Used Motor-Driven 4-Roll Plate Bending Machine for sale (110,209)

Condition: excellent (used), Year of construction: 2000, control type: NC control, actuation type: hydraulic, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), 4 roll plate bender Davi Promau - MCB 3037 MACH-ID 9613 Gsdpszcnuyefx Ai Nsiu Make: Davi Promau Type: MCB 3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Gedpjzbqqujfx Ai Njiu Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø Gedpfx Aiskvm S Ns Neiu 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gisdpfokvm Szex Ai Neu

Condition: excellent (used), Year of construction: 2004, control type: CNC control, controller model: Siemens, number of rollers: 4, roller (top) diameter: 12 mm, side roll diameter: 14 mm, working width: 3,100 mm, sheet thickness (max.): 14 mm, overall weight: 12,000 kg, total length: 5,000 mm, total width: 1,900 mm, total height: 3,900 mm, 4 roll plate bender HAEUSLER - VRM-HY 3000 x 14 MACH-ID 9611 Make: HAEUSLER Type: VRM-HY 3000 x 14 Control: Siemens Rolling width: 3100mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 10mm Number of rolls: 4 Rolling speed: 0-5 Top support: yes Length: 5000mm Width: 1900mm Height: 3900mm Giodpjy H A Uqefx Ai Nsu Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Godpfxey Expue Ai Neiu

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Giedjkwcc Njpfx Ai Nou Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: good (used), functionality: fully functional, Year of construction: 2016, Four-roll hydraulic CNC sheet metal bending machine. The machine is designed for bending sheet metal and manufacturing cylindrical or conical parts. Thanks to its four-roll design, it enables precise pre-bending and bending in a single working cycle. Suitable for mechanical engineering production, steel structures, tanks, pipe components, and other heavy-duty sheet metal applications. Technical specifications: Manufacturer: Durma / Durmazlar Model: HRB-4 2535 Year of manufacture: 2016 Type: Four-roll hydraulic sheet metal bending machine with CNC control Max. sheet thickness: 35 mm Working width: approx. 2,560 mm Machine length: 5,010 mm Machine width: 2,060 mm Machine height: 2,050 mm Machine weight: 20,300 kg Motor power: 37.4 kW Voltage: 400 V / 50 Hz Serial number: 683316002 Equipment and accessories: CNC control Hydraulic roll adjustment Side support Gisdpoy Sz Ersfx Ai Nsu Top support Feeding table / supporting roller guide Documentation / operating manual The machine is connected and can be tested by arrangement.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 25498, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 260 mm, working width: 2,070 mm, sheet thickness (max.): 25 mm, TECHNICAL DETAILS Sheet width: 2,070 mm Sheet thickness: 25 mm Bending capacity: 18 mm Top roller diameter: 320 mm Side roller diameter: 260 mm Lower roller diameter: 320 mm MACHINE DETAILS Total power supply: 26 kW Dimensions & Weight Space requirement: approx. 4,700 x 2,000 x 2,200 mm Machine weight: approx. 8,100 kg EQUIPMENT Hydraulic lateral roller adjustment Conical bending device 2 driven rollers Hardened rollers Hydraulic drop-end bearing Mobile control panel Foot switch Safety device CE marking Gedoygw Ikspfx Ai Noiu

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Gsdsw Slctjpfx Ai Nsiu Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11/10575, working width: 3,000 mm, sheet thickness (max.): 16 mm, TECHNICAL DETAILS Sheet metal width: 3,000 mm Sheet metal thickness: 16 mm Gjdpfx Aiozapqwj Noiu Control system: conventional MACHINE DETAILS Rated current: 63 A Voltage: 380 V

Condition: good (used), functionality: fully functional, Year of construction: 2012, MG SRL MH 316 C 4 Roll Plate Rolling Machine- Year 2012. Gsdszc Rkwopfx Ai Nsiu 4-roll plate bending machine. 3000 mm up to 16 mm. Upper roll diameter 340 mm. Lower and lateral rolls 310 mm.

Condition: used, functionality: fully functional, Year of construction: 2013, MG SRL AR 140 Profile Bending Ring Rollers- Year 2013. Specifications Shaft Ø140 mm Number of rolls 3 Resistance moment 130 CM³ Capacity flat 220 x 50 x R=2000 mm Horizontal and vertical Yes, Horizontal + Vertical . Stroke X-Axis 400 mm Capacity Tube 180 x 4 x R=4000 Ø x mm Capacity bar 80 x 80 x R=1000 mm Capacity HEA-Profile 180 x R=1800 mm. Dimensions Length 2100 mm Width 1900 mm Height 2100 mm Weight 6500 kg Gedpfxszc N Rcj Ai Neiu

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gisdpfx Aoxdigfei Nou Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, control type: NC control, controller manufacturer: Siemens, controller model: S7, working width: 3,000 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge: 1,000 mm, overall weight: 9,000 kg, total length: 2,700 mm, total width: 4,300 mm, total height: 2,000 mm, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Motorized Swivel Bending Machine Manufacturer: HERA, Type: SM4-3000x6mm Year of Manufacture: 1998 Giodjzcykmepfx Ai Nju Technical Data Manufacturer: HERA Type: SM 4 Year of Manufacture: 1998 Capacity: 3020 x 6 mm Upper die opening: 450 mm! Lower die adjustment: 80 mm Working height: 900 mm Motor power, upper die drive: 5.5 kW Motor power, bending die drive: 11 kW Dimensions: approx. L 4.3 x W 2.7 x H 2.0 m Weight: approx. 9 t Equipment • Motorized bending die adjustment for sheet thickness setting • Hydraulic upper tool clamping! • Bending dies: 12 mm, 20 mm, 40 mm • Shear dies: 1 piece continuous shear die 30° 1 piece segmented shear die 30° (installed in the photos) 1 piece segmented shear die 45° • Goose-foot tool, approx. 240 mm high, segmented • CNC-controlled back gauge, 1000 mm • CNC control Siemens S7 All information is subject to change without notice. An inspection while the machine is running is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2022, sheet width 2050 mm plate thickness 4.5 mm ST pre-bending capacity 4.0 mm ST roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Current new price: approx. 13.000 Euro good condition (!!) Special price upon request Features: - Robust electromechanical plate rolling machine - 2 centrally driven rollers (top and bottom rollers) powered by an electric motor - Manually swiveling top roller with hinged bearing - Includes conical bending device - Freestanding control panel - Manually adjustable bottom roller (via handwheel) - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety line with switch unit) Godpsy Umc Iefx Ai Njiu - CE marking / Declaration of Conformity Special equipment included in the price: - Hardened rollers - Motorized adjustment of side rollers - Digital position display for the motorized side roller

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop Gedpfxoxn Rrqe Ai Njiu - Documentation - 400V

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Giedpfjihvtgjx Ai Nou

Condition: new, The KRM ST 20/6, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, including steel and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and an asymmetrical roll arrangement, the KRM ST 20/6 can handle even the heaviest plates with precision. The crowned and hardened rollers are suitable for processing stainless steel, while the machine boasts a motorized drive powered by a 4 kW electric motor. Control is simplified with a foot switch, and the emergency stop safety rope ensures safe operation. You can trust the central lubrication system for reliable maintenance and operation. For those looking for quality Plate Rolling Machines, the KRM ST 20/6 stands out as a solid investment. Request a quote today to enhance your sheet metal processing capabilities with this exceptional 3-Roll Motor Plate Roller. Giedjqagtispfx Ai Neu

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm Giedpfx Ajv Tpxqoi Nju -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Height:2200mm Gsdpfx Aisycu E Es Noiu Weight:2900kg

Condition: ready for operation (used), functionality: fully functional, For sale: Davi 4-roll bending machine including table and extensive accessories. Model MCB ZA-45. Gedpfx Aozbd N Dsi Njiu For conical and cylindrical bending. New price was approximately €7 million. Year of manufacture: 2022.

Condition: ready for operation (used), Roll bending machine FASTI - Type 2040x2mm Gisdpfx Ajzb Emdei Nou - GS certification - Roller diameter 105mm - Max. sheet thickness over the entire length 2mm - Foot switch - Safety device Dimensions: L x W x H 3 x 1.1 x 1.4 meters / Weight: 1500 kg Errors and omissions excepted.

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Motorised blade roller 3 rolls Material width 1550 mm Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min Gisdpfst Hmlqox Ai Nju

Condition: used, Year of construction: 2016, total length: 4,400 mm, total width: 1,450 mm, total height: 1,300 mm, Empty weight: 5.200 kg Price: On request - Year: 2016 - Documentation available: Yes - └ Type Documentation: Electrical diagrams, Technical data, Operating system, User manual - CE marking present: Yes - CE certificate present: No Giedpfxeyn Aanj Ai Nou - Serial number: 210384 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 7.5 - Max. sheet thickness [mm]: 6 - Max. prebending thickness [mm]: 4 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 210 - Bottom roll diameter [mm]: 210 - Options: Cone rolling, Digital readout - Transport dimensions: 4400mm x 1450mm x 1300mm (l x w x h) - Transport weight [kg]: 5200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum