Used Metal Technics Polska Mtp3212 80X2500 for sale (64,064)

Condition: new, Year of construction: 2026, container length: 12 ft, overall weight: 5 kg, Equipment: air conditioning, bathroom, hot water, lighting, shower, Nowy, ocieplany, wykonany z płytwarstwowych w gatunku I pawilon o wymiarach zewnętrznych 12.00m x 4.0 Wymiary zewnętrzne ścian: 12x4m. (dach wysunięty po 10 cm z każdej strony)Wysokość wewnętrzna: 2.4 ze spadkiem do 2.3 m.Wysokość zewnętrzna: 240/230 cm m. 1. Podłoga - płyta poliuretan o gr. 100mm i przenikalnościtermicznej 0,22W/m2K, Pedpfx Aofu Sw Hed Sogr dodatkowo płyta OSB + wykładzina PVC 2. Ściany - płyta styropianowa gr. 80mm i przenikalności termicznej 0,27W/m2K , RAL 7016 3. Dach - płyta poliuretan gr. 100mm i przenikalności termicznej 0,22W/m2K; 4. Obróbka zewnętrzna i wewnętrzna kolor RAL 7016 5. Szyba , wymiar 980 x 2000 – 2 szt. 6. Drzwi wejściowe aluminiowe przeszklone - 1szt.; 7.PODSTAWOWA ELEKTRYKA 8. Element ozdobny w kolorze DO WYBORU 9.Mozliwosc ustawienia okien i dzwi w innym położeniu innym miejscu pawilonu. Czas realizacji do 1-2 tygodni od momentu wpłaty zaliczki 30%.

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. Pgsdpfsyq Rkyex Ad Ser The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call. Podpfxezdiz Nj Ad Sogr

Year of construction: 2012, condition: like new (used), Used 3 fans cooling evaporator DELTA TECHNICS model DKP61 The DKP series is specifically designed for room cooling [e.g. cold kitchens and processing areas] and is applicable to the most common refrigerants. Default the DKP models are equipped with a fin spacing of 3.2 mm; - Turbulated aluminium slats. - Copper pipes 1/2'' ; cuproclima. - Displaced geometry. - Aluminum housing, painted white. - Removable side panels. - Fans are pre-wired and connected in a central junction box - Blowing air direction. Used DKP61, Kw: 2,2 ; refrigerant: freon; number of fans: 3 x fans; electric; Sizes: (LxWxH); Remarks |: 1000 m3/h, / 1350 RPM / Ø = 300 mm (fan diameter); Price Euro 1.000 Euro + VAT, FCA: Oradea/Romania Pgodpfxsg Ugcwe Ad Sjr Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm Podpfxjxdmgvo Ad Sjgr CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13.707, working width: 6,200 mm, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), overall weight: 17,500 kg, throat depth: 60 mm, TECHNICAL DETAILS Psdpfx Aezuwzrsd Segr Max. sheet thickness: 6 mm Max. working width: 6,200 mm Overhang: 60 mm Back gauge type: Electric Back gauge depth: 1,000 mm Angle adjustment: Motorized Sheet support system: Pneumatic MACHINE DETAILS Power: 11 kW Drive type: Hydraulic Control: Conventional Control system: Elgo Dimensions & Weight Overall length: 6,400 mm Shipping weight: 17,500 kg EQUIPMENT CE certificate Documentation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 6.088.177.254, controller model: Durma DT-7, working width: 3,100 mm, sheet thickness (max.): 13 mm, overall weight: 11,800 kg, TECHNICAL DETAILS Max. sheet thickness: 13 mm Max. working width: 3,100 mm Pjdpfx Adjzuwvvo Ssgr Overhang: 50 mm Design: Swing-beam Angle adjustment: Manual Shear gap adjustment: Motorized Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS GENERAL Control system: CNC Controller: Durma DT-7 Drive type: Hydraulic Power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,350 x 2,350 mm Weight: 11,800 kg Transport packages: 1 unit EQUIPMENT CE marking Finger guard: Fixed with fold-up guard Table type: Ball-bearing table

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Pgodpfx Adszv Rc Ss Sor Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: used, Reportedly unused SGL Carbon type ECH-EC3-07B-1P/P carbon block heat exchanger. Approximate heat transfer area of 10.2sqmt. Space 1 rated 2 bar maximum allowable pressure at 170 deg.c. Space 2 rated 5 bar maximum allowable pressure at 130 deg.c. Pgedpfezfifwox Ad Ssr

Condition: like new (used), Fortress Stealth metal detector with star flex checkwigher. Aperture 400 x 110mm. fully rebuilt. Twin push arm rejects into lockable bins. Video on request. very tidy machine. Psdpfx Adex Syn Ee Sjgr

Condition: ready for operation (used), A spare front panel display for a Boekels Discovery C metal Detector - tested and working Pgodpfx Adszpy E No Ssr

Condition: used, Year of construction: 2001, functionality: fully functional, We have a Huvema HU 1010 A metal lathe available. It was manufactured in 2001 but has hardly been used, so everything is complete and in perfect working order. All documentation is still included! Pgodpfx Aszwmdhod Ssr The dimensions are: 1800 mm long, 800 mm wide, and 1300 mm high.

Year of construction: 2025, condition: new, functionality: fully functional, Description This is a brand new Ceia THS21ET/3F, manufactured in 2025, it includes a standard manufacturers 12-month warranty. It comes with Three frequency technology which means that the machine will automatically select a suitable frequency for the product. This means far more flexibility of types of products that this detector can run, compared to traditional metal detectors This machine will be ready to view at the end of September, and will be available immediately from that point to Buy or Rent. Technical Specification Aperture dimensions 550 wide x 350 high Belt stop & alarm reject system Podsum I Slepfx Ad Ssgr Modular belting Variable speed Currently runs right to left but can easily be changed to left to right. Protected reset system

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 x Loma Systems IQ2F / IQ3 twin-head metal detector with alarm and belt stop on detect reject system, mounted on a height-adjustable frame. Manufacturer - Loma Systems Date of manufacture - 2010. Pgjdpfey Hinksx Ad Ssr Serial number IQ3 standard head - MD301-12429D. Aperture dimensions: IQ2F Ferrous-in-foil head - 370mm wide x 135mm high (105mm useable) / IQ3 standard head - 350mm wide x 150mm high (115mm useable). IQ3 standard head frequency - Variable. Handing - Left to Right. Belt type - rubber. Belt dimensions - 2600mm long x 300mm wide.

Condition: excellent (used), Concept Laser X Line 2000R BC2 Dual Laser Manufacturer: Concept Laser GmbH / GE Additive / Colibrium Additive Type: X Line 2000R BC2 Year of manufacture: 2015 Machine type: Metal 3D printing system Process: LaserCUSING® / Powder bed process Laser system: Dual Laser Material processed: AlSi10Mg For sale is an industrial metal 3D printing system from Concept Laser. The system was designed for the additive manufacturing of metallic components using the powder bed process and is suitable for research, development, prototype construction, and industrial series production. BC2 upgrade / modernization The system has been upgraded to the newer BC2 system level. According to the available documentation, a comprehensive retrofit was carried out with the replacement of numerous assemblies and components. As a result, the machine has a significantly modernized equipment and system level compared to earlier X Line 2000R models. Technical data Power connection: 3P/N/PE AC 400 V ±10 % Frequency: 50 / 60 Hz Max. current consumption: 17 A per phase Compressed air supply: 7 - 8 bar Inert gas supply: 5 bar Cooling: water-cooled system Machine dimensions approx.: 5,300 x 2,700 x 2,760 mm (L x W x H) Weight approx.: 13,400 kg Equipment Dual laser system Powder handling system Material feed system Filter units Process gas supply Control cabinet technology Operating and control system Work platform with access ladder Water-cooled laser system Existing peripherals as shown in the pictures Documented service work 06/2026 Service performed by Colibrium Additive / GE Additive VarioScan system including associated E-Box replaced Functional test performed No error messages documented after completion of the work Operating data Laser 1 RET: approx. 26,808 h Laser 2 RET: approx. 38,419 h Note: The RET values describe the time during which the lasers were operational. They do not correspond to the actual exposure or production time. Pgsdpezcn Efofx Ad Ssr Application areas Additive manufacturing of metal components Aerospace industry Automotive industry Tool and mold making Research and development Prototype manufacturing Industrial series production Scope of supply Concept Laser X Line 2000R BC2 main unit Powder handling components Filter technology Existing peripherals as shown in the pictures Further accessories according to the existing scope of supply Condition Used Machine from industrial production environment Laser windows clean and clear Optical condition as shown in the pictures Inspection possible by appointment Availability: upon agreement. Scope of supply as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Condition: good (used), Year of construction: 1989, Saw blade diameter: 400 mm Cutting diameter: 130 mm Pgjdpfox Rvb Sox Ad Sjr Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Weight: approx. 850 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Euro Fintec 410 is a deburring machine which has a 1 inch belt. The belt assembly can be easily adjusted to accommodate complex deburring operations. It comes complete with a dust collection bag to ensure safe operation It is in excellent condition and comes complete with a number of deburring belts. Pjdpezmafqefx Ad Sogr

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. Pgjdpfezl Rfxjx Ad Ssr • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: excellent (used), Year of construction: 2000, Ref:11124 . 2000 Rimagraf Multi Clipper Metal Cornering Machine. A semi-automatic electric and pneumatic two-head machine that simultaneously applies and presses two SYMMETRICAL metal corners of any type and size. The left head is fixed, while the right one can be easily adjusted (from a minimum of 120 mm to a maximum of 500 mm) depending on the size of the cover you are using. The corners are placed in the two loading tanks, which rotate to place them on the guide channels. Finally activate the pressing cycle using the foot pedal. Size-change requires only minimum adjustment. Technical data: Manual load Podpfxezmx Hms Ad Segr Pneumatic connection required Operating voltage: 380V, 50-60Hz Dimensions: 600 x 1250 x 1400 mm Total weight: 180 kg.

Condition: used, Kingsland Compact 40 Metal Working Machine, Punching Cap 20 x 15 & 38 x 8, Shearing Cap 200 x 13 & 350 x 6, Angle Cutting 90 deg, 80 x 80 x 8, 45 deg 50 x 50 x 6, Section Cutting 30 Ø, 25 Sq, 75 x 38 Section. S/No. 400 150 03, Includes Various Punches etc. in Cabinet. Country of Origin: United Kingdom Pgodpfx Aezn Uyfjd Ser Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), functionality: fully functional, REF: MM6472 1 x Fortress Phantom metal detector on inclined conveyor belt with alarm and belt stop on detect reject system. Stainless steel frame mounted on height-adjustable feet. Pgedpfxezqt Hcs Ad Ssr Manufacturer - Fortress Technology. Model - Fortress Phantom. Serial number - K-24417-13183. Aperture dimensions - 550mm wide x 295mm high (clearance). Handing - Inclined, Left to Right. Belt type - Modular plastic. Belt dimensions - 1750mm long x 530mm wide. Electrical requirements - 380 V / 50 hz / 3 phase.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Kaltenbach KBS 400 NA metal bandsaw, automatic (2020) Manufacturer: Kaltenbach Podpfx Ajzww Ausd Sogr Type: KBS 400 NA Year of manufacture: 2020 Condition: used, very good, operational Bandsaw blade (mm): 5,730 x 41 x 1.3 mm Motor power (kW): 4 Cutting speed (mm/min): 15-90 Bandsaw blade feed rate (m/min): 0-300 Swivel range: 115° Round stock 90°: 350 mm Round stock 45°: 350 mm Square stock 90°: 400x350 mm Square stock 45°: 315x350 mm Working height: 720 mm Weight: 3600 kg CNC-controlled cutting angle adjustment Separately driven chip brush Automatic material feed gripper with a stroke length of 2,600 mm for single stroke Hydraulic blade tensioning Electronic bandsaw blade slippage monitoring

Condition: used, Year of construction: 2018, saw blade diameter 550 mm Under-table saw for aluminum and PVC Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard very good condition! Pgodpezvhm Ujfx Ad Ser

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Two cutting speeds Scope of delivery: Podjzwhwvopfx Ad Sjgr - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop - 2x saw blades

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 7,765 h, Behringer HBP 263 AG fully automatic metal bandsaw (2008) Manufacturer: Behringer Model: HBP 263 AG fully automatic metal bandsaw Pgedpfx Aezwhdpjd Ser Year of manufacture: 2008