stainless steel construction • Massive cast stainless steel bowl (Bowl capacity: 20L) • High-precision, maintenance-free cutting system • Stainless steel knife head with 6 blades • Tight cutting tolerances within the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Plexiglas cutter lid Nedpfxsyx A Rio Amnect • Analog, clearly readable thermometer • 6 stainless steel knives, 7 stainless steel spacer rings, two bowls Drive & Controls: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning purposes when the lid is open • Separate bowl drive with directly mounted, maintenance-free gearbox • Two speeds, independently switchable • Large, easy-to-use push buttons with easy-to-clean protective covers Technical specifications: • Bowl volume: 20L • Usable fine sausage emulsion capacity (approx. kg): 16kg • Number of knives: 6 • Speed (rpm): 1500/3000 • Knife shaft power (kW): 3.3/4.5 • Mains voltage (V): 400 • Control voltage (V): 24 • Fuse: (A) 16 (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 115cm with mobile base on castors • Weight: 260 kg • Serial number: S18092 • Year of manufacture: 2020 • Model: DMK 20 C2

Condition: refurbished (used), For sale is a servo-hydraulic mold carrier, completely overhauled by Optitek. Technical data: Current state-of-the-art: after full overhaul in 2026 Closing force: 600 kN Stripping force: 300 kN Hydraulic operating pressure: max. 250 bar Clamping area: 2,000 x 1,000 mm Parallel stroke: 750 mm Opening width: 1,350 mm Upper platen tilt: 45° Lower platen tilt: 30° Total permissible tool weight: max. 100 kN Max. upper tool weight: 50 kN Travel speed: 160 mm/s Machine dimensions (L x W x H): 3,000 x 1,600 x 3,400 mm Machine weight: 8 tons Electrical connected load: 45 kW Operator side: one-sided Tank volume: 800 liters The following services have already been performed as part of the mechanical overhaul: Nedpfxoy Ax Ife Amnoct · Disassembly of the mold carrier · Sandblasting of the mold carrier · Inspection of weld seams and restoration to proper condition if necessary · Cleaning, priming, and painting of individual mold carrier components: - Frame: RAL7035 (light grey) - Press ram: RAL3000 (flame red) · Replacement of all bearings and bushings · Refurbishment and resealing of drive cylinders · Assembly of the mold carrier

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, Satrind 8/25 Twin Shaft Shredder, 18KW Motor (brand new) 30 x 50 mm 1 pick blades. Cutting Chamber 758mm x 700mm machine built onto stand with hydraulic ram that can be operated independently of control panel by a remote control. The machine has been completely refurbished with new blades, resharpened new bearings, seals & safety switches fitted & can be seen working. Ncjdpfxjwxfgge Amnet Ideal for plastic drums, crates, bins. For price contact seller for more information & a video of the machine operating if required.

Condition: excellent (used), Year of construction: 2019, ■ V310 plate processing machine (including 2 gantry beams of 5.500mm and side trucks) ■ This V310 plate processing machine is capable of processing plates up to 3.000mm x 34.000mm ■ X-rail (37.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table with drilling supports (3.800mm x 35.360mm, 1 pcs, suitable for ≥ 350A cutting) ■ Donaldson fume extraction unit DFPRO12 - 200L (2 pcs) ■ Gantry beam 1 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) Ncsdsym Nf Ispfx Amnot ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers) Gantry beam 2 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Driven suspension (1 pcs, servo motor driven) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers)

Condition: reconditioned (used), functionality: fully functional, Portioning shackle (for broiler processing) OEM No.: 3972909 / 3972900 We sell portioning shackles, which are original products that have undergone complete refurbishment. The following spare parts are included in this category: - Closing device - Baseplate Nodpsy Szx Ssfx Amnsct - Block - Shafts - Pins - Arms - Shackle - Bolts - Spring Price is per piece. Larger quantities are available upon request. MAREL / STORK / POULTRY / SLAUGHTER / REFURBISHMENT / GOOD CONDITION

Condition: good (used), JBT Stein TM3 batter mixer. Direct from closed fried food factory, this machine was used for making tempura batter for a line producing chicken burgers for McD. 2011 machine but the factory closed down in 2016. Ncsdpfx Asu Iax Ijmnjt

Condition: ready for operation (used), functionality: fully functional, The Carnitech C400 Grinder is engineered to meet the demands of industrial operators seeking efficient and consistent grinding with high throughput. Once integrated into a processing line, the C400 allows for precise handling of raw materials while ensuring a uniform texture. Its adaptability makes it particularly suitable for food processing plants that require both reliability and consistent performance. With its robust construction, the Carnitech C400 Grinder delivers stable operation even during intensive, continuous use. It maintains a steady throughput without fluctuations in quality, simplifying production management. As a result, operators benefit from a machine capable of reducing waste and improving the uniformity of finished products. The C400 can also be seamlessly integrated into existing processing lines, whether upstream or downstream of other equipment. Furthermore, this machine stands out for its ability to process a variety of products while maintaining consistent performance. Its design also promotes easy maintenance, minimizing downtime and maximizing overall equipment availability. As a refurbished pre-owned unit, the C400 represents a cost-effective solution without compromising industrial-grade efficiency. Ultimately, the Carnitech C400 Grinder supports optimized production workflows, enhancing productivity while ensuring consistently high product quality, making it a strategic asset for demanding industrial operators. Technical specifications: Power: 110 kW Grinder for frozen meat Dimensions: 3000 mm x 1550 mm x 2660 mm (L x W x H) Ncsdpfxeyw R Elj Amnst Screw diameter: 400 mm

Condition: ready for operation (used), functionality: fully functional, The Seydelmann MU200 B Grinder is engineered to meet the high demands of industrial food processing for both grinding and mixing applications. Once integrated into a production line, it ensures homogeneous processing of raw materials while maintaining consistent quality in the final product. It is perfectly suited for plants handling fresh, frozen, or cooked meats as well as other food preparations. Thanks to its combined grinding and mixing system, the Seydelmann MU200 B significantly improves texture consistency. The product is first mixed uniformly before being ground, optimizing ingredient distribution and minimizing quality deviations. As a result, manufacturers benefit from a more stable end product, reduced waste, and fewer rework cycles. Additionally, this configuration supports continuous flow production, which helps manage high throughput rates effectively. Nsdpfxoyw Rxrs Amnect This machine is distinguished by its robust construction and design intended for intensive industrial use. The integration of all components in a closed stainless steel frame guarantees a high level of hygiene and simplifies cleaning. Its safety-oriented design minimizes the need for operational interventions, thereby enhancing operator safety. As a refurbished pre-owned machine, it offers an excellent compromise between industrial performance and cost control. In summary, the Seydelmann MU200 B Grinder embodies an approach focused on optimized production, where precision, reliability, and operational continuity are essential. It increases productivity while ensuring consistent quality, making it a strategic asset for food processing lines. Technical specifications: Model: MU 200 B Year: 2006 Power supply: 400 V Frequency: 50 Hz Motor power: 25 / 37 kW Plate diameter: 200 mm Output: up to 6,000 kg/h Hopper capacity: 300 L Mixing capacity: 150 kg Weight: 1,000 kg

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Thüringa continuous cutter Workshop overhauled Model: VC 114 Year of manufacture: 2000 Nsdpfx Amey Eg I Ejnect 1x cutting set Shipping possible

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, MAJA Belt Skinning and Membrane Removal Machine Model: Vario II Fully functional Year of manufacture: 2005 Nodpfsy Eg Ewex Amnjct Shipping possible