Used Mobile Force Shaper for sale (11,691)

Condition: excellent (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, overall weight: 26,000 kg, Used Omega J1065S Semi Mobile Jaw Crushing Plant Year 2021 900 Hrs 1000 x 650 Jaw Box (Same as the Extec C10 / Sandvik 241 Box) Complete Plant Consisting Of Grizzly Feeder, Jaw Box, Overband Magnet, Discharge Conveyor, Walkways Approx Weight 26 Tonne Dkodpfx Aoy Tyt Roqven Comes With Control Panel & Generator Excellent Condition Throughout

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Dkodpfx Aszbxyqeqvjn Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, For sale is a partially refurbished Presona baling press, with 50 t pressing force, 22 kW drive power, built in 2005 Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced Dksdpfjzbxxajx Aqvsn All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Dkedozbxwijpfx Aqvsn Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: Djdpfx Aqjzbxvlevskn The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2022, operating hours: 710 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min Dkodpfjvrz Rvox Aqvon - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation

Condition: used, Year of construction: 2021, operating hours: 5,000 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm meets EUROMOT V emissions standard Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW – VARIO - Load sensing system Fuel tank 950 liters Longitudinal belt: belt length 4,450 mm, belt width 1,000 mm Dedpfx Aqjvnmldovjkn Centrally arranged lubrication strips 24 V electric control Additional electric pump for operating the following functions when the engine is not running. Raise/lower/fold rear belt, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding funnel Radio remote control complete Large side GRP maintenance doors Maintenance-friendly engine compartment with LED light Hydraulically reversible fan wheel Loading protection on both sides Fire extinguisher Maintenance ladder Tool box Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Special equipment: 500 mm chain chassis unit Chain chassis 500 mm flat Crushing system size "L" -VARIOMAT Size "L" - "Limiter" (20 pieces) Rear conveyor length 7 m 1200 mm wide LED light package engine compartment and rear Irrigation with funnel attachment H=300mm Frame for overband magnet Overband magnet 2 t permanent

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Djdjwnfwqepfx Aqvekn Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Dodpfsxx Tigex Aqvskn Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2022, operating hours: 3,250 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Dodpfjxx N T Isx Aqvskn Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 4,561 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Djdpfjyhckmjx Aqvskn Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips Dksdpfx Ajxx N Dgjqvsn - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Year of construction: 2017, operating hours: 6,100 h, condition: excellent (used), functionality: fully functional, Year 2017 Dedpfxsxz R Tne Aqvokn 6100 Hrs 1 Owner JCB Engine Fitted With 0-20 / 40mm Deck Extremely Well Looked After Unit

Condition: good (used), Year of construction: 2014, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, small dust collectors -Manufacturer: TEKA, mobile welding fume extraction system type Strongmaster IFA -Drive: 1.1 kW -Volume flow rate: 3000 m³/h -Extraction arm: Ø 160 mm x 4000 mm Dkodpfx Aqozblywsvsn -Transport dimensions: 950/670/H1365 mm -Weight: 196 kg

Condition: used, Year of construction: 2018, operating hours: 3,297 h, functionality: limited functionality, Features of the basic unit: Infeed conveyor: •Highly wear-resistant, forged special chain Dksdpsza S Hnefx Aqvon •Infeed conveyor width: 1,700 mm •Infeed conveyor length: 4,700 mm Hydraulic system: •Infeed roller and infeed conveyor each with a separate drive and gearbox. The speeds of the infeed conveyor and the infeed roller are continuously adjustable. Overload protection through speed monitoring and reversing mechanism. Hydraulic tank with a capacity of 220 liters. Infeed: •The infeed roller is hydraulically driven, pendulum-mounted, and guided by 2 rack and pinion systems. •The infeed opening is approximately 660 mm high and 1,700 mm wide. Hammer mill: •46 hammers, hammer width: 80 mm •Hammer tips can be individually replaced •Hammer mill width: 1,700 mm •Rotor diameter: 999 mm •Rotor speed: 1,000 rpm Motor: •SCANIA turbo diesel with a power output of P = 478 kW, compliant with current Euro emission standards Drive: •Direct drive via 8 V-belts Hopper dimensions: •Hopper opening length: 4,800 mm •Hopper opening width: 2,400 mm Throughput capacity: •200-300 m³/h and more, depending on the material Delivery date will be agreed upon.

Year of construction: 2004, condition: good (used), Atlas Copco XAS 67 compressor 3.7 m3/min Number of hours: 2,371 h Deutz engine Type: diesel Djdpeiywpzjfx Aqvskn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, lifting height: 1,000 mm, lifting power: 200 kg/m, fuel type: electric, Equipment: UVV, Transport and trade-in possible by arrangement. Dkjdpfsytn Etex Aqvon

Condition: used, Year of construction: 2021, OFFERS CONSIDERED PRIOR TO AUCTION 1200mm Stainless Steel Mobile Rotary Collecting Table 240 Volt with 380mm Mobile Conveyor, 240 Volt. Factory No. 21-204C (07/2021) Dksdpfxjy Rzpze Aqvjn Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: new, new all stainless steel discharging height ± 1.770 – 2.250 mm chain break system 400V – 50 Hz Dsdsy Sz H Njpfx Aqvskn Motor 1.1 kw mobile

Year of construction: 2026, condition: new, The KVK 600 is ideal if you are looking for a mobile solution to stretch-wrap your packaged goods. Or if you have packaged goods that are too large or too heavy for a pallet wrapper with a turntable. With its electric steering, the KVK 600 can be easily moved to any corner of your warehouse. Its rechargeable battery is designed for 8 hours of continuous operation. The KVK 600 has a power stretch system with up to 300% stretch. This significantly reduces your film consumption, as 1 meter on the roll becomes 4 meters on the pallet. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods can be wrapped easily. Up to 10 individual programs can also be saved for the KVK 600, in which you can specify for each step (foot wrapping, ascending wrapping, head wrapping and descending wrapping) how quickly and with what film tension they should be carried out. This allows you to store individual programs for each wrapping scheme in order to achieve ever more perfect wrapping results. The programs can be password-protected so that the user can only select from the stored programs. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. In addition to a photocell for the detection of dark packing goods or black film, a higher mast and a set of exchangeable battery and external charger are also available for the KVK 600. Dsdpfxszaacqe Aqvokn This model is our recommendation if you want to use your stretch wrapper on the move, or if you have pallets with excessive dimensions and value absolutely consistent results. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 8.2 kW (11.15 HP), suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, For sale: Felder RL 300 industrial dust extraction system in very good condition. Dsdpfx Aozap Ezoqvekn The machine was delivered new in 2022 and has always been located in a well-maintained interior design workshop. The system functions perfectly and can be used immediately in a furniture workshop, carpentry shop, or interior design workshop. Specifications: Brand: Felder Type: RL 300 Year of manufacture: 2022 Condition: fully functional Design: industrial dust extraction system with filter system Mobile on wheels The machine is sold without extraction ducts and pipes. Only the base unit as shown in the photo. Suitable for connecting to multiple woodworking machines such as: CNC machine panel saw edge banding machine planers milling machines The machine can be viewed in Rijnsburg – by appointment only. Transport is the responsibility of and arranged by the buyer. Available from mid-July. Asking price: €10,250 excluding VAT

Condition: used, functionality: unexamined, Year of construction: 2023, Bocker AK46/6000 / Man TGM 26.3 Truck Cranes 2 available 2021 & 2023 Maximum capacity 6 tonnes, 44m boom length  Dedpey Ndttsfx Aqvekn Please note library photo shown. Current photos of the actual cranes to follow. Further information and usage/mileage to follow Early registration of interest is strongly recommended

Condition: ready for operation (used), Sasse Elektronik 1360.9916005 PHMI mobile HMI, used, normal signs of use, 100% functional Djdpfx Asi Ec E Soqvjkn

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 18,073 h, I HAVE LIEBHERR A 316 LI GOOD CONDITION WE HAVE USED LAST 7 YEARS EVERY 1HOURS SERVICED REGULARY GOOD MACHINE NO ANY ISSUES Djdpfx Aqexfq R Uevokn

Condition: good (used), mileage: 118,000 km, fuel type: diesel, color: blue, mast type: telescopic, Year of construction: 2013, operating hours: 13,800 h, Details - Manufacturer: Grove - Type: GMK 4080-1 mobile crane - Chassis number: W09080430DWG12042 - Year: 2013 Specifications - Engine: Mercedes-Benz - Kilometers: approx. 118,000 km - Undercarriage hours: approx. 4,100 h - Superstructure hours: approx. 13,800 h - Max. lifting capacity: 80,000 kg - Max. operating pressure: 300 bar - Main boom / 5 sections: 51 m - Hydraulic jib: 21 m - Drive: 8 x 8 x 8 - Tires: 445-95 R 25 - Tare weight: 48,000 kg Dodpfx Aqex Tp Svevekn Accessories: - 1 x 1-sheave hook - 1 x 3-sheave hook = Further information = Year of manufacture: 2013 Tare weight: 48,000 kg Boom length: 51 m Lifting capacity: 80,000 kg Superstructure manufacturer: Grove GMK CE marking: yes Technical condition: good Optical condition: good Price: On request