Used Keyence Agilista-3200W for sale (140)

Condition: good (used), Camera-based code readers, uEye camera, industrial camera, high-performance camera Fjdpfexyh Dnjx Aivjgh -Manufacturer: Keyence, Industrial camera, 16x speed, 5-megapixel camera (B/W) -Type: CA-H500MX -Dimensions: 115/70/H60 mm -Weight: 0.4 kg

Condition: excellent (used), Marking laser, control unit, full-spectrum sensor, sensor -Manufacturer: Keyence, full-spectrum sensor, unused, original packaging -Type: LR-W500C -Voltage: 10-30V DC -Cardboard dimensions: 180/110/H650 mm -Weight: 0.2 kg Fgjdpex Swh Aofx Aivjh

Condition: new, Keyence LJ-G200 laser, unused, unused in opened original packaging, 100% functional, scope of delivery as per photos. Fodpfx Aey Nrxqsivsgh

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance.” Fsdjzh Au Dspfx Aivsgh Quantity: 6 available Measuring head GT2-H32 Keyence

Condition: good (used), Measuring amplifier, power supply module, point-type measuring amplifier, ionizer, static eliminator, static eliminator -Manufacturer: Keyence, Static Eliminator Stabilizer -Type: SJ-M300 -Dimensions: 130/70/H35 mm -Weight: 0.1 kg Fodpfx Aeyhbr Njivegh

Condition: good (used), Camera-based code readers, uEye camera, industrial camera, high-performance camera -Manufacturer: Keyence, Industrial camera, 16x speed, 2-megapixel camera (B/W) -Type: CA-H200MX -Dimensions: 115/70/H60 mm -Weight: 0.4 kg Fjdsxyh Aqepfx Aivogh

Condition: good (used), Measuring amplifier, power supply module, measuring amplifier point design -Manufacturer: Keyence, Measuring amplifier point version -Type: SJ-M300 Fodex S Evzopfx Aivogh -Dimensions: 130/50/H75 mm -Weight: 0.2 kg

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Fjdpfxezd Rmgj Aivegh Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers Fjdpfx Aiezhub Aovjgh - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Fedpfx Aiezpzbfevsgh Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Outfeed station Servo drives Stainless steel GMP design Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Factory upgrade already in 2018 Complete FAT at the manufacturer Very well-maintained condition Immediately available Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) Fedpfx Aezc N Axeivegh End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: used, functionality: unexamined, Wohlenberg 115 with cut computer and light barrier The machine cuts and the programs run, but the dimension display has an offset (parallel) from the actual dimension (probably simply adjustable). Fgedpfxozua N Ej Aivsh New Keyence light grid, 2024. Loading costs for forklift rental are extra (approx. 350 - 500). Items are loaded onto the truck loose.

Condition: ready for operation (used), Year of construction: 2013, controller manufacturer: SIEMENS, number of axes: 3, This TRUMPF TruLaser 3030 (L20) was manufactured in 2013. A robust CO2 laser cutting machine, it features a Siemens control system, a laser power of 3200W, and workpiece dimensions of 3000 x 1500 mm. With a travel speed of 140 m/min, it ensures efficient operation. Consider the opportunity to buy this TRUMPF TruLaser 3030 (L20) CO2 laser cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working hours / laser beam on 49000 h Fedpfxozvu Ske Aivsgh • Longitudinal travel x-axis: 3000 mm • Cross travel y-axis: 1500 mm • Height travel z-axis: 115 mm • Travel speed: 140 m/min • Workpiece dimensions: 3000 x 1500 mm • Laser power: 3200w • Type of laser: truflow Extra Information Machine still under power

Year of construction: 2021, condition: used, Manufacturer : Thémis Technologies Model: 5173 TT Year: 2021 Fgjdpfx Aiox R Aqtovoh Type: UV laser marking station Laser : keyence mdu1000C Application: The equipment is designed to laser mark different products with different types of materials. - Glass or plastic jars of different diameters - Coloured plastic bottles of different sizes - Coloured plastic tubes This equipment performs the following functions: - Receiving the product from a conveyor belt. - Detection of the product at the entrance of the machine. - Transition of the product to the laser. - When a bottle is detected, activation of the suction and laser marking. - Discharge of the marked product. A Bofa Ad Access vacuum cleaner is placed on the side outside the cabin and connected to a nozzle near the marking area. Height: 2150 mm (with glasses) Width: 1250 mm (without screen) Length: 2530 mm (with conveyor) Equipment included: printer, control computer, ... Documentation, drawings, backup, software available.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. Fedpfx Aiozwvu Nsvjgh The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles Fjdpfxog Iihwe Aivsgh e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: used, Year of construction: 2014, Material: PET aluminum-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4– 153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback detector • Dancer roll included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” via adapter • Web alignment: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and touch rollers with pneumatic pressure control 3. Slitting Mechanism • Upper/lower NC shear cutter • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Accuracy: ±0.1–0.2 mm • Dust suction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Placement: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roll control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Touch roll with pressure control • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilt mechanism Electrical & control: Line motor: 7.5 kW AC servo Winding motor: 11 kW AC induction Unwinding motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwind panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Fgjdpfx Aox Ez Umeivoh Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Floor load capacity requirement: ≥ 2 ton/m²

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance Fjdpfx Aiszv Twxjvogh - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Board Sorting and Sawing System for Sawmills With its fully automatic board sorting and sawing system, JAC Automation & Robotics GmbH offers a powerful solution for significantly reducing manual operations in sawmills and wood processing companies. The system handles the entire process, from the unsorted raw material stack to the finished, sorted, and stacked boards. A reference system is already in successful operation at a sawmill. Your advantages • fully automatic and autonomous system operation • significant reduction in manual handling • relief from personnel shortages • fewer errors due to incorrect sorting • reproducible quality • automatic stacking • flexible allocation based on length and width • automatic defect detection • modular, expandable design In the current manual process, an employee may have to pick up and move a board up to four times. With the automated system, this handling is completely eliminated. Workpiece range • Length: approx. 1,700–5,200 mm • Width: approx. 95–310 mm • Thickness: approx. 30 mm • other dimensions available upon request Automatic process The raw boards are picked up by a KUKA robot and automatically fed to the measuring and sawing station. Length and width are determined using laser sensors. In addition, boards that are too severely warped can be detected and automatically sorted out. Each board can be sawn at both ends. Alternatively, a pure sorting operation without sawing is also possible. Sawdust and waste are automatically transported via a chute and a conveyor belt to a waste container located outside the system. Flexible sorting The reference system has: Fgsdpfxezz Sugs Aivoh • 10 freely configurable sorting and stacking locations • 2 reject locations • 2 raw material locations The operator can freely define which length and width ranges are placed on which stacking location. The finished boards are stacked fully automatically. Optionally, intermediate strips can be inserted between the individual layers. Performance With a high variety of products, the reference system achieves approximately: • 4 boards per minute • up to approximately 240 boards per hour Technology • 2 × KUKA KR 120 R3900-K • 1 × KUKA linear unit • Siemens S7-1500 • Siemens F-CPU • 19" touch panel • WinCC Runtime • Production and piece count recording • Remote maintenance via Weidmüller router • Safety fence and Keyence light curtains Individually adaptable The system is newly manufactured and planned according to customer specifications. Layout, workpiece range, number of sorting locations, and the range of functions can be adapted. Optionally, an expansion with AI-based camera technology for detecting wood defects and quality characteristics is possible. Reference area: approx. 25 × 15 m JAC handles the complete project management, including design, manufacturing, programming, assembly, commissioning, and training. Delivery time: approx. 6-8 months after technical clarification and order release. Europe-wide delivery and commissioning are possible. Price on request.

Condition: good (used), functionality: fully functional, For sale: a fully functional Dematic carousel sorter, currently in daily use in our e-commerce fulfillment center in Ingelmunster (Belgium). Completely modernized in 2023: new Siemens PLC control, Keyence SR-5000 barcode scanner (Profinet), Beckhoff servo drives via Profinet/EtherCAT gateway, and a new control PC with visualization, alarm history, status per destination, and manual mode per actuator. Connection to ERP via JSON or SQL. Configuration: infeed conveyor with barcode scanning, splitter, inclined conveyor, and carousel sorter that automatically drops items (including textiles in polybags) into destination boxes. Reason for sale: reorganization of our warehouse around a new, integrated sorting and packaging concept. Fgjdpfx Aoz E Hxreivoh Inspection while in operation is possible; video available upon request. Available until early 2027. Disassembly and transport are the responsibility of the buyer. Ideal for e-commerce, 3PL, textile, and retail distribution.

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head Fgjdszv Sarspfx Aivsh + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: new, Year of construction: 2025, functionality: fully functional, Robotic Case Packing Station for Display Cartons The offer does not include implementation, installation, and transport. Automated packaging line designed for packing products into display cartons and plastic E2 containers. The machine is brand new (post-production tests completed). Operating Description: Automatically picks, glues, and forms cartons, placing them onto a conveyor. Products are identified by a Keyence vision system on the input conveyor. Fjdowmm Tdspfx Aivjgh An advanced line-tracking system calculates the precise pick location for one of the three FANUC M3IA6S delta robots. Vacuum gripper-equipped robots accurately place products into cartons, automatically queuing them. A FANUC LRM200ID (6-axis robot) automatically places lids onto cartons. The completed carton is sealed by a Nordson system and exits the machine. Quick automatic changeover capability to E2 plastic containers (changeover time less than 1 minute). Technical Parameters: Carton forming: 6-7 pcs/min. Product packing rate: 100-110 packs/min (carton or E2) Changeover between carton types: under 5 min (with operator) Changeover carton ↔ E2: under 1 min (fully automatic) Equipment Specification: Delta robots: 3 × FANUC M3IA6S 6-axis robot: FANUC LRM200ID Control system: Allen Bradley GuardLogix 5380 PLC Servo drives: Kinetix 5100, Kinetix 5700 Pneumatic and gantry drives: FESTO Motor drives: NORD Safety: Magnetic safety locks Keyence GS-M Vision system: Keyence monochrome camera 2 MPX, ring lighting Sealing system: Nordson MELTER PBF240 Operator panel: Allen Bradley PanelView 5510 (19", color) Structure: Modular stainless steel (easy transport and installation) Machine available immediately, brand new equipment. Tests and adaptation to specific product requirements are possible. Price does not include installation or product-specific adaptation costs. The featured video of the machine's operation shows the previous model.

Condition: good (used), Year of construction: 2009, 1 used induction shrinking device Manufacturer: BILZ Model: Thermo Grip ISG 3200-WK Year of manufacture: 04/2009 Serial number: 0461 Tool holder: Ø 54 mm Tools, carbide: Ø 3–50 mm Tools, HSS: Ø 6–50 mm Cooling: Water cooling Coolant tank: 30 liters, integrated Coolant: Emulsion Runout accuracy: < 0.003 mm Clamping system: ThermoGrip Operation: Control panel Dimensions (L × W × H): approx. 700 × 650 × 1,700 mm Weight: approx. 120 kg Connection: 3 × 400 V Frequency: 50–60 Hz Connected power: 11 kW Compressed air: 6–10 bar Cooling: Integrated water cooling Control: Digital control panel CE marking: Present Fodpfx Aoz E Hmceivegh Accessories and scope of delivery Various reducing rings and exchangeable discs Tool holders for different chucks Induction coil with height adjustment Integrated cooling unit Original operating manual from BILZ/KOMET, including EC declaration of conformity

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 66700 € 1260.63 € 50 to 3.5 mm 800 mm 450 mm 22 - 110 mm 60 - 100 1/min 70 mm 8 70 mm 235 mm 290 mm 5.5 kW 1330 mm 1000 mm 2650 mm 4500 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector double bolster plate oil circular lubrication Fjdpfsyq Sqnsx Aivegh dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector

Condition: new, pressing force: 280 t, 280 t servo double-column heated press with heating plates We can offer you this press at a particularly attractive price, as the machine is already under construction and the original customer has cancelled an order for two identical machines. This gives you the opportunity to purchase a high-quality servo-hydraulic double-column press with heating plates under favorable conditions and with comparatively short lead times. The photos shown depict similar, previously built machines from the factory and are for reference purposes only. Technical data & information: ==== General information Press force: 280 t Design: servo double-column heated press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides Clear width between uprights: 1,250 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. damping plates and heating plate: 900 mm Overall height approx.: 3,500 mm Width incl. control cabinet approx.: 2,200 mm Depth approx.: 1,200 mm Weight approx.: 13,000 kg ==== Table & Ram Fixed lower table with T-slots: 1,250 × 800 mm Ram with T-slots: 700 × 800 mm Heating plate: 600 × 600 × 80 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic power unit: Duplomatic Hydraulic pump: Rexroth / Baumüller / Servo Pump capacity: 72 l/min Motor power: 10 kW Servo hydraulics: included Control: Siemens S7-1200 with Siemens MTP 1000 touchscreen display Programming: up to 50 programs Travel measurement: encoder Pressure measurement: data recording ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Fodpfxsyynale Aivjgh Passive pressure-holding function for up to 15 minutes Electrically heated plates up to 250 °C Heating capacity: 24 kW Temperature monitoring and heating element control via monitor Piece counter Alarm management Downward accuracy: 0.1 mm Stroke limitation via Leuze measuring rod and monitor Two-hand operation Ram return via operating button Light curtain protection front and rear up to 2,500 mm height CE certificate and user manual included Control cabinet with Siemens components Safety systems by Sick / Pilz / Keyence / Datalogic ==== Additional included features 40 mm thick base plate with chamfered ramp 4 vibration damping plates Energy-saving servo hydraulics Applications: Heated presses, compression molding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical molded parts, lamination processes, industrial special applications Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression molding press, press with heating plates, industrial machine, special machine, tool adjustment press, tryout press, tool try out press.