Used Mobile Flame Cutting Machine for sale (71,077)

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission4, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) Itedpfxsz Inavo Akpon F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: good (used), functionality: fully functional, total height: 2,350 mm, total width: 1,200 mm, total length: 2,750 mm, overall weight: 3,500 kg, workpiece weight (max.): 1,000 kg, Workpiece diameter: ø25 - 630 mm (min-max) Iodpfoz H Nzfjx Akpjtn Torch stroke: 1500 mm Chuck through-hole: ø200 mm Cutting speed: 2000 mm/min Max. workpiece weight: 1000 kg PLC Controller: Siemens C7-633 Cutting process: Plasma cutting or oxy-fuel cutting Country of origin: Germany Machine (L×W×H): 275 x 120 x 235 cm Machine weight: ca. 3500 kg

Condition: good (used), Year of construction: 1985, functionality: fully functional, cutting width (max.): 920 mm, insertion depth: 920 mm, insertion height: 110 mm, cutting length (max.): 920 mm, stack height: 110 mm, overall weight: 1,820 kg, front table length: 430 mm, total width: 2,120 mm, total height: 1,470 mm, working width: 920 mm, total length: 2,120 mm, cutting height (max.): 110 mm, Equipment: CE marking, safety light barrier, Polar Mohr EMC 92 – Hydraulic Paper Guillotine Polar Mohr EMC 92 programmable hydraulic paper cutting machine, in good condition and ready for continued professional use. The machine has been well maintained and carefully operated and is in good working condition. The Polar EMC 92 is a robust and reliable paper guillotine, suitable for commercial printing and finishing applications. Machine Highlights Manufacturer: Polar Mohr Model: EMC 92 Machine type: Hydraulic paper guillotine Cutting width: approx. 920 mm Hydraulic clamp Programmable digital control Air table Optical cutting line Ijdez Hvlqjpfx Akpstn Safety light barriers Side tables Good overall condition Well maintained Reliable and robust construction Ready for continued professional production Inspection possible by appointment The Polar Mohr EMC 92 offers precise and efficient cutting and is a proven solution for professional print shops, bindery and finishing operations. Further technical specifications, photographs and additional information are available upon request.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 15,794 h, machine/vehicle number: A3231E0676, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser hours: 5,111 h, laser power: 12,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 280 m/min, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2024) High-spec 2D fiber laser cutting machine, one owner from new, installed September 2024. 3000 x 1500 mm working area, Siemens Sinumerik 840D SL control. In daily production and under TRUMPF service contract from new. Key data Machine No.: A3231E0676 Year of manufacture: 09/2024 Laser source: TruDisk 12001 with smart beam control Laser power: 12,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 50 mm / stainless 50 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight (rating plate): 7,650 kg Supply: 400 V 3~ / 50 Hz, 74.0 kVA, 3 x 125 A Hours: 15,794 h operating / 5,111 h laser-on Gas mixing Onboard gas mixer fitted - hardware mixing system for two gases, with additional cutting gas connection and gas mix cutting data (N2/O2). No external mixer unit needed. Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (left). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle changer, cleaning and centring. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Transport and installation device supplied. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK control, 21.5" wide-screen multi-touch display. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation, Smart Rerun. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package. Pallet changer / automation Automatic pallet changer in longitudinal direction, max. workpiece weight 1,800 kg per pallet (2,200 kg across both). LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Iodpozz Shysfx Akpstn Data transfer USB, RJ45 network interface, Central Link, remote support, TRUMPF monitoring software connection. Installation Installed on a mezzanine; steel structure not included. Condition and availability One owner from new, in daily subcontract production in Braintree, Essex. Under TRUMPF inclusive service contract from new - two services a year, parts included - and still covered. Full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available. Enquiries Order confirmation, service history, hours report, cut samples and video on request.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 18 h, actuation type: electric, controller manufacturer: Trotec, laser type: CO₂ laser, laser source manufacturer: Trotec, laser hours: 10 h, laser power: 120 W, laser wavelength: 10,600 nm, working length: 1,016 mm, working width: 610 mm, working height: 305 mm, feed rate X-axis: 259 m/min, feed rate Y-axis: 259 m/min, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, type of cooling: air, warranty duration: 24 months, Equipment: CE marking, emergency stop, We are offering this virtually new Trotec Speedy 400 engraving and cutting machine with a factory warranty. It is located in a sufficiently dust-free environment with the correct temperature and humidity. Machine data as of October 1, 2026: - Total machine operating time: 18 hours and 8 minutes - Total laser source operating time: 9 hours and 21 minutes Itjdpfsz Il Auex Akpjn - Total registered travel distance: 241,066 meters Model: Speedy 400 Manufactured: March 2026 Country of origin: Austria Mains voltage: 230 V AC Frequency: 50/60 Hz Rated power: 2100 W Wiring diagram: 8086_Speedy400_wiring Laser type: CO₂ Laser power: 120 W Wavelength: 10.6 µm Pilot laser power: ≤0.99 mW Pilot laser wavelength: 655 nm New price: €76,040 If you have any questions or would like more information, please send a message or call. The pick-up date will be arranged in consultation. Two industrial fans for air extraction can also be included.

Condition: used, Year of construction: 2007, 2007 Amada LC3015 XI NT, Co2 Laser Cutting Machine with CNC Control with Stacker, Donaldson Torit DCE Dust Collector & Riedel Chiller Comprising: Amada LC3015 XI NT Laser Cutting Machine. 'X' Axis 3,100mm x 'Y' Axis 1,550mm x 'Z' Axis 120mm. Sheet Size 3,000mm x 1,500mm, Max 20mm Thick. Max Weight 730kg. 40CFX, 4,000 Watt Co2 Laser Resonator. Automatic Pallet Changer. BWS Transformer. Operating Terminal Beiyer E700 Stand Alone Control. Riedel Stand Alone PC 1001.1MS5.1 Chiller (2007). LKI, AS LUL 300XI Automated Compact Storage, Loading & Unloading Tower System (S/No. 1294) (2006). Sheet Size Max 3,000mm x 1,500mm, Minimum 2,000mm x 1,000mm, Thickness Max/Min 20mm/0.5mm. Mitsubishi Q Series PLC. (2) Sick MSLE03-24011 Beam Sensors. Donaldson Torit DCE Stand Alone Dust Extractor with Donaldson TCB Total Control Board. Weight of Laser Cutting Machine Approx 10,500kg. Dimensions Approx 6,500mm x 3,200mm x 2,100mm. Weight of Stacker Approx 11,000kg. Dimensions Approx 4,450mm x 2,700mm x 4,860mm High. Dimensions of Dust Extractor Approx 1,500mm x 1,400mm x 3,200mm High. Dimensions of Chiller Approx 2,860mm x 1,130mm x 2,000mm High. Power Supply 415 Volt, 3 Phase. Viewing Recommended. Please Note Technical Details of Stacker Shown within the Pictures. Isdpfxoz E R Ide Akpstn

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,000 h, Bystronic DNE1012FCCB – 500 Watt: a compact and reliable fiber laser cutting machine from Shenzhen DNE Laser (Bystronic Group). The machine is in very good technical condition, has few operating hours, and is ideal for the precise processing of smaller sheet metal formats. The system is available immediately and can be inspected and tested at any time after prior arrangement. Technical data: • Power: 500 W fiber laser Itjdez Akqcepfx Akpon • Table dimensions: 800 mm * 1,100 mm • Working area: 600 mm * 1,000 mm • including extraction system • approx. 4,000 operating hours • Year of manufacture: 2017 • Connection value: AC 380V / 50Hz

Condition: used, The REMS Magnum pipe threader is suitable for pipes from 1/4" to 2". The following threading dies are included: - 3x: R1/2 - 3/4 - 5x: R1 - 2 The unit has been function-tested and comes with an electrical inspection carried out by a professional electrical company. Itedpsz Nlfgofx Akpen

Condition: used, Empty weight: 12.500 kg Dimensions (LxBxH): 725 x 287 x 178 cm Serial number: 152040 Year of manufacture: 2000 Control system: Mazatrol L32B X-axis: 2685 mm Y-axis: 1270 mm Z-axis: 100 mm Iodpfjz R S Tbsx Akpotn Indexing table: yes Maximum workpiece dimensions: 2500 × 1250 × 25 mm Maximum load: 615 kg Nominal laser power: 4000 W Laser type: CO₂ – YB-L400A 8M Machine weight: 12,500 kg Includes Donaldson exhaust system Length: 7,250 mm Width: 2,875 mm Height: 1,780 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser type: CO₂ laser, laser power: 5,000 W, Equipment: cooling unit, nozzle changer, - Laser power: 5000 watts. - Year of manufacture: 2010 - Thin sheet productivity package - Nozzle changer - Transverse conveyor - Tilting container for transverse conveyor - LiftMaster Store - Extended sorting system (1000 x 600) - Extended part removal for parts from 600 x 600 - Integrated sheet alignment - Single-sheet separation - Sliding gate, two-leaf Isdszq S Edjpfx Akpjtn - SortMaster - Rotating unit + extended part removal 1000 x 600, infinitely adjustable - Additional gripper for long parts - Extended magnetic suction system - TruStore 1030 - Infeed/outfeed station with trolley - 10-level compartment, 90 mm + pallet - 5 pallet bases - Column cladding - Storage interface

Condition: new, STRUERS Metallographic Cutting Machine Struers Labotom-5 NEW / unused – Year of manufacture 2025 Complete system with base cabinet, recirculating cooling unit and accessories For sale is a new, unused metallographic cutting machine from the manufacturer Struers including base cabinet, recirculating cooling unit and accessories. The Struers Labotom-5 is suitable for manual sectioning of material samples for metallographic sample preparation in laboratories, industry and quality assurance. The system has not yet been assembled or put into operation and is in its stored, shipping condition. Technical data: Manufacturer: Struers Type: Labotom-5 Article number: Year of manufacture: 2025 Type of equipment: Metallographic cutting machine Operation / Feed: Manual Electrical data: Mains connection: 3 × 380–415 V / 50 Hz Motor power S3 60 %: 2.2 kW Motor power S3 15 %: 3.2 kW Rated current: 5.3 A Maximum current draw: 10.6 A Cutting wheel: Diameter: 250 mm Inner hole diameter: 32 mm Speed: 2,910 rpm at 50 Hz Cutting capacity according to manufacturer: Maximum diameter: 90 mm Height × Length: 42 × 120 mm Cutting length: 135 mm Cutting table: Width: 316 mm Depth: 225 mm T-slots: 10 mm Manual feed Dimensions and weight of the Labotom-5: Width main unit: 700 mm Width including handle and rinsing gun: 960 mm Depth: 760 mm Height with closed cover: 530 mm Height with open cover: 900 mm Equipment weight: 75 kg Recirculating cooling unit: Struers recirculating cooling unit System 3 Article number: Coolant tank: 50 liters Including related cooling components according to parts list and images Equipment: Closed cutting chamber with safety cover Manual cutting feed Cutting table with T-slots Rinsing gun Coolant supply Base cabinet / table Separate recirculating cooling unit with 50-liter tank Clamping tools and service kit according to scope of delivery Application areas: Metallography Material testing Sample preparation Quality assurance Iodpez Szddsfx Akpstn Research and development Industrial laboratory applications Scope of delivery: 1 × Struers Labotom-5 cutting machine – Art.-No. × Recirculating cooling unit System 3, 50-liter tank – Art.-No. × Base Plate 10 mm Left – Art.-No. × Base Plate 12 Left – Art.-No. × Table unit / Base cabinet – Art.-No. × Service kit Labotom-5 – Art.-No. 16042999 Further accessories, packaging and documents documented in the original photos, according to the illustrated delivery condition. Condition: NEW / unused Year of manufacture 2025 Not yet assembled or put into operation Main unit packed securely in a wooden crate for transport Base cabinet packed on a pallet and protected Further accessories packed separately No documented functional test The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The illustration of the fully assembled machine is an EXAMPLE. The original photos show the actual delivery condition. Scope of delivery according to description and original photos. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, In this offer you purchase a used cutting system "Fotoba FHS42 PW" Itjdsqmm D Sepfx Akpsn Object of sale: 1 x Fotoba FHS42 PW suitable for: HP Pagewide Pro XL 10000 HP Pagewide XL 8000 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: good (used), Paper cutting guillotine Perfecta 76 TVC Device in perfect condition, very low mileage. After general renovation in 2013. Technical data: Cutting width: 760 mm Stack height: 110 mm Weight: 1650 kg Power supply: 400 V Equipment: – programmer with touch screen – photocells – air table – cutting line – chrome table surface – enlarged side tables Itodpez Rki Hsfx Akpsn – hydraulic clamp with smooth force regulation – instructions – full set of tools – plate for clamp – tapping block – spare knife

Condition: ready for operation (used), machine will be checked & cleaned digital display 6-channel light guards two hand safety cutting back table guarding optical cutting line indication Iedpfx Ajz Izcqskpjtn air table slot cover at back table side tables (2) 3 Phase - V380 - A11.4 - HzCycl50 - KW4.3 Pack-Dims W220 x D250 x H175 cm / 1750kg

Condition: used, Year of construction: 2016, Bystronic BySprint Fiber 3015 + ByTrans 3015 Extended – Laser cutting machine with loading and unloading system Working area: 3000 x 1500 mm Laser power: 4000 W - ByTrans 3015 loading and unloading system - ByVision CNC control with touchscreen - Handheld control unit - Fiber 4000 laser source - Cutting parameter assistant - Automatic nozzle cleaning - Automatic nozzle changer with 40 positions - Operator protection in the cutting area and loading/unloading area - Extraction system - Extraction device for sheet separation - Compressed air connection - Operating hours approx. 76,000 Iodpoz Itl Dofx Akpotn - Cutting hours approx. 28,000 - Year of manufacture: 2016 Included packages: - Material specification package - Package for part tolerances & cutting edge quality - Package for cutting gas supply & cutting quality

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 30 h, control type: CNC control, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser hours: 30 h, laser power: 6,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,015 mm, travel distance Y-axis: 1,515 mm, travel distance Z-axis: 50 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, 🇳🇱 Verkooptekst voor uw BEKE 6 kW Fiber Lasersnijmachine (3000 × 1500, Reci‑kop) Bent u op zoek naar een krachtige, nauwkeurige en betaalbare lasersnijmachine voor metaalbewerking? Deze BEKE 6 kW fiber lasersnijmachine, uitgerust met een Reci‑laserkop en een efficiënt werkbereik van 3000 × 1500 mm, biedt uitstekende prestaties voor zowel dunne als dikke metalen platen. Echt 6000 watt vermogen voor het snijden van staal, RVS, aluminium, koper en messing Reci‑laserkop voor stabiele prestaties, hoge snijkwaliteit en lage onderhoudskosten Compact werkbereik van 3000 × 1500 mm, ideaal voor standaard platen en efficiënte productie Strakke snijranden zonder nabewerking Hoge productiesnelheid, perfect voor seriewerk en industriële toepassingen Betrouwbare onderdelen: Reci‑kop, Fuji servo’s, HIWIN geleiders Gebruiksvriendelijke CNC‑besturing met hoge nauwkeurigheid Lage energieconsumptie vergeleken met CO₂‑lasers ⚙️ Technische specificaties Isdpfezyv Sysx Akpstn Werkbereik: 3000 × 1500 mm Vermogen: 6000 W fiber laser Positioneringsnauwkeurigheid: ±0,03 mm Herhaalnauwkeurigheid: ±0,02 mm Snijsnelheid: tot 40 m/min Snijdikte: tot 20 mm, afhankelijk van materiaal Koelsysteem: industrieel waterkoelsysteem

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Iodpsz Rki Tefx Akpotn Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: good (used), Year of construction: 2014, functionality: fully functional, ▪ Core diam.outside: 70 – 174.6mm ▪ Core diam.inside: 60 - 150.7mm ▪ Core length (input): max 4780mm ▪ Cutting length: 100 – 3000mm Iedpfx Ajy N Stuekpetn ▪ Design capacity: 300 cuts/h Complete core cutting installation, including loading rack, hopper table, core rack, core robot, chute, feeder, core cutter, lift table, transport trolleys and dust collection unit.

Condition: good (used), functionality: fully functional, Year of construction: 2019, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 350 mm, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, For sale is a used Bodor P3 fiber laser cutting machine, manufactured in 2019. The machine is in good used condition and is ideal for professional use in metal and sheet metal processing. Bodor P3 fiber laser cutting machine – manufactured in 2019 – used Bodor P3 3D? / fiber laser cutting system – manufactured in 2019 Technical data: * Model: Bodor P3 Itjdpfxjz Egzgo Akpjn * Year of manufacture: 2019 * Working area: 3,048 × 1,524 mm * Max. travel speed: 200 m/min * Max. acceleration: 4.0 G * Z-axis travel: 350 mm * Positioning accuracy: ±0.05 mm/m * Accuracy of repositioning: ±0.02 mm * Dimensions: approx. 9,450 × 2,240 × 2,520 mm * Table loading station: 3–60 kW, depending on the model The Bodor P3 impresses with its high cutting speed, precise positioning and a generous working area. An interesting machine for sheet metal processing, metalworking, job production and industrial manufacturing. Used machine – inspection possible by appointment. Transport, dismantling and loading can be organized upon request. Dismantling, transport and loading can be organized throughout Europe for an additional charge, if desired. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, LVD PUMA LASER Model 3015 Fibre Cutting Machine, Year of Manufacture 2024. Itodpfxjzwgg Ne Akpon Model MFMC-12000 , Laser Power 12 KW.

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: NS-HG Type: Heavy pipe machine Beveling function: Optional Power range: Round pipe processing: 50mm~560mm Square pipe processing 50mm~560mm Chuck maximum 30r/min Itjdpfx Akoww Upzspon Machine weight: 29t Power specification: 380VAC, 50Hz Optional loading rack: Three-chuck chain automatic loading rack Optional unloading rack: Three-chuck chain automatic unloading rack Standard: System 5000A, including nesting, supports servo (beveling) Zero tail material rear card hollow dust removal Optional: Weld detection, safety fence (light curtain), radiation-proof glass

Condition: used, Used Urschel cutting machine, built entirely in stainless steel This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine. Iedpfxez Ndk He Akpstn The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Cutting machine Infeed: Hopper Drive: Electric motor with belt drive Controls: Own control box on the machine Construction: Stainless steel, on castors

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. Iedpfey Urzijx Akpstn The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, sheet thickness aluminum (max.): 80 mm, cutting height (max.): 200 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, type of cooling: water, Equipment: documentation/manual, double-sided, MicroStep MasterCut 6001.20PG – 6,000 × 2,000 mm – Plasma + Oxyfuel Iodpfx Aez Hcr Dokpetn For sale is a MicroStep MasterCut 6001.20PG CNC plasma/oxyfuel cutting system with a working area of 6,000 × 2,000 mm, manufactured in 2025. Equipped with a Kjellberg SmartFocus 300 fine plasma power source and an additional fully automatic oxyfuel cutting system. The system is designed for processing steel, stainless steel, and aluminum. Key technical specifications: - Working area: 6,000 × 2,000 mm - Plasma: up to 80 mm - Oxyfuel: up to 200 mm - Kjellberg SmartFocus 300 Amperes - Fully automatic plasma support - Fully automatic oxyfuel support - Automatic gas consoles - Elevated gantry design - Smart Z movement - Active collision protection - MicroStep control with 24" touchscreen - Asper Basic 2D CAD/CAM - RemoteDiagnostics Included with the system is a Donaldson DFPRE 4-R filter/extraction system with 9.0 kW. The extraction system is explosion-proof and equipped with appropriate ATEX features, making the system suitable for cutting aluminum. The machine has been used very little and is in good condition. Inspection and demonstration under power are possible by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Itodpfx Akjyyygkepsn Voltage: 400 V Frequency: 50 Hz Power: 3,200 W