Used Hera Tk 3000 X 10 for sale (78,269)

Condition: new, Wide span shelving, new dimensions: L 2550 x H 3000 x D 600 mm incl. 4 shelves shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x3000mm unassembled, incl. cross and diagonal braces, Kdodpfxocfb Axj Ampsk plastic base plates 8x crossbars 2450mm, incl. safety pins 4x shelves 2440x549mm, thickness: 22 mm

Condition: new, Wide span shelving, new Dimensions: L 2550 x H 3000 x D 800 mm incl. 4 shelves Shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving consisting of: 2x shelf uprights, 800x3000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 2450mm, incl. locking pins 4x shelves 2430x745mm, Thickness: 22 mm Kdedpfxocfbyzj Ampok

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Kdedpfx Amox Tgr Tepek Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2000, Technical specifications: Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Kdodeymgrrepfx Ampek Weight: approx. 6.5 tons The seller accepts no liability for typographical or data transmission errors. The machine’s appearance, technology and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Kdedpfxjhqnl To Ampok Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: used, plate width 3000 mm plate depth 2000 mm Kdodpfxjud Iw Uj Ampjk plate height 230 mm weight of the machine ca. / t Clamping plate Dimensions: 3000 x 2000 x 230 mm T-slot dimensions: 42 x 72 x 74 (H) The images are for illustrative purposes only. More pictures will follow.

Condition: as good as new (ex-display), Carbide end mill Kedpedwbklofx Ampsdk Make prototype H 4 1200 17 10 2 10 x 22 / R 2 2 units available

Condition: as good as new (ex-display), Shell end mills Make Strasmann 150 x 95 NR HSS CO 10 Spir. 800 mm 545214 Kodpfedwblbox Ampedk

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 990101, turning length: 3,000 mm, turning diameter: 1,200 mm, Heavy-duty lathe Seiger SLZ 1200 x 3000 with Siemens cycle control Heavy-duty lathe, Manufacturer: Seiger, Model: SLZ 1200 x 3000. This machine is equipped with a Siemens Sinumerik cycle control (Teach-In system). Features include an AC main drive, faceplate, 2x chip conveyors, hydraulic unit, and a separate electrical cabinet. Documentation and toolholders are available. Machine is supplied without tailstock. Inspection and test run under power can be arranged by appointment. Working Area Distance between centers: 3000 mm Swing diameter over bed: 1200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle bearing diameter (front): 190 mm Spindle bore: 104 mm Speed range: 5 – 900 rpm Max. torque: 6000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Kjdjytc Hxspfx Ampsdk Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Mounting Tool shank cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. power consumption: 200 A Workpiece Weights Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Mounted only in faceplate: 1,800 kg Dimensions / Weight Machine: approx. 6400 × 2200 × 2300 mm Bed base: approx. 7700 × 1300 × 2500 mm Additional hydraulics: approx. 800 × 500 × 900 mm Machine weight: approx. 14,000 kg Bed base: approx. 3,500 kg Electrical cabinet: approx. 1,000 kg

Condition: used, Year of construction: 2008, turning diameter 720 mm turning length 3000 mm centre height 360 mm spindle bore 106 mm turning speed range 1 - 1800 U/min tailstock quill taper MT 6 workpiece weight max. 3800 kg total power requirement 36 kW weight of the machine ca. 6100 kg dimensions of the machine ca. 4800 x 2450 x 2000 mm Kdedpsw A Sqmjfx Ampok CNC lathe - cycle-controlled Equipment: - Chip conveyor - Coolant device - 3-jaw chuck Ø630 mm - MUTLI-FIX quick-change holder - Live center - Machine light

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X Kdsdpfsgvkc Nox Ampsk

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 7D 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Kdodpogvkdbjfx Ampjk Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, 3000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 12 Stck. work height max. 800 - 950 mm Colour blau / rot weight 200 kg - straight version Kdedeuap S Sspfx Ampjk - stable construction - high load-stable stability - Height-adjustable feet

Condition: new, 3000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 12 Stck. work height max. 660 - 815 mm Colour blau / rot weight 200 kg - straight version - stable construction Kodpstv Rf Uofx Ampedk - high load-stable stability - Height-adjustable feet

Condition: new, 3000 mm Working width 400 mm Wheel width 400 mm Kdsdpjp S Ddfofx Ampsk roll diameter 60 mm number of rolls 12 Stck. work height max. 810 - 910 mm

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm Ksdpfx Amjgvkc Tjpsdk weight of the machine ca. 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP S54 Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Kdodeiivgrjpfx Ampsk Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm from pipe diameter 1500 mm Rolling capacity (full working width) 12 mm Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Kdedjiivc Dopfx Ampsk Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3163 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Kdodpfx Aoiivfqempsk Number of Rolls: Four Geometry of the side rollers: planetary guide Working length: 3000 mm Top roll diameter: 630 mm Lower roll diameter: 570 mm Side rolls diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800mm Width: 3,600mm Height: 3,550mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 70 mm Bending performance (full working width) 60 mm from pipe diameter 3150 mm Rolling capacity (full working width) 55 mm Bending capacity (full working width) 50 mm from pipe diameter 820 mm Standard equipment: Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Kdsdpfx Ajiivgysmpok Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package Kedoiink Sopfx Ampsdk CNC control PGS-ULTRA

Condition: new, functionality: fully functional, Year of construction: 2026, max rolling capacity (cold): mm. 32 max prebending capacity (cold): mm. 24 at diameter mm. 2050 with material yield strength N/mm2 260 working length: mm. 3050 number of rolls: four top roll diameter mm. 410 pinching roll diameter mm. 390 driven rolls : two rotation speed 5 m./min. rolls rotation: hydraulic installed power: 30 PS Voltage 400V, 50Hz, 3Ph Inkl.: - hardened & polished rolls - cone bending device - electronic rolls parallelism Kdodpfx Amjf T Rzfepjk - Siemens PLC Control - CE certificate - control console on wheels

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Kjdpfx Asc S N Nqompedk Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine

Condition: used, Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 3,000 mm, turning diameter: 630 mm, spindle bore: 90 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 2 rpm, travel distance X-axis: 355 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 10 W, rapid traverse X-axis: 8,000 m/min, rapid traverse Z-axis: 5,000 m/min, total width: 1,850 mm, quill travel distance: 180 mm, quill diameter: 100 mm, quill stroke: 180 mm, workpiece weight (max.): 3,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, POREBA CNC TRP 63 Kedsyhp Ekspfx Ampodk Year of manufacture: 2002 Condition: used Machine under power, inspection possible Technical data: • Type: TRP 63 MN • Control: SIEMENS SINUMERIK 810D • Serial number: 7402-09-03006-03 • Centre height: 325 mm • Centre distance: 3000 mm • Spindle bore: Ø 90 mm • Main drive: 10 kW • Power supply: 3 × 380 V / 50 Hz Equipment: • MULTIFIX C tool turret (without holders) • Tailstock with manual quill feed • 2 electronic handwheels • Chip conveyor • Coolant system (pump integrated in chip conveyor) • Rear safety guard

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape, heating sleeve -Type: Ø150 x 150 mm -Item No.: 34-6195 -Heating power: 3000 W -Voltage: 230 V Kdodjlvylcspfx Ampok -Quantity: 1x heating cable included -Price: per piece -Dimensions: 215/170/H150 mm -Weight: 2.0 kg