Used Kellenberger Ag Case Packer for sale (8,731)

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dedpfxor Ix Igj Aa Hekt Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Dodpfjy Szbyox Aa Hekt

Condition: excellent (used), functionality: fully functional, MONDINI EVOLUZIONE SUPER E380VG PET Packaging Line for Solids and Liquids MONDINI EVOLUZIONE SUPER E380VG automatic packaging line, designed for filling and packaging solid and liquid products in PET containers, integrating different dosing and handling operations within a single industrial facility. The line combines a multi-head weighing and dosing system for solid products with stations for incorporating liquid components, enabling formulations in which the container contains a solid part and a covering liquid, sauce, brine, or other liquid component, depending on the installed configuration. Its construction, primarily in stainless steel, elevated platform, automatic transport systems, and safety enclosures, provides a complete solution for professional food packaging lines. MAIN FEATURES -Manufacturer: MONDINI -Model: EVOLUZIONE SUPER E380VG -Type: Automatic PET packaging line -Application: Solid + liquid products -Automatic container feeding system -Solid product dosing -Integrated multi-head weigher -Weight-controlled dosing -Independent system for liquid incorporation Djdpfx Aaswny Rxo Hskt -Automatic container transport -Synchronized positioning at stations -Elevated platform for dosing equipment -Structure and processing areas mainly in stainless steel -Safety enclosures and protections -Continuous industrial operation -Integrable with inspection and end-of-line equipment PROCESS PET containers are automatically fed into the line and transported to the various processing stations. The solid product is fed to the multi-head weigher, where it is divided into different portions, and the appropriate combination is selected to achieve the target weight. Subsequently, the dose is discharged into each container. In a later stage, the liquid component can be incorporated, allowing the product to be completed before the final packaging operations. The line can be combined with: PET container feeders Multi-head weighers Liquid dispensers Product feeding systems Sealing/closing equipment Weight controllers Metal detectors Labelers Case packers and end-of-line equipment APPLICATIONS Particularly suitable for canning industries, manufacturers of ready meals, processed vegetables, pickles, and other food companies that need to package combinations of solid and liquid products. Depending on the installed configuration, it can be suitable for vegetables, legumes, olives, pickles, prepared products, and other foods with covering liquids or sauces. The combination of MONDINI EVOLUZIONE SUPER E380VG, multi-head dosing, and filling of solids and liquids provides an automated solution for PET packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z Dksdezkvucjpfx Aa Het -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Schleifscheibenausrüstung jeweils 400x63x127mm -Einrichtung zum Betrieb einer HF-Spindel -Spindel optional gegen Aufpreis -B-Achse CNC gesteuert zum Aussen-Plan- und Innenschleifen in einer Aufspannung. Schwenkbereich +10°/-270° -C-Achse zum Polygonschleifen -Unterteil fest -Schleifkopfmotor 10,0 KW -Reitstock -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs

Condition: used, TECHNICAL DETAILS - Distance between centers : 600 [mm] - center height : 125 [mm] - Table orientation : 11 [°] Dsdjzf Rcdopfx Aa Hjkt GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] TAILSTOCK - Internal cone : MT4 - Quill stroke : 30 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2580 x 1680 [mm] - Machine height : 1670 [mm] - Machine weight : 2200 [kg] EQUIPMENT - Coolant tank * with paper filtering unit - 1 internal grinding spindle - Lubricating tank with pump - 1 three-key steady rest - 1 inner spindle alignment device

Condition: used, Year of construction: 2014, operating hours: 4,908 h, machine/vehicle number: LC658, Used Tetra Pak A3 Speed V40 250ml Prisma filling lineTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak aseptic carton solution centered on the A3 Speed filler. Engineered for industrial packaging and beverage production, it delivers high output with precise handling of Prisma cartons. All core modules share the same manufacturing year, providing a cohesive and modern second hand system suitable for efficient aseptic operations.Production speed: up to 24,000 packages/hourPrimary format: 0.25L Prisma cartonContainer type: Carton (aseptic brik)Filler: Tetra Pak A3 Speed, version 040V, year 2014, working hours 4,908Accumulator: Tetra Pak ACHX 30, version 070V, year 2014, working hours 5,528Straw applicator: Tetra Pak SA30, version 040V, year 2014, working hours 5,821Case packer: Tetra Pak CBP30 Speed, version 030V, year 2014, working hours 38Filling process: Aseptic carton fillingManufacturer: Tetra PakAdvanced Automation & Control SystemsThe line combines Tetra Pak engineering across all modules for synchronized operation and high uptime. Centralized operator interfaces and coordinated control logic simplify start-up, ramp-up, and stop sequences, while ensuring consistent product and package quality across the filling, straw application, accumulation, and case packing stages. Format handling for 0.25L Prisma cartons is streamlined with fast, repeatable adjustments and clear operator guidance.Integrated line control for coordinated speeds and bufferingOperator-friendly HMI on core equipmentAutomated interlocks across modules for safe operationRecipe-based format management for 0.25L Prisma cartonsProduction Line Integration CapabilitiesDesigned as an inline solution, this used bottling line accommodates continuous flow from aseptic carton filling to secondary packaging. The accumulator provides essential buffering to keep the filler running during short downstream stops. The straw applicator and case packer complete a compact, high-throughput configuration for beverage production.Machine typeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed (040V)2014Various EquipmentStraw Applicator Tetra Pak SA30 (040V)2014Various EquipmentAccumulation System Tetra Pak ACHX 30 (070V)2014Case PackerTetra Pak CBP30 Speed (030V)... Dodpfxezmpzbj Aa Hskt

Condition: used, Year of construction: 2019, operating hours: 1,360 h, Mini excavator CASE CX26C, * Year of manufacture 2019, * 1360 operating hours, * Heating, * Air conditioning, * Rubber tracks, * Dozer blade, Dkjdpfx Aeurfkcja Hot * Quick coupler

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data - Line type: Returnable glass bottling line - Application: Beverage filling in returnable glass bottles - Formats: 0.33 L and 0.75 L glass bottles - Packaging: Bottles in crates - Filler capacity: 18,000 bottles/hour - Premix capacity: 22,000 L/hour - Closure type: Plastic screw caps - Labelling: Wet glue labelling, 2 aggregates - Main machine years: 1996 – 2016 - Dismantling planned: February 2027 Scope of Delivery - Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated - Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 - Crate Decapper | RINK | KM 690/4K | 2012 - Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 - Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 - Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 - Empty Bottle Inspector | Krones | Linatronic | 2014 - Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 - Labelling Machine | Krones | Universella | 2012 Djdpfx Aaoza Tx Sj Hjkt - Closure Inspection | Syscona | Expert FHK | 2016 - Inspection System | Krones | Checkmat 731 | 2012 - Crate Packer | Kettner | 1996 - Crate Inspection | Krones | Checkmat 708 | 2011 - Palletizer | Matec | Rotomat 3B | 2002 - Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000

Condition: new, I am offering for sale an original, high-voltage traction inverter by Bosch, intended for Volkswagen AG, with part number 95C 907 123 EM27. This is a development component (ETK – Entwicklungs-Test-Komponente) used during research and development work on electric drive systems. The unit comes directly from a Bosch/VW development project and is housed in its original Bosch transport case with foam padding. The package also includes the original transport documentation and high-voltage test and inspection reports, confirming that quality control has been carried out. The inverter is responsible for converting direct current from the high-voltage battery into three-phase alternating current to power the electric motor. It is one of the key components of an electric vehicle’s drive system. Technical specifications: Manufacturer: Bosch Project customer: Volkswagen AG OEM number: 95C 907 123 Version: 95C 907 123 EM27 Bosch number: 0437.B00.0LV-01 Development version: C1-Muster 600A ETK Country of manufacture: Germany Included in the set: Bosch high-voltage inverter Original Bosch transport case Foam transport protection Bosch transport documentation Test and quality control reports Condition: Dodpfx Ajzl H Hxja Hskt 100% technically functional. Very good visual condition. Complete with original documentation and transport case. Sold exactly as shown in the pictures.

Condition: like new (used), -Dimensions (L x W x H): 1660 x 11180 x 1261 mm -Temperature: +0/+4°C -Refrigerant gas: R404 -Fan-cooled refrigeration -Refrigerated reserve -Version for deli/packaged meat -Digital control -Digital controller and thermometer -Various layout and decoration options -Fan-cooled refrigeration system -This refrigerated display case features a very large display area for product presentation (900 mm) – the largest on the market – which maximizes product visibility. The refrigeration is achieved through fan-cooled technology, which optimizes cooling conditions and distribution, while also guaranteeing the freshness and quality of the displayed food. -Interior, shelves, and work surface made of stainless steel -Hydraulic anti-condensation front glass -Refrigerant gas R404A used in accordance with environmental standards -High-pressure injected polyurethane insulation, CFC-free, with a density of 40 kg/m³ -Customizable front decoration Dkedpfxozyq Agj Aa Hot -Transparent glass front deflector -Top interior lighting for meat

Condition: used, functionality: fully functional, Kellenberger cylindrical grinding machine in very good condition. Available at a favorable price. Price significantly reduced !!!!! Dodpfx Aew Dy Rqoa Hekt

Condition: excellent (used), Huber & Ranner HVAC System (Air Handling Unit) Offered for sale is a high-quality, multi-stage industrial ventilation and air conditioning system from the premium manufacturer Huber & Ranner. The unit was previously used as a recirculation system for a paint spray booth and is in excellent, clean, and professionally maintained condition. The system controls the complete air climate (filtering, cooling, humidifying, and air transport) and is ideally suited for production halls, paint shops, wood or metal processing facilities, and large-scale industrial projects. Technical specifications of the complete system: Dodszrmctepfx Aa Hekt Manufacturer: Huber & Ranner GmbH (Made in Germany) Type / Size: X-CASE 15 (System designation: SPK ULA) Order number: 19 0090 Z / P.010 Airflow rate / Air capacity: 31,000 m³/h Module components in detail: High-performance fan module: Motor power: 30 kW Static pressure: 1,855 Pa Voltage: 3x400 V / Rated current: 55 A Max. frequency: 49.7 (54.4) Hz Integrated cooling coil (cooler): Cooling capacity: 50 kW Material: Cu / Al (Copper/Aluminum) Refrigerant: R134a High-efficiency filter stage: Filter class: F9 / Standard (fine dust filter for maximum air purity) Filter type: TM 9U635A10-1 (Quantity: 9 units) Recommended final pressure: 250 Pa Humidifier & droplet separator module: For precise humidity regulation; includes an integrated droplet separator to prevent moisture carry-over into the air duct. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Soco System Carton / Case Sealer With top and bottom tape heads Model: T-100 380 V, 3 Ph Plastic roller belt, roller width: (2x) 300 mm Total dimensions: 1540 mm x 800 mm Dsdpfx Aajhlp E As Hokt

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: diesel, operation weight: 7,500 kg, axle configuration: 4x2, first registration: 10/1977, Year of construction: 1977, Equipment: hydraulics, Technically in order Dedpot S Idrsfx Aa Hjkt

Condition: excellent (used), power: 115 kW (156.36 HP), fuel type: diesel, color: orange, first registration: 07/2013, Year of construction: 2012, operating hours: 15,109 h, Equipment: air conditioning, General information Model year: 2012 Serial number: DCH210R5NCEAH2500 Technical information Number of cylinders: 4 Empty weight: 22.600 kg Functional Dedpfx Aajy En Nde Hekt Working width: 300 cm Number of valves: 4 CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Warranty Warranty: From first owner, with full maintenance records, ready to work! - 80% undercarriage - 3 buckets included: 1300mm, 450mm, and 2000mm cleaning bucket - Optionally with 2021 TOPCON 3D SYSTEM Additional information Please contact Ernst van Hek for more information = Additional options and accessories = - 3rd valve - 4rd valve - Central lubrication - Central lubrication system - Climate control - Heater - Radio/CD player - Rotating beacon - Spotlight front - Spotlight rear = Remarks = Case CX210B Tracked Excavator (2012 / First use July 2013) Hours: 15,109 hrs | Weight: 22,600 kg Engine: Isuzu 4HK1X (117.3 kW / 157 HP) Undercarriage: 80% remaining Buckets: 1300mm bucket with teeth, 450mm trench bucket with teeth, 2000mm cleaning bucket Features: Air conditioning, central greasing system Condition: Directly from first owner, including full maintenance history!

Condition: used, Year of construction: 2008, operating hours: 23,600 h, functionality: fully functional, machine/vehicle number: 632025, TSCHUDIN T35 – CNC High-Precision Cylindrical Grinding Machine with Siemens Sinumerik 840D Year of manufacture: 2008 · Machine No.: 632025 · Approx. 23,600 spindle hours · Incl. SECKLER production cell, STREULI filtration system, DITTEL unbalance measuring device TECHNICAL DATA • Manufacturer: HTT KELLENBERGER (now Hardinge / L. Kellenberger & Co. AG) • Model: Tschudin T35 / Siemens • Machine No.: 632025 (original nameplate) • Circuit diagram: E-632025 • Year: 2008 • Control: Siemens Sinumerik 840D with grinding software • Travel paths: Z 600 mm / X 350 mm • Supply voltage: 3 × 400 VAC, 50 Hz • Control voltage: 24 VDC Dksdpfx Aoy Eqiqsa Hjt • Connected load: 16 kVA • Weight: approx. 6,400 kg • Spindle operating time (machine ON): approx. 23,600 h • Centre distance (machine class): up to 400 mm • Centre height: 175 mm • Max. workpiece weight: 150 kg • Grinding wheel diameter: 400 – 600 mm • Guideways: Hydrostatic • Max. cutting speed: up to 120 m/s (ball bearing variant) INTEGRATED AUTOMATION & AUXILIARY SYSTEMS • SECKLER robot magazine – autonomous production cell (robot loading, workpiece magazine, sorting conveyors for good / SPC / scrap parts) • DITTEL M5000 unbalance measuring device • STREULI filtration system MZ 150 (year 2005, fine filtration) CONDITION & HIGHLIGHTS Used machine, fully functional • Siemens Sinumerik 840D with grinding software • Hydrostatic guideways – precision class • Autonomous SECKLER production cell • Integrated DITTEL M5000 unbalance measuring device • STREULI MZ 150 coolant filtration system • Regular maintenance documented by Johnson Controls (last in 2024, next due 04/2025) • Removed from ongoing serial production at a precision parts manufacturer ABOUT THE MACHINE The Tschudin T35 is a modular production external cylindrical grinding machine for medium and large series. Originally developed by Swiss company HTT Hauser Tripet Tschudin AG, now under the Kellenberger/Hardinge Group. The offered machine was operated in conjunction with a complete SECKLER production cell – fully automated 24/7 operation is possible. The Siemens Sinumerik 840D control system features grinding software developed by grinding specialists and allows optimal programming of grinding and dressing processes. The hydrostatic guideways guarantee highest precision in series production; the ball bearing variant allows cutting speeds up to 120 m/s. SCOPE OF DELIVERY • Tschudin T35 base machine with Siemens Sinumerik 840D • Complete SECKLER automation cell (incl. control cabinet) • DITTEL M5000 unbalance measuring device • STREULI MZ 150 coolant filtration system (year 2005) • Existing grinding wheel flanges LOCATION & TRANSPORT Location: Central warehouse, Köck Auction House, 6178 Unterperfuss, Austria. Inspection prior to purchase strongly recommended. All information without guarantee. Auction content is solely the described item. Used machine – sale excludes any warranty. Errors and typographical mistakes excepted.

Condition: used, functionality: fully functional, For sale is a high-precision universal and tool grinding machine, Strausak AG, Type 57U. Thanks to its versatile design with a cross table, it is ideal for tool, mold, and gauge manufacturing. It handles demanding grinding tasks on highly hardened workpieces (even in the range of 60–65 HRC) with absolute reliability. The spindle speed can be flexibly adjusted, and the maximum longitudinal travel of the X-axis is 600 mm with a center distance of 780 mm. The machine is in good condition. Machine Type 57U Manufacturing No. (Serial Number) 10686 Order No. 44137 Voltage (Volts) 380 V Frequency (Hz) 50 Hz Technical Feature Specification Max. Table Stroke / Longitudinal Travel (X-axis) 600 mm Center Distance (Workpiece Length max.) 780 mm Center Height 125 mm – 175 mm (depending on height blocks) Max. Grinding Diameter approx. 348 mm Table Dimensions 1,030 mm x 214 mm Table Swivel Range ± 9° Machine Weight (Net) approx. 2,500 kg (Shipping Weight approx. 2,700–2,800 kg) Net Machine Dimensions (L x W x H) approx. 2.30 m x 1.50 m x 1.50 m Recommended Space Requirement (Installation) at least 3.50 m x 2.50 m Spindle Speeds Continuously variable / Belt stages from 2,250 to 6,000 rpm Dedjv E Ivfspfx Aa Hokt Table Feed Continuously adjustable from 0 to 16 mm/min Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2022, A complete tube filling and packaging line for ointments is available. 1) Tube feeder IWK TZK 200, year of manufacture: 1991. 2) Tube filling machine IWK TFS 30, year of manufacture: 1991. 3) Cartoner IWK CPS-R, year of manufacture: 1991. 4) Serializer Laetus MV-70-F-130-TL, year of manufacture: 2019. 5) Checkweigher Mettler & Toledo C3570, year of manufacture: 2019. 6) Bundle packer Kiener ASK 450, year of manufacture: 1993. 7) Case packer Skinetta PAL 145, year of manufacture: 1997. 8) Palletizer Skinetta PAL 1400, year of manufacture: 1997. 9) Horizontal laminar flow machine Marchhart LF-ZP-Horizontal, year of manufacture: 2020. 10) Accumulating roller conveyor RBS 140, year of manufacture: 1998. 11) Ointment pump Netzsch BEF200/NM045BH, year of manufacture: 2022. Documentation is available. On-site inspection is possible. Dksdpfxsuf T Nlo Aa Hjt

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Dsdpfxozc D Dks Aa Hokt Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 2000, Kellenberger 600 U cylindrical grinding machine Condition: Used Year of manufacture: 2000 Technical data: Table: Distance between centers: 600 mm Travel: 900 mm Travel per handwheel revolution, coarse/fine: 20 / 2.5 mm Travel per division on the handwheel: 0.05 mm Speed, hydraulically continuously variable: 0.02 - 6 m/min Reversal travel, minimum: 2.5 mm Dwell time during reversal, continuously variable: 0 - 5 sec Swiveling range: 11 degrees Cross slide: Travel with feed handwheel in fine or coarse mode: 220 mm Travel per handwheel revolution, coarse/fine: 8 / 1 mm/ø Division on the handwheel: 5 µm/ø Division with micrometer adjustment: 1 µm/ø Rapid traverse, hydraulically: 40 mm Feed, hydraulically: 0.95 mm/ø Form grinding: Feed rate: 0.25 - 25 µm/sec Surface grinding: Feed increments per table reversal: 130 µm/ø Dodpfxey T E Rzj Aa Hokt Grinding spindle head: Grinding wheel for external cylindrical grinding: 400 x 50 x 127 mm

Condition: excellent (used), functionality: fully functional, KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 1000 U YEAR OF MANUFACTURE: 2000 PARTIAL OVERHAUL: 2026 Dkjdpsyf E Susfx Aa Hot Center height: 175 mm Grinding length: 1000 mm Equipment: - Standard accessories - Workpiece spindle stock, standard MK5 with adapter flange DIN 55027, size 5 - Splash guard for the above - Tailstock with micro-adjustment, MK4 - Internal grinding device with protective cover for the grinding spindle D: 80 mm for belt-driven spindles - FISCHER internal grinding spindle, type HJN 842 including grinding mandrels (4 pieces, customer's choice) - Chuck HJNZ 42 - Oil mist lubrication system for HJN spindles - STREULI magnetic paper band filter system, type: SPB 2 - Coolant supply through the workpiece spindle - HEIDENHAIN digital length measuring system in X and Z axes - Sinus scale on the workpiece spindle stock including alignment mandrel MK5 - Permanent magnet chuck, D: 200 mm - Three-jaw chuck, D: 160 mm - Four-jaw chuck, D: 160 mm - Collet chuck system for Schaublin collets B32 - Set of collets B32, D: 1.0-30.0 mm, graduation 0.5 mm (59 pieces) - Indicator stop for table swiveling with 1/100 mm indicator - Table fixed stop - Truing stop for internal grinding - LED machine light - Various grinding wheel flanges, left (2 pieces) - Pneumatic upper slide relief - Swiveling truing device for truing during external, surface, or internal grinding - Set of vibration-damping pads - New three-color paint finish (light gray RAL 7035 / blue RAL 5012 / dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - Documentation - CE conformity

Condition: used, Year of construction: 1994, operating hours: 34,000 h, machine/vehicle number: LC613, Used line tetra pak TBA 8 - 1L slim 6000 PPHTechnical Specifications & Performance DataThis second hand complete bottling line is engineered for industrial packaging of aseptic carton containers, centered on the renowned Tetra Brik Aseptic platform. Designed for beverage production environments that demand hygiene and reliability, it provides end-to-end handling from aseptic filling through cap application to final case packing. As a used bottling line, it offers a cost-effective route to expand capacity while maintaining quality standards.Main filler: Tetra Brik Packaging Systems AB TBA 8 / 1000 SLIMConstruction year (main filler): 1994Package format: 1.0L Slim cartonSpeed: 6000 Packs/hour (PPH) Auxiliary equipment: Tetra Pak Cap Applicator 21; Tetra Pak Cardboard Packer 70Line application: Aseptic carton filling with downstream capping and case packingCompliance: CE markedAdvanced Automation & Control SystemsThe line leverages factory-integrated automation from the Tetra Brik Aseptic platform, designed for consistent performance and operator-friendly control. Safety interlocks and guarded access points support secure operation during beverage production. Standardized control architecture streamlines start-up, shutdown, and recipe management for the 1.0L Slim carton format.Centralized operator interface for coordinated filler, capper, and packer functionsAutomated sequences for aseptic filling and downstream handlingSafety circuits and emergency-stop devices for protected operationDesigned to support quick diagnostics and routine maintenance tasksProduction Line Integration CapabilitiesThis used bottling line integrates aseptic filling with cap application and case packing to create a cohesive industrial packaging solution. It is suitable for beverage production environments requiring carton handling and end-of-line packing. The cap applicator 21 and cardboard packer 70 are configured to work inline with the TBA 8 / 1000 SLIM, minimizing transfers and ensuring stable throughput.Inline configuration from filler to cap applicator to case packerOptimized for 1.0L Slim carton containersCompatible with standard conveyor and accumulation layoutsDesigned for inline operation; can be adapted to existing conveyor systemsMachine Condition & Maintenance HistoryOffered as a second hand, complete bottling line in working condition and ready for operation. It presents an efficient option for facilities seeking a pre-owned aseptic carton solution without the lead times typical of new equipment. Routine recommissioning and line integration services are recommended according to site standards.Operational status: Ready for operationCommercial status: Used/second hand industrial packaging lineOperational Performance & VersatilityThe TBA 8 / 1000 SLIM is a proven aseptic filler for carton containers, engineered for stable, hygienic beverage production. Downstream, the cap applicator 21 ensures accurate closure application, while the ... Djdpsyvpt Esfx Aa Hjkt

Condition: excellent (used), FMC 652 Automatic Can Seamer – Stainless Steel The FMC 652 automatic can seamer is designed for continuous, hermetic sealing of metal containers using a double seaming process in industrial production and canning lines. The equipment receives pre-filled cans, positions the lid onto each container, and mechanically performs the closing operations necessary to securely join the can body with the lid. Its automatic configuration allows it to be directly integrated with fillers, depositors, and other equipment in a canning line. MAIN FEATURES -Manufacturer: FMC -Model: 652 -Type: Automatic can seamer -Application: Metal containers -Automatic and continuous operation -Mechanical double seaming system -Continuous can feed -Lid feeding and positioning system -Synchronization between container input, lid, and closing operation -Motorized industrial drive -Adjustment according to installed format -Integrated control panel -Construction primarily in stainless steel -Protective casings in mechanical areas -Compact and robust structure -Designed for continuous industrial operation Dedpfx Aewn Dmdoa Hjkt -Integrable into automatic canning lines PROCESS Pre-filled cans arrive automatically at the FMC 652, where they are separated and positioned for sealing. The corresponding lid is fed and placed onto the container body. Subsequently, the closing mechanism performs the successive operations necessary to form the double seam, creating a hermetic seal between the lid and the can. Once sealed, the containers are automatically discharged and can continue to: Can washers Seam inspection systems Weight checkers Autoclaves/retorts Pasteurizers Coolers Labeling machines Case packers Palletizers APPLICATIONS Especially suitable for canning industries processing fish, meat, vegetables, legumes, prepared meals, and other canned foods. The compatible can diameters, heights, and formats will depend on the tooling and adjustments currently installed in the seamer. The FMC 652 is a compact industrial solution for automating one of the critical operations in a canning line: achieving a uniform and hermetic mechanical seal of the metal container. Machine available for inspection. Additional technical information, can formats, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - Center height : 175 [mm] - Table orientation : 9 [°] - Universal wheelhead Dodpexy S A Iofx Aa Hjkt - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Motor power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 - Orientation of grinding wheel holder headstock : 270° (3 x 90 °) - Boring for internal spindle : 90 [mm] - Orientation of part holder headstock : 180 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Motor power : 0,9 [kW] - Inner cone tailstock : Morse 4 - Tailstock sleeve travel : 30 [mm] - Dimensions : 2860 x 1680 x 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Hydraulic tail stock - Lubricating tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-key steady rests - 1 three-key steady rest - 1 set of drive knobs - Various wheel holders

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, Submitting a bid obligates you to collect the item by September 21, 2026! TECHNICAL DETAILS Sheet size: max. 3,048 x 1,524 mm Z-axis stroke: 70 mm Sheet thickness steel: 20 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminum: 12 mm Positional deviation Pa: ± 0.1 mm/m Positional scatter Ps: ± 0.05 mm Table load capacity: 750 kg Table changeover time: approx. 35 s Dksdpfxozwmn To Aa Het Positioning speed X/Y axis parallel: max. 100 m/min Positioning speed X/Y axis simultaneous: max. 140 m/min Axis acceleration X/Y: max. 12 m/s² Cutting speed: max. 50 m/min MACHINE DETAILS Beam source: ByLaser 4400 Laser type: CO₂ laser Laser power: max. 4,400 W Wavelength: 10,600 nm Machine weight: 12,000 kg Laser weight: 1,700 kg EQUIPMENT 2 cutting heads with 5-inch and 7.5-inch lenses