Used Complete Powder Coating Line 7.2 M for sale (78,524)

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡 Pjdpfx Aheflk Awsljpt

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Ppodpfx Aofzccnshlst 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7" Touchpad Pjdpsfzkrnsfx Ahljpt Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Ppodpfx Asfz A Iwehlst Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Pjdpeflmdwsfx Ahlept Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ Psdpfx Aoyg H Dhohlept At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Ppodpfx Asfzciqshlet Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events Ppodpfx Ahefzkqmsljt You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Ppsdpfx Ahofz Nb Tsljt Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Ppedpfx Asfz U S Ejhljt Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, 7" Touchpad Pjdpjfz U Tijfx Ahlopt Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Pedjywxraepfx Ahljpt Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: excellent (used), GEA OPF600 OptiFlour preduster. Has come as part of a 600mm coating line from a meat-free factory. All other machines available to make a line. Pedpfxev Ihnys Ahljpt

Condition: good (used), Marel Townsend Stork rotary crumbing machine in lovely condition. Ppsdpfsmqk Twex Ahlet

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: BUD-MASZ Monterrey tile profile roofing sheet production line Condition: used, but fully operational. The line is currently connected to production – it can be tested on-site. Technical specifications: Manufacturer: BUD-MASZ (Poland) Profile: Monterrey Year of manufacture: 2007 Motor power: 15 kW Designed for forming steel roofing sheet with tile profile Robust frame construction ensures stable and precise operation Line purpose: Ppedpfx Ahsxhgl Tolet The equipment is intended for profiling steel sheets into roofing sheets with a tile imitation profile. Suitable for both serial production and custom orders. Manufactured in Poland, ensuring reliable quality and long service life. The machine is connected – inspection and test run are possible. If you have any further questions, we will be happy to assist you.

Condition: not inspected (used), functionality: unexamined, ⚠️ Important Notice: For Business Customers Only (B2B) This sale is exclusively intended for entrepreneurs as defined by § 14 BGB (commercial operators, self-employed persons, freelancers). Sale to private individuals (consumers) is excluded. By submitting a bid or making a purchase, you expressly confirm your status as a business entity and that the acquisition is for your commercial or self-employed professional activities. _____ For sale is a strip coating line. The system originates from insolvency assets and was in successful operation until the facility was closed. Technical specifications & capacities: • Material: Suitable for aluminum and stainless steel coils. • Strip width: 80 mm up to max. 600 mm. • Material thickness: 0.1 mm to 2.0 mm (for aluminum). • Processing speed: approx. 20–25 m/min. • Coil weight: Max. 3,000 kg. • Inner diameter: 400 mm (expandable to 500 mm with available adapter chucks). • Coating options: From narrow color stripes (starting at 7 mm) up to full-surface coating. • Temperature range: Oven operation at approx. 250°C. System design & components: • Infeed: Expandable decoiler with height-adjustable coil transport cart (load capacity 3,000 N). • Coating unit: Double coater for precise paint application using steel roll deflection. • Drying: Drying and firing zone with two Eclipse gas burners and control panel. • Safety & Environment: FID probe for continuous monitoring of solvent concentration in the oven, including control unit. • Cooling: Cooling section with fresh air supply before exiting the oven. • Post-processing: Integrated slitting device for strip longitudinal cutting (incl. slitting knives and spacer rings). • Outfeed: Hydraulic strip guiding, friction plate brake, and transfer arms at the recoiler. Scope of delivery: • Complete system as described. • Accessories (spacer rings, slitting knives, adapter chucks). Inspection & transaction: Ppedsyw Hiyjpfx Ahlst • Condition: Used, fully operational up to decommissioning. • Location: Wuppertal. • Dismantling/transport: Dismantling and transport to be carried out by the buyer at their own expense. • Invoice: You will receive a proper invoice with VAT shown separately. Terms of sale and delivery: • Condition: The system is sold as is from its current location. • Disclaimer: As this is a B2B transaction between professionals, the sale is made to the exclusion of any warranty and guarantee. • Inspection: On-site inspection is expressly recommended.

Condition: ready for operation (used), functionality: fully functional, Complete line for filling and packaging wine bottles. For a full description, see the attached PDF file. Pedpfeyn I Tmsx Ahljpt

Condition: excellent (used), Year of construction: 2020, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 3294, type of input current: three-phase, power: 90 kW (122.37 HP), input voltage: 400 V, We are selling press line from Nova pellet, 2019 production and 2020 first year of production start. Ppodpfx Ahewahhcjljt -Pellet press N-MIDI 90 KW 14.000 hrs(very good and daily maintaince, 2026 new rollers and die)-2019 year -Transporting vertical elevator ca 10m height-2019 year -Cooling tower N-CO700-2019 year -Control cabinet-NEW UNUSED For aditional price we are selling heavy duty hammermill Miller M16(37kW electric engine)-NEW UNUSED-25.000€ netto We are selling only items above(without cyklon, filters etc.)! Line is in very good condition and had very good daily maintaince. For further informations, please write or call on our contact.

Year of construction: 2001, condition: ready for operation (used), This HEESEMANN BÜRKLE wood production line was manufactured in 2001. It features a comprehensive oil application line, including RBO vacuum feeding Tornado SC 1300, HEESEMANN MFA 8 with cross-lengthwise brushes, and BÜRKLE SLC 1400 roller application machines. Enhanced with a new Siemens control system in 2024, consider the opportunity to buy this HEESEMANN BÜRKLE wood production line. Contact us for more information. Pjdpex D Rh Rjfx Ahlopt Application Types Complete Production

Condition: ready for operation (used), Year of construction: 2003, operating hours: 2,500 h, functionality: fully functional, For sale: Complete TECMAT poultry slaughter line, sourced from a poultry abattoir. Features: - Capacity: 300 to 500 birds/hour - Overhead conveyor with stainless steel hooks - Rail length: 40 meters - Plucker included - Scalding tank with heating system - 3 troughs - Functional drive motor - Complete electrical control panel - Refrigeration unit - Stainless steel structure and accessories ✔ Complete line ✔ Professional equipment ✔ Disassembled and in storage ✔ Photos available prior to dismantling Ideal for: - Setting up a poultry abattoir - Short supply chain agricultural projects - Upgrading a processing facility Ppodpfx Ajx Rrtkohlst - Export Equipment available immediately. 💰 Price: €20,000 Photos and further information upon request.

Year of construction: 2019, condition: ready for operation (used), 2019 Clevertech Complete Palletiser Line, type AC422 HS1 Options: - 3 types of pallet rotation - 5 types of boxes Ppjdpoyma Slsfx Ahljt - Capacity per line: 20 tons per hour, total combined 40 tons. The complete line consists of: * 2x palletisers Phase 1 and Phase, year of manufacture 2017 * 1 wrapper, year of manufacture 2019 * pallet magazine * pallet infeed * labeller (located at the end of the line) Palletiser Brand: Clevertech Year of manufacture: 2017 Model: AC422 HS1 Type: palletiser Weight: 22,000 kg Wrapper: Brand: Clevertech Year of manufacture: 2019 Model: PF 80 Type: wrapper machine For more information please see the pdf file.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,593 mm, total width: 2,700 mm, type of input current: three-phase, warranty duration: 24 months, power: 6 kW (8.16 HP), input voltage: 400 V, compressed air connection: 6 bar, volume flow: 15,000 m³/h, filter area: 45 m², sheet thickness steel (max.): 2 mm, High Efficiency Powder Coating Spray Booth "HELSINKI"/ Powder Recovery Booth / Powder Coating Extraction Unit FREE DELIVERY IN EUROPE Industrial powder coating spray booth with high-efficiency powder recovery system, German IE5 fan technology, automatic pulse jet filter cleaning, and variable airflow control. Designed for professional powder coating operations requiring reliable airflow performance, efficient powder recovery, low maintenance, and robust industrial construction. Technical Data Power: 6 kW Electrical supply: 3-phase, 380–400 V, 50 Hz Compressed air requirement: 5–6 bar clean compressed air supply Airflow capacity: up to 15,000 m³/h (variable flow control) Fan: German-made high-efficiency IE5 fan with aluminium impeller Filter system: 3 x antistatic polyester cartridge filters Podpey N Ubzofx Ahlopt Filter media: 260 g/m² polyester with Teflon + aluminium coating Construction: 2 mm steel, powder coated Mobility: industrial lockable wheels Compressed air connection ports: yes Automatic filter cleaning: yes (pulse jet) Additional outlet safety filtration: yes Accessories holder / hose rack: yes Key Features High-efficiency powder recovery Automatic pulse jet cartridge cleaning Special multiport cleaning nozzles for improved filter cleaning performance Antistatic filter media prevents powder particle embedding Reduces static charge accumulation Easier cleaning and longer filter service life Variable airflow control for different production requirements Energy-efficient German IE5 fan technology Additional outlet filtration for safer operation Compressed air ports for cleaning gun and accessories Heavy-duty industrial construction Mobile design for flexible workshop layout Dimensions Width: 2700 mm Depth: 1608 mm Height: 2593 mm Suitable for Powder coating workshops Metal fabrication Steel structures Aluminium parts coating Industrial finishing lines Custom coating production Manufacturer: Brigas Industries OY Location: Finland Condition: New DISTRIBUTORS WANTED

Condition: used, Year of construction: 2006, operating hours: 43,950 h, machine/vehicle number: LC614, Used KRONES PET complete line for ESL 12000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET ESL applications with UV cap treatment and is aseptic-ready. Engineered around Krones equipment, it delivers consistent performance for 0.5L and 1.0L formats. The line is suitable for industrial packaging and beverage production, especially for sensitive products requiring extended shelf life.Line type: PET ESL with UV cap treatment; aseptic-ready configurationMaximum line speed: 12000 bph (based on 1.0L)Formats: Compatible with 0.5L and 1.0L bottle formatsNeck formats: 38mmContainers: Designed for PET bottle handlingBlow molder: Krones Contiform S8, 8 cavitiesFiller: Krones VODM-PET counterpressure volumetric filler, 32 headsLabeling: Krones rotary labeler with 10 plates (10000 bph) and Krones rotary labeler with 8 plates (8000 bph)End-of-line: Case packer and Fanuc robot palletizer for EuropalletsOperating hours: Approximately 43950 hoursManufacturing year (main equipment): 2006Model references: Contiform S8, VODM-PETAdvanced Automation & Control SystemsThe line integrates modern automation with centralized HMI for recipe management, production counters, and real-time performance monitoring. Automatic valve and pump control supports consistent filling conditions and stable operation at target throughput.Automated production functions with HMI-based controlPerformance setpoint management and production counter visualizationUV cap treatment system integrated for ESL complianceDesigned for hygienic operation and stable fillingQuick recipe selection for 0.5L and 1.0L formatsProduction Line Integration CapabilitiesThis second hand complete bottling line is configured for inline operation from PET preform blowing through filling, labeling, case packing, and robotic palletizing. Conveyors and accumulation ensure smooth product flow with minimal stops.Inline configuration from blow molding to palletizingDual rotary labeling machines to optimize throughput across formatsFanuc robotic palletizer for Europallet patternsFormat changeover between 0.5L and 1.0L with dedicated change partsSuitable for beverage production workflows requiring ESL conditionsMachine Condition & Maintenance HistoryThe line remained in production until December 2025. It is still connected to the electrical network and can be demonstrated running. Overall hours are approximately 43950, reflecting a well-utilized but maintained system typical for industrial packaging environments. No refurbishments are declared, and the equipment has remained in service through recent operations.Operational until December 2025Connected and can be seen runningApprox. 43950 operating hoursCommercially maintained in a productio... Pedsywk Srjpfx Ahlspt

Condition: used, mileage: 267,000 km, power: 130 kW (176.75 HP), first registration: 07/2019, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: blue, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Mercedes Benz 818 L/ 7200 mm flatbed/ LBW, Fgnr: 384475/ New Tüv with new brakes !!! Battery 165 Ah, Suspension: Front springs 3,6 t, Window lifter electric, Gearbox - mechanical, Gearbox 6-speed - Type: G 70-6, Holder spare wheel sideways, Engine brake, Frame overhang - extension, Spare wheel, Switch tail lift, Seats in cab: Driver's seat swing seat air-conditioned, Stabilizer rear axle reinforced (for extremely high load) Pjdot Eluzjpfx Ahlspt EURO 6 emissions standard, Axle configuration: 4x2, Axle load front axle 4.1 t, Approach/front mirror, Exhaust tailpipe to center of vehicle, Exterior mirrors electr. adjustable, left, Cockpit Classic, Compressed air tank steel, Single-stage entry, Driver assistance system: Brake assist (Active Brake Assist), Driver assistance system: Lane departure warning, Cab: S ClassicSpace, Cab variant: ClassicSpace, Suspension: Leaf / air, Generator 100 A, Urea tank (AdBlue): 25 ltr, Lifting roof manual (steel), Rear axle disk wheel 325, Info display 10.4 cm with additional display, Body/structure: Chassis, Fuel tank: 120 l, Engine 5.1 l - 130 kW diesel (OM 934), Engine compartment encapsulation, , Front and rear axle disc brakes, Seat cover / upholstery: Fabric, Seats in cab: Single passenger seat, fixed, Rear mudguard, Tachograph / EC tachograph, Automatic daytime running lights, Rear underride guard fixed, Side underride guard, weight-optimized, Preparation for toll collection, Immobilizer, Gross vehicle weight 7.49 t

Condition: used, Year of construction: 1996, Manufacturer : Marchesini Model: MS 235 / AS 237 / BA 50 Year : 1996 Type : 4-seal pouch packaging line for powders. 1. Bagging machine Vertical automatic machine with intermittent movement for filling and sealing bags, for medium and high speed production lines, for powders. Volumetric shaving filler Mechanical speed: 100 strokes/min Range of formats : max reel outer diameter: 400 mm (800 mm with reel) max reel width: 800 mm (820 mm with waste) bag length: 60 to 120 mm Reel support trolley Ppsdjx R Alkjpfx Ahljt Hopper handling trolley Weight: 2100 kg 2. sachet counting unit 3. Cartoning machine Capacity : 70 cartons / minute Dimension A = 40 - 145 mm Size B = 20 - 80 mm Size H = 70 - 190 mm A+B = 190 mm Weight: 900 kg