Used Metal Cutting Tooling Pointer - 380 Sl for sale (48,392)

Condition: good (used), machine/vehicle number: 0159, Year of construction: 2017, Cummins QSL9 380 from Uniktruck Gbjdpfxeyuhf As Ahmer

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension Gbodpfxoi Rixks Ahmsr SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Gbjdsuzv Tzjpfx Ahmjr Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Haffner SL100 door lock milling machine for simultaneously: Milling out the lock case using a chain cutter Milling out the lock faceplate using a faceplate cutter Gbedeztvw Njpfx Ahmsr Drilling out the handle and keyhole using a drill bit. Technical data: - Chain cutter motor: 1.7 kW - Rebating cutter motor: 0.6 kW - Drill motor: 0.25 kW - Blade length: 150 mm - Chain width: 12–17 mm

Condition: used, Year of construction: 2006, Offer in progress! Gbodpfx Ajwftufjhmjr

Condition: used, Year of construction: 1990, Motor output 5 kW Gjdpfxowgnz Ne Ahmjbr Weight 1.500 kg Control cnc

Condition: used, Year of construction: 1992, max. grinding diameter 0 mm grinding length 0 mm workpiece length 970 mm total power requirement 12 kW weight of the machine ca. 5 t dimensions of the machine ca. m Godpfx Aot Hwpaohmsbr

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Gbodpjzinzrsfx Ahmsr Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Condition: used, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Milling machine, second-hand Gbedpfstud Utox Ahmjr Make: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial No. 9401487 Technical data: X-travel 762 mm Y-travel 406 mm Z-travel 508 mm Spindle holder: SK 40 Spindle speed 8000 rpm Machine weight: 3800 kg

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Gbjdjzc Iztjpfx Ahmjr Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Gbedpjzc Izgofx Ahmer Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 100 x 100 x 5400 mm Total length:3100mm Gedszc Iypopfx Ahmobr Total hight:75mm V-size: 10 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Gedpfswdihrox Ahmobr Jungner Sweden Built in 1995 Accessories

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm Gbsdpfxszavqwe Ahmjr C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Gbsdpjv Azb Njfx Ahmjr

Condition: new, Technical Data: Fixed angle table: Clamping surface of the fixed angle table: 800 x 400 mm Max. table load: 200 kg Working spindle: Tool holder, horizontal and vertical: ISO 40 Power of the main drive motor / 100% duty cycle: 2.2 kW Vertical milling head: Speed range, stepped: (12) 50 - 2000 rpm Drill quill, stroke: 100 mm Swivel range: +/- 90° Travel distances: X-axis, automatic/manual: 385/400 mm Y-axis, automatic/manual: 185/200 mm Z-axis, automatic/manual: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: continuously adjustable Rapid traverse: 1000 mm/min Features: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle runout max. 0.005 mm, incl. test report according to DIN 8615 (roller bearings SKF®/NSK®) - Vertical milling head can be swiveled for horizontal milling (without disassembly) - All critical parts of the machine, e.g. machine frame, table, milling head, housing, etc., are made of stress-relieved MEEHANITE® quality cast iron (FC 30) and are extensively ribbed to provide the machine with maximum stability and working accuracy. All guide rails are coated with TURCITE®-B - All machined surfaces in the working area, such as guide rails, table surfaces, T-slots, etc., are hardened and precision-ground. - The powerful drive transmits the power of the main motor to the gearbox via belts. - All axes have their own DC servo motors. These enable sensitive, stepless adjustment of the feed speed. Standard equipment: - DC servo motors for all axes X/Y/Z, incl. electromagnetic brake - Fixed box table - Original Ganter Norm® safety handwheels - Chip collection tray - Backlash-free HIWIN® precision ball screws in all axes X/Y/Z - Gearbox for main spindle - Safety device according to CE or better: Gsdpfsd R S Ndex Ahmsbr - Spindle guard with several micro-switches, adjustable in several steps (enclosure available as an option) - Two emergency stop pushbuttons (1 x machine frame, 1 x control panel) - Mechanical Ganter Norm® safety handwheels in all axes - Electromagnetic spindle brake (for immediate spindle stop) - Electrical overload protection for all axes - Electrical equipment SIEMENS®, BALLUFF® - Braking system prevents the table from dropping - Three reducing sleeves SK 40 to MK 1, 2, 3 - Collet chuck with holder according to DIN 2080 incl. collet set (Ø 6, 8, 10, 12, 16, 20, 25 mm) - Draw-in thread spindle - Horizontal milling arbor (Ø27 mm) - Automatic central lubrication - Lamellar stainless steel cover for the Z-axis guide rail in the working area - Machine light - Coolant system integrated in the machine base - Test report according to DIN 8615 - Operating tool - Machine according to CE - Operating manual, parts list, incl. electrical wiring diagrams, etc.

Condition: reconditioned (used), Year of construction: 1987, Universal toolroom milling machine DECKEL FP 1 With 3 axes active digital display Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 - 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drilling spindle sleeve Stepless feed via potentiometer 1 pcs. Machine vice 1 pc. Counterholder with counterbearing Godpfxopxm Anj Ahmobr 1 pc. Milling arbor long 0 22 mm Various tool holders S 22 x 2 Bellows Z axis Machine light Automatic central lubrication pump Chip collecting plate Coolant device Operating instructions THE MACHINE IS IN A VERY GOOD CONDITION !!!

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows Gedpfxow Agxrj Ahmobr 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: used, Year of construction: 1999, machine/vehicle number: 2632, Item No. 24108 Technical data: - Saw blade dimensions: up to 300 x 2.0 x 40 mm - 2 saw blade spindle speeds: 40 + 80 1/min - Cutting range: at 90° - Round: 100 mm - Flat: 120 x 85 mm - Miter adjustable: - Left: up to 45° - Right: up to 30° - Material clamping device Gbodpszibxwjfx Ahmor - Drive: 400 V / 1.0 / 1.2 kW - Space requirement: approx. W 600 x H 800 x D 700 mm - Weight: approx. 180 kg

Condition: excellent (used), Year of construction: 2020, overall weight: 160 kg, total length: 1,200 mm, total width: 800 mm, total height: 400 mm, Metal cutting Tooling SMW AUTOBLOK - RX4-ZSW Premium Line self centering extra compact Integrated cylinder Sealed body Chip guard with coolant nozzles Stroke control with proxi switch Roller for in arm not included C type steady:Yes Min. Diameter:35 Max. Diameter:350 Length: 1200mm Width: 800mm Height: 400mm Weight: 160kg Gbsdpfx Asyi Tr Rohmer Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1983, travel distance X-axis: 410 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 400 mm, Control: Positioning and travel control including display HEIDENHAIN TNC 135, 3-axis manual control TECHNICAL DATA Working area X-axis (longitudinal), manual/automatic: 410/390 mm Y-axis (transverse), manual/automatic: 310/290 mm Z-axis (vertical), manual/automatic: 400/380 mm Arbor stroke, vertical: 63 mm Tilting table clamping surface: 700 x 285 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Step ratio (geometrically stepped): 1.4 Tool holder (DIN 2079): ISO 40 EQUIPMENT/ACCESSORIES  Manual operation and CNC program control  Vertical and horizontal machining  Tilting vertical milling head  Angle-adjustable vertical milling head  Vertical quill feed, manual  Tilting table  Coolant system  Coolant and chip tray  Chip guard in the working area  Mounting elements  Documentation Gsdpsht Hbujfx Ahmjbr

Condition: excellent (used), Tool and cutter grinder AUTOOL model VS300 Gjdsxfk T Aopfx Ahmjbr

Condition: like new (used), Tool and cutter grinder GRIFO model U10 Gbjdpfx Aeinbilehmsr

Condition: used, Year of construction: 2001, longitudinal feed X: 490 mm Vertical feed Y: 320 mm cross travel Z: 660 mm Swivel range C: +/- 200 ° Control HMC 500 WWM Walter lenght tool piece capture A: 175 mm ISO 50 Max. rpm A: 60 min/-1 centre height 145 (190) mm max. workpiecediameter 320 mm max. workpiece length 320 (350) mm resolution 0,0001 ° Resolution 0,0001 mm spindle diameter 80 mm grinding wheel diameter max. 200 mm Max. rpm 0 - 7.000 min/-1 driving power - grinding spindle 24 kW max. Torque 6 Nm total power requirement 35 kVA weight of the machine ca. 4,65 t dimensions of the machine ca. 3,6 x 2,5 x 2,95 m CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production - Optional for an additional charge: Gjdsw E Npxjpfx Ahmebr WALTER Heli ToolCheck (stock number 1039-9375) ?m=1039-9375&s=WALTER%20Heli%20Toolcheck

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition Gjdpfx Ahjyxy S Romsbr