Used Haas Haas Vf-3 for sale (63,599)

Condition: good (used), Year of construction: 2017, functionality: fully functional, The machine is in very good technical condition; testing is possible by prior arrangement. Dcodjyr Spyspfx Ahgoi

Year of construction: 2007, condition: used, THERMATOOL High Frequency Welding CFI 350 kW VF Fully revised in 2026 by Thermatool specialists Technical specifications Output power: 350 kW Dcodpfx Asymadbshgoi Welding frequency: 180 - 300 KHz Input voltage: 380 VAC / 50 Hz Total installed power 525 kVA Output power: 350 kW Welding-frequency: 180 - 300 KHz Input Voltage : 380 VAC / 50 Hz Total installed power: 525 kVA

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Djdpfx Ajx Eu Uyjhgsci

Condition: ready for operation (used), Bosch UVF 100M/4B-12S 920/3507813-3, serial number 104-914339, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. Dsdei D Hg Uspfx Ahgjci

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 001/003, used, normal signs of use, 100% functional, scope of delivery as per photos Dcsdpfoxaigkex Ahgji

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 002/003, used, normal signs of use, 100% functional, scope of delivery as per photos Dedpfx Asxaigqshgjci

Condition: ready for operation (used), Electro Adda FV71FE-8/2, 3-phase motor with Bonifiglioli bevel gear unit MVF 49/P (i=7), serial number as shown in the photo, mounting hole spacing: 63 x 63 mm, drive shaft diameter: 30 mm, used, normal signs of wear, 100% functional. Djdpfji D Htcjx Ahgjci

Condition: new, Manufacturer No.: UVF2D5003 Dcedpsw Uq A Djfx Ahgji

Condition: used, Continuous vacuum filler for straight filling and portioning Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Electric power: 9.5 KW Machine dimensions in cm: Dcodjh Uxxtjpfx Ahgei Width: 175 Length: 140 Height: 205 Delivery time: 20 working days after advanced payment

Condition: new, Year of construction: 2026, output frequency: 50 Hz, nominal power (apparent): 7 kVA, Dynaset hydraulic driven generators direct from stock! Types; Dcedpeic U Hdofx Ahgoi HG3,5S-E230SE23-15-VF HG5S-E230SE23-21-VF HG6,5E-E400SS23-34-VF

Year of construction: 2015, condition: excellent (used), Polygon and surface machining, gear and spline shaft machining, gear tooth pointing, shift stop machining, chamfering and deburring, SCUDDING Dcsdpfxjxupg Te Ahgsi See document

Condition: like new (used), Year of construction: 2017, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, table length: 3,500 mm, table width: 1,750 mm, spindle speed (min.): 24,000 rpm, Heidenhain iTNC 530 control Main spindle HSK-A 63 Speeds: 1-24,000 rpm Tool changer for 50 tools Through-spindle cooling Dcsdpfow S T Iqox Ahgji 5-axis milling machine with simultaneous milling head (Gabelkopf)

Year of construction: 2025, condition: new, Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute; suitable for volumes from 200-1000ml; accuracy: +/- 1.5%; max. film width: 320mm; bag width: 100-160mm (depending on pouch type); bag length: 95-165mm; 0.7m³, 6bar; 380V, 3.9kW; machine dimensions: 1700x1100x2950mm; weight: 720kg. Djdpfx Ahev Nmznjgeci That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2019, operating hours: 69 h, condition: like new (used), functionality: fully functional, Spray cleaning system with basket rotation Dsdpfx Aowzkq Nshgjci Batch size: 400 x 600 x 280 You can find more systems on our website under Used Systems.

Condition: used, Year of construction: 2005, FANUC 160 I-MB control KNOLL chip conveyor, type 1200 S-2, made in 2012 Dcedpfefxgiyox Ahgei 4 workstations

Condition: refurbished (used), HANDTMANN VF-830 F.P.A. PCM The machine after capital renovation. All bearings and sealings in this machine are new. 3 months warranty for parts. Machine with clipper socket. Machine with loading. Instrumentation: grease, grease gun, rotor key, funnel key, holding device key, scraper, set of funnels and technical documentation. Delivery time: 2 weeks Dcjdjyxntcepfx Ahgoi WITH: Linking gearbox AG-410 Holding device HV-414

Condition: excellent (used), functionality: fully functional, Handtmann VF 830, AL-System 228-01, 242-16 Vacuum Filler with AL Hanging and Linking System Vacuum filler VF 830 with AL-System 228-01 for linking/hanging as well as hanging unit 242-16. The set is designed for fully automated production of meat products, particularly sausages in natural, collagen, and artificial casings. These machines deliver high portioning accuracy, productivity, and reliability in continuous operation. 1. Handtmann VF 830 Vacuum Filler Manufacturer: Handtmann Model: VF 830 Dcjdpfx Aoxyrczshgei Serial number: 38725 Year of manufacture: 2016 Power: 6.0 kW Power supply: 200–260 V / 17.3 A 380–440 V / 9.1 A 480–575 V / 7.2 A Frequency: 50/60 Hz The VF 830 is a high-quality vacuum filler designed for the precise dosing of meat mixtures and other food masses. It ensures consistent portioning and a high degree of product repeatability. 2. AL-System – Handtmann AL-System 228-01 Manufacturer: Handtmann Model: 228-01 Code: 40287 Serial number: 16800980 Year of manufacture: 2017 Power: 5.5 kW Power supply: 400 V / 3~ Current: 8.3 A Frequency: 50 Hz Weight: 655 kg The AL (Automatic Line) system handles automatic twisting, separating, and portioning of sausages in a process integrated with the vacuum filler. It provides high performance and precision in linking, and supports operation with various casing types. 3. Hanging Unit – Aufhängeeinheit 242-16 Manufacturer: Handtmann Model: 242-16 Code: 38774 Serial number: 10903245 Year of manufacture: 2016 The 242-16 hanging unit enables automatic hanging of sausage loops onto rods in the production line. It ensures reliable, high-speed operation and full integration with the AL system.

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark Djdpfx Aevv Rfkohgjci We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye CE Mark Dedpfxjvv H Hds Ahgeci We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: used, Technical details: Dcodpou Nfnkofx Ahgji pressure: 63 t distance between columns: 900 mm no. of strokes: ca. 75 Hub/min ram adjustment: 80 mm stroke adjustable from - to: 3-100 mm Table dimensions: 900 x 600 mm throat: 310 mm dayligth: max. 350 mm drive power: 11 kW voltage: 380/220/24 V frequency: 50 Hz operating pressure: ca. 150 bar oil volume: 500 l safety distance: 150 mm passage opening in table: 200 mm total power requirement: 11 kW weight of the machine ca.: 4,0 t space requirements of the machine approx.: L:1,8 x B:1,8 x H:3,7 m DIFFERENTIAL PATH PRESS HIGH SPEED PRESS - High-speed press, C-stand - Compressed air connection: approx. 5 bar Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D. *

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Dsdpozd Tcdjfx Ahgjci Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: excellent (used), Year of construction: 2020, Traverses XYZ: 610 x 406 x 406mm, 400mm Diameter table, Dcsdszg Enqopfx Ahgji max table weight 226kg, table tilt +120°, -35°, 22.4kW, 10000rpm, BT40, 30 station tool changer, coolant, swarf conveyor

Condition: good (used), Year of construction: 2020, Maximum cutting diameter 305mm, maximum machining length 406mm, bar capacity 63.5 mm, spindle speed 4000 rpm, 20 hp spindle motor, Dsdozg Edljpfx Ahgjci 12 station turret, coolant, and swarf conveyor, 3 jaw chuck, toolsetter,

Condition: used, Year of construction: 2015, operating hours: 17,260 h, functionality: fully functional, machine/vehicle number: 1121106, rotational speed (max.): 15,000 rpm, spindle nose: BT40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Haas 750SS 5 Axis Milling Machine Dedpfozic Tpsx Ahgjci Machine built 2015 and has been well maintained. Only making Aluminium components. Manufacturing parts for the motorcycle market. 5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centres are cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750SS has an integrated high-speed, dual-axis trunnion table with a 500 mm diameter platter that features standard T-slots and a precision pilot bore for fixturing versatility. The trunnion provides +120 and -35 degrees of tilt and 360 degrees of rotation to provide excellent tool clearance and large part capacity. • 5-axis simultaneous machining • Powerful inline direct-drive spindle • High-speed trunnion table • Thru spindle coolant, bed wash and flood coolant • Swarf Conveyor BT40 Spindle with spindle speed up to 15,000 rpm 39 Tool carousel, with pre select. Tool probe and Tool Setting function The machine is still in daily use, the hours will increase as a result. Viewing by prior arrangement. Buyer to arrange collection at their own expense. Price is £60,000 plus Vat where applicable. Sold Ex Works

Condition: good (used), Handtmann VF628 vacuum filler with PVLS143 high speed linker cutter from 2021 and GS300 auto tray loading system consisting of GM310 and ZB311. Rarely available. We can offer an additional similar setup with VF622 instead of VF628. Dsdpsvvxumofx Ahgjci